智能制造网APP
智能制造网手机站
智能制造网小程序
智能制造网官微
智能制造网服务号
VE602
DVI Dual Link视频延长器+音频功能
VE602 Zoom In VE602 VE602
VE602 DVI Dual Link视频延长器具备音频功能，可使用Cat 5e线缆延伸DVI信号来源设备与显示设备之间的距离远达60m。Cat 5e线缆为现公大楼中的布线系统提供了简单且可靠的连接方式。
VE602使用ATEN技术可通过Cat 5e线缆以传输A/V信号，该技术使用ATEN默认的EDID模式，其功能可自动读取并储存远程显示设备的EDID信息。如要连接Dual Link视频信号，则需使用第二条Cat 5e线缆。
VE602支持立体声音频和宽屏幕分辨率，提供了远程DVI视频显示设备安装架构下所需的清晰影像及声音质量。
VE602DVI Dual Link视频延长器+音频功能
VE602 DVI Dual Link视频延长器具备音频功能，可使用Cat 5e线缆延伸DVI信号来源设备与显示设备之间的距离远达60m。Cat 5e线缆为现公大楼中的布线系统提供了简单且可靠的连接方式。
延伸DVI信号来源设备与显示设备之间的距离
长距离传输-最远可达60m
使用Cat 5e线缆连接本地及远程设备
使用ATEN EDID技术可通过一条Cat 5e线缆传输信号
使用第二条(从) Cat 5e线缆以连接Dual Link信号*
支持EDID读取模式-当发送器(VE602T)被连接至显示设备时，会自动读取并储存显示设备的EDID信息
视频分辨率-DVI Dual Link高达2560x1600@60Hz(40m)；DVI Single Link高达1920x1200@60Hz(40m)，1024x768@60Hz(60m)
支持音频功能
可通过8段式均衡器补偿调整开关优化显示质量
内建8KV/15KV ESD静电保护
支持宽屏幕分辨率
可安装于机架上
* 注意: 两条Cat 5e线缆的长度必须相同。
| 功能 | VE602T | VE602R | |
| 接口 | 视频输入 | 1 x DVI-D母头(白) | N/A |
| 视频输出 | N/A | 1 x DVI-D母头(白) | |
| 音频输入 | 1 x mini立体声插座(绿) | N/A | |
| 音频输出 | N/A | 1 x mini立体声插座(绿) | |
| 主(Main) | 1 x RJ-45母头(银) | ||
| 从(Sub) | 1 x RJ-45母头(银) | ||
| 电源 | 1 x DC插孔 | ||
| 按键开关 | 补偿开关 | N/A | 1 x 8段式旋钮 |
| LED指示灯 | 电源 | 1(绿) | |
| 连线 | N/A | 1(绿) | |
| 视频分辨率 | DVI Dual Link：2560 x 1600@60Hz(40m)， DVI Single Link：1920 x 1200@60Hz(40m)， 1024 x 768@60Hz(60m) | ||
| 耗电量 | DC5.3W，1.1W | DC5.3V，0.9W | |
| 作业环境 | 操作温度 | 0–50°C | |
| 储存温度 | -20–60°C | ||
| 湿度 | 0–80% RH, 无凝结 | ||
| 机体属性 | 外壳 | 金属 | |
| 重量 | 0.17kg | 0.18kg | |
| 尺寸 (长x宽x高) | 9.13 x 5.74 x 2.40 cm | ||
VE602
DVI Dual Link Extender with Audio
The VE602 DVI Dual Link Extender with Audio extends your DVI display up to 60 m away from your DVI source using Cat 5e cables. The use of Cat 5e cables provides a simple and reliable connection method that takes advantage of the wiring system in most modern office buildings.
The VE602 incorporates ATEN's technology that allows A/V signals to be transmitted over one Cat 5e cable. It uses ATEN default EDID, but is able to learn and save the EDID configuration of the remote display. For dual link video signals, simply use a second Cat 5e cable.
With support for stereo audio and popular widescreen video formats, the VE602 provides crystal-clear image and sound quality for installations where remote DVI
Extends the distance between the DVI source and DVI display device
Long distance transmission – up to 60 m
Uses Cat 5e cable to connect the local and remote units
Employs ATEN EDID technology that allows signal transmission over one Cat 5e cable
Uses a second (Sub) Cat 5e cable for dual link signals*
Supports EDID Learning – Automatically learns and saves the EDID data of the display to which the Transmitter (VE602T) is connected
Superior video quality – DVI Dual Link up to 2560 x 1600 @ 60 Hz (40 m); DVI Single Link up to 1920x1200 @ 60 Hz (40 m), 1024 x 768 @ 60 Hz (60 m)
Audio enabled
8 segment equalization adjustment switch optimizes display quality
Built-in 8KV/15KV ESD protection
Supports widescreen formats
Rack mountable
Note:
* The length of the two Cat 5e cables must be the same.
** Note: HDCP is not supported
| Video Input | Interface | 1 x DVI-D Female (White) |
| Impedance | 100 Ώ | |
| Max. Distance | 1.8 m | |
| Video Output | Interface | 1 x DVI-D Female (White) |
| Impedance | 100 Ώ | |
| Video | Max. Data Rate | 6.75 Gbps (2.25 Gbps Per Lane) |
| Max. Pixel Clock | 225 MHz | |
| Compliance | HDCP Compatible | |
| Max. Resolutions / Distance | Dual Link: up to 2560 x 1600@40m Single Link: up to 1920 x 1200@40m; 1280 x 1024@60m | |
| Audio | Input | 1 x Mini Stereo Jack Female (Green) |
| Output | 1 x Mini Stereo Jack Female (Green) | |
| Power | Connector: 1 x DC Jack Consumption: VE602T: 5.3 VDC, 1.1W; VE602R: 5.3 VDC, 0.9W | |
| Environment | Operating Temp. | 0 - 50°C |
| Storage Temp. | -20 - 60°C | |
| Humidity | 0-80% RH, Non-Condensing | |
| Physical Properties | Housing | Metal |
| Weight | 0.18 kg | |
| Dimensions (L x W x H) | 9.13 x 5.74 x 2.40 cm | |
| Carton Lot | 20 pcs | |
成立于 2004年，拥有十年KVM行业经验，为您提供完整的行业解决方案。HDMI DVI VGA、视频分配、切换、 延长、及高清信号转换接口。公司现已成为四川地区 Aten 宏正 代理商
