顺序波长色散X射线光谱仪

顺序波长色散X射线光谱仪WDX-4000是一种顺序式波长色散X射线光谱仪,广泛应用于地质,水泥,钢铁,环保等领域。特别适合用于大中型企业产品生产质量检测和控制。
顺序波长色散X射线光谱仪WDX-4000主要特点：
的测角仪的设计
●创新和火成钢皮带传动系统。这种的设计提供了无摩擦，没有反弹，稳定的运动，保证确的角度定位。
●8/28轴有独立的驱动系统和伺服电机编码器反馈
●永磁同步电机（PMSM）提供、最平稳的运动
●光学编码器0.0001°分辨率和0.0006°精度保证集成系统达到优良的性能。
多通道分析仪
●12位，80msps，大的AD采样系统、完整、准确地记录信号
●4096（12bit）通道分析仪基于高速FPGA架构和强大的DSP算法能够区分正确的X射线从噪声和杂散光
●能量色散作用是额外的。
ray Tube高压发生器
●标准功率kw系统给出了痕量元素的分析灵敏度和较高速度的分析
●薄铍窗（50um或75um）提供了X射线超传输，特别是低能量区
●60kV及140ma，（75kv 150mA是可选的）和灵活的设置有助于更精细的分析方法
●双循环水冷却系统，去离子水的电导率保持比1us由管寿命的树脂增加尽可能低的多。

顺序波长色散X射线光谱仪WDX-4000规格参数

Multi-channel Analyzer	12bit, 80Msps AD. 4096 channels analyze ability
	with FPGA hardware and robust DSP algorithm
	to discriminate signal and noise
Maximum count rate	FPC:2Mcps  SPC:1Mcps  SC: 1.5Mcps
Pulse shift & Gain correction	Automatic
Dead time correction	Automatic

一般规格

Sample Chamber			X-ray tubeMg
Type		Vacuum for solids	Windows		The thin beryllium window, 50um
Dimensions		51.5mm Øx40mm height, max.			or 75um, ultra-high transmission
Weight	Max. 500g including sample holder				Rhodium (Rh) as standard, option
	Dual position with anti-dust filter &
			Anode target material		includes Copper (Cu),
Sample loading	pre-vacuum pumping as standard				Molybdenum (Mo), Tungsten (W),
		feature. Analyzing one sample			Chromium (Cr), Platinum (Pt)
		while pumping the next one
Sample changer	Automation robotic changer system,		Operation		Tube remains powered on during
		high capacity up to 168 samples			sample holding
		3 spinning speed modes			Dual tube cooling water circulation,
Spinner			Cooling water		conductivity of deionized water is
		(low, medium, high)
					much lower than 1uS
HV Generator				Rating
Output		Selectable in steps of 1KV, 1mA	Power
	as standard. Fine step is optional				4kW
		by 12bit DA
Long Term Stability		0.01%/8 hours	KV/mA		20-60KV, 75kV is optional
Temperature Coefficient	50 ppm/°C (20 ppm/°C optional)				10-140mA, 150mA is optional
Goniometer			Optical Path
	Innovative steel-belt-drive system,		Channels masks		Single mask
Type		no friction, no backlash,			(fixed 27, 30 or 37mm)
		feedback by optical encoder,	Primary collimators		3 max: 100, 150, 300, 550,
		0/20 independent			700 or 4000 um, selectable
Maximum slewing speed		6000 • 20/min	Primary beam filters		4 max: Pb, Al, Cu with different
					thickness
Angular accuracy			Crystals		8 max: LiF420, LiF220, LiF200,
		0.003° 0 and 20			Ge111, PE002, lnSb, TIAP,
					multilayers for light element
Angular reproducibility		0.0002° 0 and 20			3 max: Flow proportional
			Detector		counter (FPC), Sealed Xe
Step scan range		Min. 0.0001°, Max.1°			proportional counter (SPC),
					Scintillation counter (SC)
Scanning angle range		PC:17° to 146°20	Optical Cabinet Past		Vacuum < 10Pa
		SC: 0° to 120°20