纤维磨耗机

　　腾达试验仪器厂：

　　一、简介：

　　纤维磨耗机适用于粒状木质纤维的筛分和磨损试验。由振筛系统和磨损系统组成，整机结构简单操作方便，运行时间可调。

　　1.Brief introduction of fiber abrasion machine:

　　The fiber abrasion machine is suitable for screening and abrasion test of granular wood fiber.Composed of a vibrating screen system and a wear system,the whole structure is simple and easy to operate,ａnd the running time is adjustable.

　　二、结构组成：

　　纤维磨耗机由研磨系统、振筛系统、控制系统和电机组成。

　　2.Structure composition:

　　The fiber abrasion machine is composed of a grinding system,a vibrating screen system,a control system and a motor.

　　三、技术参数：

　　振筛系统

　　★筛孔直径：4mm（适用直径为6.5mm粒状木质纤维）

　　★筛孔直径：2.8mm（适用直径为645mm粒状木质纤维）

　　★振频：50Hz

　　★振幅：2mm

　　研磨系统：

　　★由进料口、出料口、研磨室、研磨轮等组成

　　★研磨轮宽度4mm,直径280mm,

　　★研磨室内径：300mm

　　★研磨轮与研磨室侧壁间距：48mm

　　★研磨轮卷曲：长度50mm,宽度15mm,

　　★研磨轮旋转平面夹角30°.

　　★研磨轮转速为450±50r/min~

　　3.Technical parameters:

　　Vibrating Screen System

　　★Sieve hole diameter:4mm(applicable to granular wood fiber with a diameter of 6.5mm)

　　★Sieve hole diameter:2.8mm(for granular wood fiber with a diameter of 645mm)

　　★Vibration frequency:50Hz

　　★Amplitude:2mm

　　Grinding system:

　　★Composed of inlet,outlet,grinding chamber,grinding wheel,etc.

　　★Grinding wheel width 4mm,diameter 280mm,

　　★Grinding chamber diameter:300mm

　　★The distance between the grinding wheel and the side wall of the grinding chamber:48mm

　　★Grinding wheel curl:length 50mm,width 15mm,

　　★The angle of rotation of the grinding wheel is 30°.

　　★The grinding wheel speed is 450±50r/min~