智能制造网>产品库>工业安全（老分类）>工业电器>其它工业电器>>halstrup-walcher GmbH

halstrup-walcher GmbH

参考价	面议

参考价

面议

具体成交价以合同协议为准

公司名称广州市朝德机电设备有限公司
品牌
型号halstrup-w
所在地广州市
厂商性质经销商
更新时间2017/8/25 0:03:57
访问次数901

产品标签:

halstrup-walcher GmbH

在线询价收藏产品进入展商展台

联系方式：向小姐13826285285 查看联系方式

联系我们时请说明是智能制造网上看到的信息，谢谢!

索取相关资料

公司介绍主营产品

　　广州市朝德机电设备有限公司门负责为外用户采购中生产的机械零件包括：机械铸件，通用轴承，液压元件，工业泵、阀，五金工具，非标零件等产品。我们及致力于为的汽车制造、电力、化工、冶金、造纸等多行业的工业客户提供生产和维护所需的各类替换零件和OEM配套件。我们期待着与中的机械零、配件生产厂家建立长期互惠互利的伙伴合作关系，我们追求与零件厂共创双赢。湖北基依自动化自动化设备由批工控及外贸领域内的家人员组成，多年的从业经验使我们深知和谐社会，和气生财，越团队，核心在人的道理，因此的公司理念是“以和为贵，以民为本”，以降低能耗和成本，提高安全性和稳定性的“两低两高”为服务标准，为客户提供进口工业设备及备品备件的采购解决方案，力争使GM成为您采购工控产品的*选择和长期合作伙伴。

广州市朝德机电设备有限公司经过长期的经验积累和断开拓进取，目前在西欧以及日本产品上形成了明显的优势，并形成了物位、压力、流量、扭矩、角度、温湿度测量产品，过滤及润滑装置产品和安全节能产品等三大强项，业务涵盖设计选型、替换、改造、备件采购、维修等条龙服务内容，力争为内用户提供性价比Z的工控产品解决方案。

广州市朝德机电设备有限公司提供的产品主要包括：PLC,DCS,PAC,HMI人机界面/触摸屏，工业以太网，现场总线，变频器，逆变器，软启动器，运动控制（伺服系统，步进系统，PC运动控制卡，PLC运动控制模块，体化控制器，运动控制总线，伺服电机，直线电机，步进电机，控系统，工业机器人等），机械传动（包括减速机，制动器，离合器，联轴器，无变速机，丝杠，滑轨，导轨等），机器视觉（包括CCD/CMOS照相机，视觉传感器，图像处理单元，通讯/输入输出单元，监视器，监控器，视觉系统，条码识别，图像采集，光源等），传感器（包括光电开关，接近开关，行程开关，限开关，RFID系统，位移传感器，编码器，速度传感器，加速度传感器，超声波传感器，激光检测器，激光测距仪，角位仪/角度传感器，电量传感器，力测量传感器，光幕，微动开关，安全开关和接插件等），现场仪表（包括温度传感器/变送器，压力传感器/变送器，液位变送器，物位仪表，流量计，湿度传感器，露点仪，称重/配料仪表，红外测温仪，安全栅，仪表结构装置，执行器，阀门，液压气动元件，信号隔离器等），显示控制仪表（包括温控器，巡检/调节仪表，记录仪，电量仪表，转速表，显表等），分析测试仪表（水质分析仪器，气体检测/分析仪器，电工仪表，过程校验仪表，计量标准仪器，网络分析测试，故障诊断，振动监测，示波器，信号发生器等），执行机构（包括调节阀，电磁阀，电动执行器，阀门定位器，液压产品，气动产品等），工业安全（包括安全控制产品，安全光幕，安全开关，安全继电器，声光报警装置，安全栅，ESD等），低压电器（接触器，断路器，电机保护器，电机启动器，继电器，热继电器，固态继电器，可控硅，配电箱/柜，配电母线，配电系统，信号转换，防雷/浪涌保护器/抑制器，防爆产品，定时器，计时器，按钮开关，指示灯，接线端子，凸轮开关，报警装置，显示单元，工业键盘），电源（开关电源，线性直线电源，直流变换电源，交流稳压电源，逆变电源，UPS等），五金器具…

展开显示更多内容

物位、压力、流量、扭矩、角度、温湿度测量产品,过滤及润滑装置产品和安全节能产品

产品简介在线询价

halstrup-walcher GmbH线性传动装置气压表步进电动机测量变换器线性定位器

halstrup-walcher GmbH 产品信息

业代理 halstrup-walcher GmbH线性传动装置气压表步进电动机测量变换器线性定位器

广州市朝德机电设备有限公司

：
：郑杰克、向
： novosor : www.novosor.com
地址：广州市越秀区朝天路66号3F

系列：

Positioning systems

Back | Home > Products > Positioning technology > Positioning systems

德halstrup-walcher GmbH线性传动装置 气压表 步进电动机 测量变换器 线性定位器

Due to the wide variety of different models and options, positioning units from halstrup-walcher are eminently suitable for use in machinery and plant construction （packing lines, filling units, printing equipment, wood-processing equipment, metering pumps, valve control） and in medical technology and the pharmaceutical industry.

	PSE 21_/23_-8 Positioning system with economic DC motor, drive system, controller and integrated absolute position measuring system,. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Date iinterface CANopen/DS 301, Device Net Description \| Manual \| Datasheet \| STP file \|
	PSE 30_-8 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Iinterface CANopen/DS 301, Profibus, Device Net Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 30_/32_-14 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Iinterface CAN-Bus/DS 301, Profibus, Device Net Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 31_-8 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. CAN bus data interface. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 31_/33_-14 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Iinterface CANopen/DS 301, Profibus, DeviceNet Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 36_-8 Positioning system in stainless steel housing, horizontal construction, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, data interface = CAN-Bus/DS301, Profibus DP, Device Net. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 36_/38_-14 Positioning system in stainless steel housing, horizontal construction, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, data interface = CAN-Bus/DS301, Profibus DP, DeviceNet. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 37_-8 Positioning system in stainless steel housing, longitudinal construction, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, data interface = CAN-Bus/DS301, Profibus DP, Device Net. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 37_/39_-14 Positioning system in stainless steel housing, longitudinal construction, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, data interface = CAN-Bus/DS301, Profibus DP, DeviceNet. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 37_/39_-8/-14 RD Positioning system in a round, stainless steel housing, V4A design, nominal power output up to 35W, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute position measuring technique. Output shaft with a 10 mm external square shaft or a hollow shaft with adjustable collar; no reference run required; integrated position control; data interface: CAN-Bus/DS301, Profibus DP, DeviceNet. Description \| Manual \| Datasheet \| STP file \|
	PSE 359_14 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Iinterface CANopen/DS 301, Profibus, DeviceNet Description \| Manual \| Datasheet \| STP file \|
	PSE 34_-14 Positioning system with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, manually operated possible, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, joy key operation, data interface = CAN-Bus/DS301, Profibus DP, Device Net. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 31_-VG-14 Positioning system with a flange-mounted reduction gear, controller, gear, brushless DC motor and absolute measuring system for higher torque requirements. Machines and stops are refit automatically, which eliminates rejects due to operator error and significantly reduces downtimes. Data interface: CAN-Bus/DS 301, Profibus, DeviceNet. Description \| Manual \| Datasheet \| STP file \|
	PSE 42_ Positioning system with control unit, stepping motor, gear and absolute measurement system. Automatic re-fitting within minutes, no wastage as a result of operating errors, considerable reduction of downtimes. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 43_ Positioning system with control unit, motor, gear and absolute measurement system. Automatic re-fitting within minutes, no wastage as a result of operating errors, considerable reduction of downtimes. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 200 Actuator and position control loop for the positioning of rotating machine parts. Description \| Manual \| Datasheet \| STP file \|
	PSE 272 Positioning system. Complete unit consisting of actuator and position control loop. Simple set-point value, can be connected directly to SPC. Control range up to 20 revolutions. Protection class IP 65. Description \| Manual \| Datasheet \| STP file \|
	PSE 100 Positioning system with torque of up to 10 Nm, consisting of actuator and position control loop for the positioning of rotating machine parts. Description \| Manual \| Datasheet \| STP file \|
	PSE 172 Positioning system. Complete unit consisting of actuator and position control loop. Simple set-point value, can be connected directly to SPC. Control range up to 20 revolutions. Protection class IP 65.

Actuators

Back | Home > Products > Drive technology > Actuators

德halstrup-walcher GmbH线性传动装置 气压表 步进电动机 测量变换器 线性定位器

Due to the wide variety of different models and options, gears from halstrup-walcher are eminently suitable for use in building installations （e.g. for ventilation, exhaust air and flue gas dampers, for valves, window openers）, in medical technology （e.g. for dialysis pumps, X-ray equipment, recorders for ECG/EEG equipment）, for optical and electronic equipment （e.g. for scanners, measuring systems for ticket and card readers）, in machinery and plant construction （ink zone adjustment, limit-stop control, vending machines, metering pumps, filler units）.

Halstrup Stellantriebe ST 120 KG

ST 120 KG

Gear unit with synchronous or DC motor, limit on the angle of rotation and positional feedback via potentiometer.

Description | Manual | Datasheet |

Differential pressure transducer

Back | Home > Products > Pressure measuring technology > Differential pressure transducer

德halstrup-walcher GmbH线性传动装置 气压表 步进电动机 测量变换器 线性定位器

Differential-pressure transducers and calibration equipment for air and non-aggressive gases.
Due to the wide variety of different models and options, differential-pressure transducers and calibration equipment from halstrup-walcher are eminently suitable for use in ventilation and air-conditioning technology, for filter control, in clean rooms and medical technology, in mechanical engineering and as service equipment for assembly and maintenance work.
The pressure transducer and calibration equipment are available with calibration record or DKD certificate.

	PUC 24 Process monitoring device for clean rooms. Room pressure measurement with inputs for humidity and temperature sensors. Measured values are sent to the control module via a Profibus interface. Description \| Manual \| Datasheet \| Software \|
	PUC 28 Process monitoring device for measuring room pressure in clean rooms. The device is equipped with a smooth plastic exterior and additional input ports for connecting external temperature and humidity sensors. The device communicates with a master control via profibus （optional）. Description \|
	P 29 Differential pressure transmitter with TÜV certification for use with combustible gases, freely scaleable with a measuring range of 250 Pa to 100 kPa, high repeatability and precision due to automatic zero balance; available with calibration protocol or DKD certificate. Description \| Manual \| Datasheet \| Software \|
	P 26 Differential pressure transducer; freely scalable within a range of ± 10 Pa to ±100 kPa; automatic zero-point calibration provides excellent reproducibility and precision; optional RS 232 C interface; configurator available as an accessory. Description \| Manual \| Datasheet \| STP file \| Software \|
	P82 R Measuring transducer with square root-extracted output characteristic, which is thus suitable for the direct measurement of the volumetric flow rate via measuring orifice, concentric nozzle, flow grid, etc. Description \| Manual \| Datasheet \|
	PUE 94 Measuring transducer with high overload capacity for measurements that could be impaired by pressure fluctuations. Description \|
	PU/PI Measuring transducer with high precision and long-term stability for measuring the pressure in air-conditioning and ventilation units, for monitoring filling levels and for filter control, etc. Description \| Manual \| Datasheet \|
	PIZ Measuring transducer with two-conductor system 10 - 32 V, with high precision and long-term stability for measuring the pressure in air-conditioning and ventilation units, for monitoring filling levels and for filter control. Description \| Manual \| Datasheet \|
	PS 10 Measuring transducer preferably used as built-in device in air-conditioning and ventilation technology. Description \| Manual \| Datasheet \|
	PK 15 Measuring transducer with analog output for applications requiring an optional or acoustic signal as warning message. Description \| Manual \| Datasheet \|
	PS 27 Differential pressure transducer for simple air-conditioning and ventilation applications, highly sensitivity, excellent long-term stability, suitable for mounting on top-hat rails. Description \| Manual \| Datasheet \| STP file \|
	REG 21 Pressure controller, design in panel housing with large, bright LE-Display, with 2 adjustable relay outputs, which allows to realize a 2 or 3 step controller. In addition to the relay output there is an analogue output.

关键词：步进电动机 CAN

该厂商其他产品 >

在找 halstrup-walcher GmbH 产品的人还在看

	PSE 21_/23_-8 Positioning system with economic DC motor, drive system, controller and integrated absolute position measuring system,. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Date iinterface CANopen/DS 301, Device Net Description \| Manual \| Datasheet \| STP file \|
	PSE 30_-8 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Iinterface CANopen/DS 301, Profibus, Device Net Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 30_/32_-14 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Iinterface CAN-Bus/DS 301, Profibus, Device Net Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 31_-8 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. CAN bus data interface. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 31_/33_-14 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Iinterface CANopen/DS 301, Profibus, DeviceNet Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 36_-8 Positioning system in stainless steel housing, horizontal construction, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, data interface = CAN-Bus/DS301, Profibus DP, Device Net. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 36_/38_-14 Positioning system in stainless steel housing, horizontal construction, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, data interface = CAN-Bus/DS301, Profibus DP, DeviceNet. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 37_-8 Positioning system in stainless steel housing, longitudinal construction, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, data interface = CAN-Bus/DS301, Profibus DP, Device Net. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 37_/39_-14 Positioning system in stainless steel housing, longitudinal construction, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, data interface = CAN-Bus/DS301, Profibus DP, DeviceNet. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 37_/39_-8/-14 RD Positioning system in a round, stainless steel housing, V4A design, nominal power output up to 35W, IP 68 protection class, with controller, gear, DC motor （brushless） and absolute position measuring technique. Output shaft with a 10 mm external square shaft or a hollow shaft with adjustable collar; no reference run required; integrated position control; data interface: CAN-Bus/DS301, Profibus DP, DeviceNet. Description \| Manual \| Datasheet \| STP file \|
	PSE 359_14 Positioning system with controller, gear with a electronically commutated DC motor （brushless） and absolute measuring system. Machines and stops are reset automatically within minutes, which eliminates rejects due to operator error and significantly reduces downtimes. Iinterface CANopen/DS 301, Profibus, DeviceNet Description \| Manual \| Datasheet \| STP file \|
	PSE 34_-14 Positioning system with controller, gear, DC motor （brushless） and absolute measuring system. Simple hollow shaft mounting, manually operated possible, no reference runs required, integrated position control, resistant to obstructions, hand brake for raising the holding torque, joy key operation, data interface = CAN-Bus/DS301, Profibus DP, Device Net. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 31_-VG-14 Positioning system with a flange-mounted reduction gear, controller, gear, brushless DC motor and absolute measuring system for higher torque requirements. Machines and stops are refit automatically, which eliminates rejects due to operator error and significantly reduces downtimes. Data interface: CAN-Bus/DS 301, Profibus, DeviceNet. Description \| Manual \| Datasheet \| STP file \|
	PSE 42_ Positioning system with control unit, stepping motor, gear and absolute measurement system. Automatic re-fitting within minutes, no wastage as a result of operating errors, considerable reduction of downtimes. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 43_ Positioning system with control unit, motor, gear and absolute measurement system. Automatic re-fitting within minutes, no wastage as a result of operating errors, considerable reduction of downtimes. Description \| Manual \| Datasheet \| STP file \| Software \|
	PSE 200 Actuator and position control loop for the positioning of rotating machine parts. Description \| Manual \| Datasheet \| STP file \|
	PSE 272 Positioning system. Complete unit consisting of actuator and position control loop. Simple set-point value, can be connected directly to SPC. Control range up to 20 revolutions. Protection class IP 65. Description \| Manual \| Datasheet \| STP file \|
	PSE 100 Positioning system with torque of up to 10 Nm, consisting of actuator and position control loop for the positioning of rotating machine parts. Description \| Manual \| Datasheet \| STP file \|
	PSE 172 Positioning system. Complete unit consisting of actuator and position control loop. Simple set-point value, can be connected directly to SPC. Control range up to 20 revolutions. Protection class IP 65.

	PUC 24 Process monitoring device for clean rooms. Room pressure measurement with inputs for humidity and temperature sensors. Measured values are sent to the control module via a Profibus interface. Description \| Manual \| Datasheet \| Software \|
	PUC 28 Process monitoring device for measuring room pressure in clean rooms. The device is equipped with a smooth plastic exterior and additional input ports for connecting external temperature and humidity sensors. The device communicates with a master control via profibus （optional）. Description \|
	P 29 Differential pressure transmitter with TÜV certification for use with combustible gases, freely scaleable with a measuring range of 250 Pa to 100 kPa, high repeatability and precision due to automatic zero balance; available with calibration protocol or DKD certificate. Description \| Manual \| Datasheet \| Software \|
	P 26 Differential pressure transducer; freely scalable within a range of ± 10 Pa to ±100 kPa; automatic zero-point calibration provides excellent reproducibility and precision; optional RS 232 C interface; configurator available as an accessory. Description \| Manual \| Datasheet \| STP file \| Software \|
	P82 R Measuring transducer with square root-extracted output characteristic, which is thus suitable for the direct measurement of the volumetric flow rate via measuring orifice, concentric nozzle, flow grid, etc. Description \| Manual \| Datasheet \|
	PUE 94 Measuring transducer with high overload capacity for measurements that could be impaired by pressure fluctuations. Description \|
	PU/PI Measuring transducer with high precision and long-term stability for measuring the pressure in air-conditioning and ventilation units, for monitoring filling levels and for filter control, etc. Description \| Manual \| Datasheet \|
	PIZ Measuring transducer with two-conductor system 10 - 32 V, with high precision and long-term stability for measuring the pressure in air-conditioning and ventilation units, for monitoring filling levels and for filter control. Description \| Manual \| Datasheet \|
	PS 10 Measuring transducer preferably used as built-in device in air-conditioning and ventilation technology. Description \| Manual \| Datasheet \|
	PK 15 Measuring transducer with analog output for applications requiring an optional or acoustic signal as warning message. Description \| Manual \| Datasheet \|
	PS 27 Differential pressure transducer for simple air-conditioning and ventilation applications, highly sensitivity, excellent long-term stability, suitable for mounting on top-hat rails. Description \| Manual \| Datasheet \| STP file \|
	REG 21 Pressure controller, design in panel housing with large, bright LE-Display, with 2 adjustable relay outputs, which allows to realize a 2 or 3 step controller. In addition to the relay output there is an analogue output.

halstrup-walcher GmbH

Positioning systems

Actuators

Differential pressure transducer

相关技术文章 >

该厂商其他产品 >

提示

对比栏

halstrup-walcher GmbH

Positioning systems

Actuators

Differential pressure transducer

相关 技术 文章 >

该厂商其他 产品 >

提示

客户评价列表

对比栏

相关技术文章 >

该厂商其他产品 >