智能制造网APP
智能制造网手机站
智能制造网小程序
智能制造网官微
智能制造网服务号
产品 规格：【德国原装，全新*】
产品 质量：【*，假一罚十】
产品 价格：【薄利多销，行业zui低】
产品 货期：【库存销售，现买现卖】
：*
；
：
广州鸿懿电气设备有限公司竭诚为您服务
更多产品和报价咨询扫二维码加我
购物需知
1、西门子产品均为密封包装，外包装详见产品图片，白色标签上均有西门子品牌LOGO及产品订货号，各位买家在收到货后，请核对型号无误，再拆包装
2、本公司销售的产品一律为（原装**假一罚十*质保一年） 本公司签约正式的销售合同，开具17%的增值税发票、普通发票。
6SL3210-1KE21-3UB1
西门子产品订货号：6SL32101KE213UB1
西门子产品价格：168 RMB
西门子产品净重：1.100 Kg
西门子产品承诺：质保一年，原装*
西门子产品尺寸：270.00 x 225.00 x 85.00
概述
SINAMICS G120C, frame sizes FSAA to FSF, with Inligent Operator Panel IOP
SINAMICS G120C compact inverters offer a well-balanced combination of features to address a wide range of applications. They are compact, rugged devices that are easy to operate and can be optionally equipped with a basic or advanced operator panel.
SINAMICS G120C inverters are especially suitable when it comes to meeting the requirements of system integrators, OEMs and distributors regarding high productivity and tailored performance.
优势
- Compact design
- Side-by-side design
- High power density, low envelope dimensions
- Simple installation in the tightest space
- Low space requirement
- Use in small control cabinets, close to the machine
- Optimized parameter set
- Optimized commissioning
- Getting Started document
- BOP‑2 or IOP operator panels can be used
- Integrated USB connection
- Simple and fast software parameter assignment
- Simple to use during commissioning and in operation
- Minimized training costs, existing SINAMICS know-how can be used
- High degree of service friendliness, simple maintenance
- Plug-in terminals
- Cloning function using BOP‑2, IOP or memory card
- Operating hours counter for "drive on" and "motor on"
- Fast mechanical installation
- Intuitive standard commissioning
- Component of Totally Integrated Automation
- Energy-efficient, sensorless vector control
- Automatic flux reduction with V/f ECO
- Integrated energy saving computer
- Safety Integrated (STO)
- Communications versions with PROFINET / EtherNet/IP, PROFIBUS DP, USS/Modbus RTU
- Coated modules
- Operation up to an ambient temperature of 60 °C (140 °F)
设计
SINAMICS G120C is a compact converter for control cabinet mounting in IP20 degree of protection where the Control Unit (CU) and Power Module (PM) function units are combined in one device.
The compact mechanical design and the high power density allow these devices to be installed in machine control enclosures and control cabinets for maximum space utilization. The SINAMICS G120C compact converter can be butt-mounted directly, without derating at temperatures up to 40 °C (104 °F).
SINAMICS G120C, frame size FSAA with BOP-2
SINAMICS G120C can be integrated into the widest range of applications, either using the integrated digital and analog inputs or via the integrated fieldbus interface (available in USS, Modbus RTU, PROFIBUS, PROFINET / EtherNet/IP versions). Especially the product versions with integrated PROFIBUS/PROFINET interface make full integration into the Siemens TIA family possible, therefore allowing the advantages of the seamless TIA product family to be fully utilized. SINAMICS G120C devices are preset in the factory so that they can be immediay connected to PROFIBUS and/or PROFINET fieldbus systems without parameterization.
SINAMICS G120C is also equipped with the safety function STO (Safe Torque Off) as standard, which is used to safely stop drives. As a consequence, machine manufacturers can simply comply with current machinery directives with minimum associated costs.
SINAMICS G120C can control asynchronous (induction) motors in the power range from 0.37 kW up to 132 kW (0.5 hp to 200 hp). Reliable and efficient motor operation is achieved by using state-of-the-art IGBT technology combined with vector control. The extensive range of functions integrated in the SINAMICS G120C also offers a high degree of protection for the converter and motor.
Line-side components
Line reactors
Line reactors smooth the current drawn by the converter and thus reduce harmonic components in the line current. Through the reduction of the current harmonics, the thermal load on the power components in the rectifier and in the DC-link capacitors is reduced as well as the harmonic effects on the supply. The use of a line reactor increases the service life of the converter.
Recommended line-side power components
Standard fuses can be used for the SINAMICS G120C. These must be dimensioned to comply with local regulations. In this chapter, you will find recommended components such as fuses and circuit breakers in compliance with IEC and UL regulations.
DC link components
Braking resistors
Excess energy in the DC link is dissipated in the braking resistor. The braking resistors are designed for use with the SINAMICS G120C. This has an integrated braking chopper (electronic switch).
Load-side power components
Output reactors
Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.
Supplementary system components
Inligent Operator Panel IOP
Graphics-based, user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G120C.
Basic Operator Panel BOP-2
A 2-line display to provide support when commissioning and troubleshooting the drive. The drive can be locally controlled.
Memory card
The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediay ready for use again. The associated memory card holder is integrated in the inverter.
PC inverter connection kit 2
For controlling and commissioning an inverter directly from a PC if the STARTER commissioning tool or SINAMICS Startdrive has been installed on the PC.
Spare parts
Shield plates
A set of shield plates is included in the scope of delivery for the motor and signal cables corresponding to the frame size of the SINAMICS G120C, and can also be ordered as spare parts.
Spare parts kit
This kit comprises four I/O terminals, one RS485 terminal, two pairs of Control Unit doors (1 × PN and 1 × other communication versions) and one blanking cover.
Set of connectors
A set of connectors for the line feeder cable, braking resistor and motor cable can be ordered corresponding to the frame size of the SINAMICS G120C inverter.
Roof-mounted fan
A roof-mounted fan (at the top of the device) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.
Fan unit
A replacement fan (at the rear of the device; heat sink) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.
集成
Connection example for SINAMICS G120C
USS/Modbus RTU communication interface
PROFIBUS DP communication interface
PROFINET, EtherNet/IP communication interface
6SL3210-1KE21-3UB1
西门子产品订货号：6SL32101KE213UB1
西门子产品价格：168 RMB
西门子产品净重：1.100 Kg
西门子产品承诺：质保一年，原装*
西门子产品尺寸：270.00 x 225.00 x 85.00
Control Units | Power Modules degree of protection IP20 | |
|---|---|---|
| PM240‑2/PM240 | PM250 |
CU230P‑2 | ✓ | ✓ |
CU240E‑2 | ✓ | ✓ |
CU250S‑2 | ✓ | ✓ |
PM240, PM240‑2 and PM250 Power Modules
Rated power 1) |
| Rated output current Irated2) | PM240‑2 Power Modules 3) All CUs pluggable | PM250 All CUs pluggable |
|---|---|---|---|---|
kW | hp | A | Article No. | Article No. |
200 ... 240 V 1 AC/3 AC | ||||
0.55 | 0.75 | 3.2 | 6SL3210-1PB13-0❒L0 | – |
0.75 | 1 | 4.2 | 6SL321❒-1PB13-8❒L0 | – |
1.1 | 1.5 | 6 | 6SL3210-1PB15-5❒L0 | – |
1.5 | 2 | 7.4 | 6SL3210-1PB17-4❒L0 | – |
2.2 | 3 | 10.4 | 6SL321❒-1PB21-0❒L0 | – |
3 | 4 | 13.6 | 6SL3210-1PB21-4❒L0 | – |
4 | 5 | 17.5 | 6SL321❒-1PB21-8❒L0 | – |
200 ... 240 V 3 AC | ||||
5.5 | 7.5 | 22 | 6SL3210-1PC22-2❒L0 | – |
7.5 | 10 | 28 | 6SL3210-1PC22-8❒L0 | – |
11 | 15 | 42 | 6SL3210-1PC24-2UL0 | – |
15 | 20 | 54 | 6SL3210-1PC25-4UL0 | – |
18.5 | 25 | 68 | 6SL3210-1PC26-8UL0 | – |
22 | 30 | 80 | 6SL3210-1*-0UL0 | – |
30 | 40 | 104 | 6SL3210-1PC31-1UL0 | – |
37 | 50 | 130 | 6SL3210-1PC31-3UL0 | – |
45 | 60 | 154 | 6SL3210-1PC31-6UL0 | – |
55 | 75 | 178 | 6SL3210-1PC31-8UL0 | – |
380 ... 480 V 3 AC | ||||
0.37 4) | 0.5 | 1.3 | – 4) | – |
0.55 | 0.75 | 1.7 | 6SL3210-1PE11-8❒L1 | – |
0.75 | 1 | 2.2 | 6SL3210-1PE12-3❒L1 | – |
1.1 | 1.5 | 3.1 | 6SL3210-1PE13-2❒L1 | – |
1.5 | 2 | 4.1 | 6SL3210-1PE14-3❒L1 | – |
2.2 | 3 | 5.9 | 6SL3210-1PE16-1❒L1 | – |
3 | 4 | 7.7 | 6SL321❒-1PE18-0❒L1 | – |
4 | 5 | 10.2 | 6SL3210-1PE21-1❒L0 | – |
5.5 | 7.5 | 13.2 | 6SL3210-1PE21-4❒L0 | – |
7.5 | 10 | 18 | 6SL321❒-1PE21-8❒L0 | 6SL3225-0BE25-5AA1 |
11 | 15 | 26/25 | 6SL3210-1PE22-7❒L0 | 6SL3225-0BE27-5AA1 |
15 | 20 | 32 | 6SL321❒-1PE23-3❒L0 | 6SL3225-0BE31-1AA1 |
18.5 | 25 | 38 | 6SL3210-1PE23-8❒L0 | 6SL3225-0BE31-5❒A0 |
22 | 30 | 45 | 6SL3210-1PE24-5❒L0 | 6SL3225-0BE31-8❒A0 |
30 | 40 | 60 | 6SL3210-1PE26-0❒L0 | 6SL3225-0BE32-2❒A0 |
37 | 50 | 75 | 6SL3210-1PE27-5❒L0 | 6SL3225-0BE33-0❒A0 |
45 | 60 | 90 | 6SL3210-1PE28-8❒L0 | 6SL3225-0BE33-7❒A0 |
55 | 75 | 110 | 6SL3210-1PE31-1❒L0 | 6SL3225-0BE34-5❒A0 |
75 | 100 | 145 | 6SL3210-1PE31-5❒L0 | 6SL3225-0BE35-5❒A0 |
90 | 125 | 178 | 6SL3210-1PE31-8❒L0 | 6SL3225-0BE37-5❒A0 |
110 | 150 | 205 | 6SL3210-1PE32-1❒L0 | – |
132 | 200 | 250 | 6SL3210-1PE32-5❒L0 | – |
160 3) | 250 | 302 | 6SL3224-0XE41-3UA0 | – |
200 3) | 300 | 370 | 6SL3224-0XE41-6UA0 | – |
250 3) | 400 | 477 | 6SL3224-0XE42-0UA0 | – |
500 ... 690 V 3 AC | ||||
11 | 10 | 14 | 6SL3210-1PH21-4❒L0 | – |
15 | 15 | 19 | 6SL3210-1PH22-0❒L0 | – |
18.5 | 20 | 23 | 6SL3210-1PH22-3❒L0 | – |
22 | 25 | 27 | 6SL3210-1PH22-7❒L0 | – |
30 | 30 | 35 | 6SL3210-1PH23-5❒L0 | – |
37 | 40 | 42 | 6SL3210-1PH24-2❒L0 | – |
45 | 50 | 52 | 6SL3210-1PH25-2❒L0 | – |
55 | 60 | 62 | 6SL3210-1PH26-2❒L0 | – |
75 | 75 | 80 | 6SL3210-1PH28-0❒L0 | – |
90 | 100 | 100 | 6SL3210-1PH31-0❒L0 | – |
110 | 100 | 115 | 6SL3210-1PH31-2❒L0 | – |
132 | 125 | 142 | 6SL3210-1PH31-4❒L0 | – |
Heat sink variant |
|
| ↑ |
|
Standard |
|
| 0 |
|
Push Through |
|
| 1 |
|
Integrated line filter |
|
| ↑ | ↑ |
Without | (for IT systems) |
| U | U |
Class A | (for TN systems) |
| A | A |
Class B | (for TN systems) |
| – | Integrated line filter not available, as external option only |
西门子产品订货号：6SL32101KE213UB1
西门子产品价格：168 RMB
西门子产品净重：1.100 Kg
西门子产品承诺：质保一年，原装*
西门子产品尺寸：270.00 x 225.00 x 85.00
SIMATIC自动化控制系统的组成
SIMATIC是“Siemens Automatic”（西门子自动化）的缩写，SIMATIC自动化系统由一系列部件组合而成，PLC是其中的核心设备。
1．SIMATIC PLC
(1) S7系列
S7系列是传统意义的PLC产品，其中的S7 -200是针对低性能要求的紧凑的微型PLC，其编程软件为STEP 7- Micro/WIN。S7-1200是西门子新一代的小型PLC，其编程软件为STEP 7 Basic。S7 - 300是针对中等性能要求的模块式中小型PLC，zui多可以扩展32个模块。S7 - 400是用于高性能要求的模块式大型PLC，可以扩展300多个模块。S7 - 200/1200/300/400可以接入多种通信网络。
(2) M7系列
SIMATIC M7 -300/400 PLC采用与S7 - 300/400相同的结构，具有AT兼容计算机的功能，可以用C、C++或CFC（连续功能图）这些高级语言来对M7编程。M7适合于需要处理的数据量大，对数据管理、显示和实时性有较高要求的系统使用。
(3) C7系列
SIMATIC C7由紧凑型CPU S7 - 31xC、OP（操作员面板）、I/O、通信和过程监控系统组成，结构紧凑，面向用户的组态/编程、数据管理与通信集成在一起，具有很高的性能价格比。由于高度集成，节约了大约30%的安装空间。
C7用WinCC flexible组态过程显示、信息文本和配方等操作员面板的功能。
(4) WinAC
WinAC在PC（个人计算机）上实现了PLC的功能，突破了传统PLC开放性差、硬件昂贵、开发周期长、升级困难等束缚，可以实现控制、数据处理、通信、人机界面等功能。WinAC有基本型（软件PLC）、实时型和插槽型。WinAC具有良好的开放性和灵活性，可以方便地集成第三方的软件和硬件，例如运动控制卡、快速I/O卡或控制算法等。
2．SIMATIC DP分布式I/O
DP是现场总线PROFIBUS - DP的简称，ET 200分布式I/O可以安装在远离PLC的地方，通过PROFIBUS - DP总线系统实现PLC与分布式I/O之间的通信。分布式I/O可以减少大量的I/O接线。集成了DP接口的CPU或CP（通信处理器）可以作DP网络中的主站。
3．PROFINET I/O系统中的分布式I/O
PROFINET I/O系统由I/O控制器和I/O设备组成，它们通过工业以太网互联。集成有PROFINET接口的CPU(例如CPU 317 - 2PN/DP)和通信处理器（例如CP 343 -1）可以作PROFINET I/O控制器，I/O控制器与它的I/O设备之间进行循环数据交换。IE/PB链接器用于将工业以太网和PROFIBUS子网连接在一起。I/O控制器可以通过链接器来访问DP从站。
4．SIMATIC HMI
HMI是人机界面(Human - Machine Interface)的缩写，用于实现操作和监控、显示事件信息和故障信息、配方、数据记录等功能。
SIMATIC HMI的品种非常丰富，下面是各类HMI产品的主要特点：
1)按钮面板的可靠性高，适用于恶劣的工作环境。
2)微型面板主要针对S7 - 200 PLC设计，操作简单、品种丰富。
3)移动面板可以在不同的地点灵活应用。
4)触摸屏和操作员面板是人机界面的主导产品，坚固可靠、结构紧凑、品种丰富。
5)多功能面板属于产品，开放性和可扩展性zui强。
6)精简系列面板（又称为基本面板）的价格便宜，具有较高的性能价格比。
7)精彩系列面板提供人机界面的标准功能，经济实用，性价比高。采用高分辨率的16：9液晶宽屏显示。
SIMATIC HMI的组态和使用方法请参阅参考文献[3]。
5．SIMATIC NET
SIMATIC NET将控制系统中所有的站点连接在一起，可以确保站点之间的可靠通信。符合通信标准的非SIMATIC设备也可以集成到SIMATIC NET。
6．标准工具STEP 7
SIMATIC标准工具STEP 7用于对所有的SIMATIC部件（包括PLC、远程I/O、HMI、驱动装置和通信网络等）进行硬件组态和通信连接组态、参数设置和编程。STEP 7还有测试、启动、维护、文件建档、运行和诊断等功能。STEP 7中的SIMATIC Manager（管理器）用于管理自动化数据和软件工具。它将自动化项目中的所有数据都保存在一个项目文件夹中。
