智能制造网>产品库>电气设备/工业电器>电源>模块电源>>倍加福现货接近开关传感器模块连接电缆全网

倍加福现货接近开关传感器模块连接电缆全网

参考价	面议

参考价

面议

具体成交价以合同协议为准

公司名称上海桂伦自动化设备有限公司
品牌倍加福/P+F
型号VBA-4E3A-K
所在地上海
厂商性质经销商
更新时间2017/7/24 17:07:19
访问次数521

产品标签:

P+F接近开关 P+F传感器 P+F现货 P+F连接电缆

在线询价收藏产品进入展商展台

联系我们时请说明是智能制造网上看到的信息，谢谢!

索取相关资料

公司介绍主营产品

上海桂伦自动化设备有限公司专业从事工业自动化工程项目设计、安装、调试等服务和代理销售各类进口电气及自动化产品的民营企业，相当规模的电气产品分销商及工业自动化系统集成商。成立于2006年，总部坐落于上海宝山区沪太路5355弄6栋10号910/915室，拥有独立仓库，超大的物流中心。立足上海，业务*。
从事世界传感器，安全栅、隔离栅，可编程控制器，变频器，低压电器以及气动液压,仪器仪表,机电产品销售与工程配套服务；过程自动化、工厂电气自动化集成，工业自动化领域内产品销售与承接自动化工程的*。服务于石油，化工行业、水利行业、冶金行业、设备制造、烟草机械、包装机械、机床制造、汽车、船舶、纺织等众多行业。

展开显示更多内容

工控备件仪器仪表电磁阀

产品简介在线询价

倍加福现货接近开关传感器模块连接电缆全网
德国P+F编码器，传感器接近开关现货*-*桂伦！
上海桂伦工作
倍加福传感器代理现货

倍加福现货接近开关传感器模块连接电缆全网产品信息

倍加福现货接近开关传感器模块连接电缆全网

产品阐述
KE switch cabinet module 4 inputs and 3 outputs

General specifications
Slave type		A/B slave
AS-Interface specification		V3.0
Required master specification		≥ V2.1
UL File Number		E223772
Indicators/operating means
LED FAULT		Error display; red LED red: communication error, i.e. address is 0 red flashing: overload internal input supply, i.e. overload or lead interruption outputs
LED INT		Internal input supply active; LED green
LED PWR		AS-Interface voltage; green LED green: voltage OK flashing green: address 0
LED AUX		ext. auxiliary voltage U_AUX; dual LED green/red green: voltage OK red: reverse voltage
LED IN		switching state (input); 4 LED yellow
LED OUT		Switching state (output); 3 LED yellow/red yellow: Output active red: Output overload or lead breakage
Electrical specifications
Auxiliary voltage (input)		12 ... 30 V DC PELV
Auxiliary voltage (output)		20 ... 30 V DC PELV
Rated operating voltage		26.5 ... 31.6 V from AS-Interface
Rated operating current		≤ 35 mA (without sensors) / max. 190 mA
Protection class		III
Surge protection		U_EXT, U_AUX, U_e: Over voltage category III, safe isolated power supplies (PELV)
Input
Number/Type		4 inputs for 2- or 3-wire sensors (PNP), DC
Supply		from AS-Interface (switch position INT, default settings) or external U_EXT (switch position EXT)
Voltage		21 ... 31 V DC (INT)
Current loading capacity		≤ 150 mA, overload- and short-circuit protected (INT)
Input current		≤ 9 mA (limited internally)
Switching point		according to DIN EN 61131-2 (Type 2)
	0 (unattenuated)	≤ 3 mA
	1 (attenuated)	≥ 5 mA
Signal delay		< 1 ms (input/AS-Interface)
Output
Number/Type		3 electronic outputs, PNP, overload and short-circuit proof
Supply		from external auxiliary voltage U_AUX
Current		O1 max. 3 A, O2/O3 max. 1.5 A, total 6 A (T_B ≤ 40 °C) O1 max. 2 A, O2/O3 max. 1 A, total 4 A (T_B ≤ 60 °C)
Voltage		≥ (U_AUX - 0.5 V)
Usage category		DC-13
Compliance with standards and directives
Directive conformity
	EMC Directive 2004/108/EC	EN 61000-6-2:2005, EN 61000-6-4:2007, EN 50295:1999
Standard conformity
	Noise immunity	EN 61000-6-2:2005, EN 61326-1:2006, EN 50295:1999
	Emitted interference	EN 61000-6-4:2007
	Input	EN 61131-2:2004
	Degree of protection	EN 60529:2000
	Fieldbus standard	EN 50295:1999, IEC 62026-2:2006
Programming instructions
Profile		S-7.A.0
IO code		7
ID code		A
ID1 code		7
ID2 code		0
Data bits (function via AS-Interface)		input output
	D0	IN1 O1
	D1	IN2 O2
	D2	IN3 O3
	D3	IN4 -
Parameter bits (programmable via AS-i)		function
	P0	Communication monitoring P0 = 0 monitoring = off, the outputs maintain the status if communication fails P0 = 1 monitoring = on, i.e. if communication fails, the outputs are deenergised (default settings)
	P1	Input filter P1 = 0 input filter on, pulse suppression ≤ 2 ms P1 = 1 input filter off (default settings)
	P2	Lead breakage outputs P2 = 0 lead breakage on P2 = 1 lead breakage off (default settings)
	P3	not used
Ambient conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Relative humidity		85 % , noncondensing
Climatic conditions		For indoor use only
Altitude		≤ 2000 m above MSL
Pollution degree		2
Mechanical specifications
Degree of protection		IP20
Connection		removable terminals rated connection capacity: rigid/flexible (with and without wire-end ferrules): 0.25 mm² ... 2.5 mm² for multiple-wire connection with two wires of equal cross-section: flexible with twin wire-end ferrules: 0.5 mm² ... 1.5 mm²
Material
	Housing	PA 66-FR
Mass		150 g
Mounting		DIN mounting rail
Tightening torque of clamping screws		0.5 Nm ... 0.6 Nm