原进口宝德 宝帝 电磁阀burkert0407是一种带有伺服活塞和强制提升装置的先导式电磁阀,适合温度不超过 +180 °C 的介质。阀门在 0 bar 时即可打开,无需差压作用,在无流量时,阀门会在自身介质压力及弹簧力的作用下关闭。2/2-way电磁阀中立媒体+ 180°C,G 1 / 2 - G 2,fl0407型是飞行员控制的螺线管带有伺服活塞和强制阀提升的阀门,并且适用于媒体温度的上升+ 180°C。这个阀门开时没有差速器压强来自于零大气压,并被它关闭拥有自己的媒体压力和弹簧力电源。
原进口宝德 宝帝 电磁阀burkert0407Technical data
Orifi ce DN 13-50 mm body material brass (gray cast iron parts required) coil material coil insulation class H ptfe epoxy resin/graphite sealing material media neutral media, such as hot water and steam temperature of the media - 20 + 180 ° C temperature maximum. + 55 ° C Max viscosity. 21 square mm/SEC voltage tolerance + / - 10% * duty cycle for electrical connection in the cable plug Ø 7 mm cable, acc. To DIN EN 175301-803 A (provided by standard) the IP 65 with the protection grade is equipped with cable plugs required to be installed, preferably perpendicular to the actuator
技术数据
Orifi ce DN 13 - 50mm阀体材质黄铜(灰铸铁件要求)线圈材料环氧树脂线圈绝缘等级H聚四氟乙烯/石墨密封材料媒体中性媒体,如热水和蒸汽媒体温度-20 + 180°C环境温度zui大值。+ 55°C粘度马克斯。21平方毫米/秒电压公差±10%工作周期*持续电气连接电缆插头Ø7毫米电缆,acc。到DIN EN 175301-803 A(按标准提供)保护等级的IP 65装有电缆插头按要求安装,与执行机构垂直