Features

• 1.8" housing
• 7+15 pin SATA
• Low power consumption

Overview

The FiD 1.8"SATA D150 is an entry-level SLC SSD that supports most standard SATA port platforms. This economic SSD can save up to half the space inside a motherboard. The FiD 1.8" SATA D150 operates under SATA II (3.0Gb/s) protocol, delivering good performance and sustained read and write speeds of up to 130MB and 120MB per second respectively.

Benefits

The Innodisk FiD 1.8"SATA D150 SSD provides manufacturers with an effective replacement for hard disk drives (HDDs).

• Good performance, small seek time, and no latency time
• Reduces boot time of the operation system
• Consumes less power than an HDD
• Able to work in lower or higher temperatures than an HDD

Specifications

Availability

Model Name                                  FiD 1.8"SATA D150 SSD

Interface                                     SATA II 3.0Gb/s

Type                                         1.8"

Flash Type                                    SLC

Capacity                                      2GB~64GB

Max. Channels                                 4

Sequential R/W (MB/sec, max.)                  130/120

Max. Power Consumption                       1W (5V X200 mA)

Thermal Sensor                                Optional

External DRAM Buffer                           N

ATA Security                                   Y

Conformal Coating                              N

S.M.A.R.T.                                     Y

Dimension (LxH/mm)                         69.8X 50.0 X 9.3

Vibration                                       20G@7~2000Hz

Shock                                         1500G@0.5ms

MTBF                                         >3 million hours

Storage Temperature                           -55°C ~ +95°C

Operation Temperature                         Standard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C