智能制造网
详细介绍
产品 规格：【德国原装，全新*】
产品 质量：【*，假一罚十】
产品 价格：【薄利多销，行业zui低】
产品 货期：【库存销售，现买现卖】
：*
；
：
广州鸿懿电气设备有限公司竭诚为您服务
更多产品和报价咨询扫二维码加我
购物需知
1、西门子产品均为密封包装，外包装详见产品图片，白色标签上均有西门子品牌LOGO及产品订货号，各位买家在收到货后，请核对型号无误，再拆包装
2、本公司销售的产品一律为（原装**假一罚十*质保一年） 本公司签约正式的销售合同，开具17%的增值税发票、普通发票。
6SL3210-1KE22-6UB1
西门子产品订货号：6SL32101KE226UB1
西门子产品价格：168 RMB
西门子产品净重：1.100 Kg
西门子产品承诺：质保一年，原装*
西门子产品尺寸：270.00 x 225.00 x 85.00
概述
SINAMICS G120C, frame sizes FSAA to FSF, with Inligent Operator Panel IOP
SINAMICS G120C compact inverters offer a well-balanced combination of features to address a wide range of applications. They are compact, rugged devices that are easy to operate and can be optionally equipped with a basic or advanced operator panel.
SINAMICS G120C inverters are especially suitable when it comes to meeting the requirements of system integrators, OEMs and distributors regarding high productivity and tailored performance.
优势
- Compact design
- Side-by-side design
- High power density, low envelope dimensions
- Simple installation in the tightest space
- Low space requirement
- Use in small control cabinets, close to the machine
- Optimized parameter set
- Optimized commissioning
- Getting Started document
- BOP‑2 or IOP operator panels can be used
- Integrated USB connection
- Simple and fast software parameter assignment
- Simple to use during commissioning and in operation
- Minimized training costs, existing SINAMICS know-how can be used
- High degree of service friendliness, simple maintenance
- Plug-in terminals
- Cloning function using BOP‑2, IOP or memory card
- Operating hours counter for "drive on" and "motor on"
- Fast mechanical installation
- Intuitive standard commissioning
- Component of Totally Integrated Automation
- Energy-efficient, sensorless vector control
- Automatic flux reduction with V/f ECO
- Integrated energy saving computer
- Safety Integrated (STO)
- Communications versions with PROFINET / EtherNet/IP, PROFIBUS DP, USS/Modbus RTU
- Coated modules
- Operation up to an ambient temperature of 60 °C (140 °F)
设计
SINAMICS G120C is a compact converter for control cabinet mounting in IP20 degree of protection where the Control Unit (CU) and Power Module (PM) function units are combined in one device.
The compact mechanical design and the high power density allow these devices to be installed in machine control enclosures and control cabinets for maximum space utilization. The SINAMICS G120C compact converter can be butt-mounted directly, without derating at temperatures up to 40 °C (104 °F).
SINAMICS G120C, frame size FSAA with BOP-2
SINAMICS G120C can be integrated into the widest range of applications, either using the integrated digital and analog inputs or via the integrated fieldbus interface (available in USS, Modbus RTU, PROFIBUS, PROFINET / EtherNet/IP versions). Especially the product versions with integrated PROFIBUS/PROFINET interface make full integration into the Siemens TIA family possible, therefore allowing the advantages of the seamless TIA product family to be fully utilized. SINAMICS G120C devices are preset in the factory so that they can be immediay connected to PROFIBUS and/or PROFINET fieldbus systems without parameterization.
SINAMICS G120C is also equipped with the safety function STO (Safe Torque Off) as standard, which is used to safely stop drives. As a consequence, machine manufacturers can simply comply with current machinery directives with minimum associated costs.
SINAMICS G120C can control asynchronous (induction) motors in the power range from 0.37 kW up to 132 kW (0.5 hp to 200 hp). Reliable and efficient motor operation is achieved by using state-of-the-art IGBT technology combined with vector control. The extensive range of functions integrated in the SINAMICS G120C also offers a high degree of protection for the converter and motor.
Line-side components
Line reactors
Line reactors smooth the current drawn by the converter and thus reduce harmonic components in the line current. Through the reduction of the current harmonics, the thermal load on the power components in the rectifier and in the DC-link capacitors is reduced as well as the harmonic effects on the supply. The use of a line reactor increases the service life of the converter.
Recommended line-side power components
Standard fuses can be used for the SINAMICS G120C. These must be dimensioned to comply with local regulations. In this chapter, you will find recommended components such as fuses and circuit breakers in compliance with IEC and UL regulations.
DC link components
Braking resistors
Excess energy in the DC link is dissipated in the braking resistor. The braking resistors are designed for use with the SINAMICS G120C. This has an integrated braking chopper (electronic switch).
Load-side power components
Output reactors
Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.
Supplementary system components
Inligent Operator Panel IOP
Graphics-based, user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G120C.
Basic Operator Panel BOP-2
A 2-line display to provide support when commissioning and troubleshooting the drive. The drive can be locally controlled.
Memory card
The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediay ready for use again. The associated memory card holder is integrated in the inverter.
PC inverter connection kit 2
For controlling and commissioning an inverter directly from a PC if the STARTER commissioning tool or SINAMICS Startdrive has been installed on the PC.
Spare parts
Shield plates
A set of shield plates is included in the scope of delivery for the motor and signal cables corresponding to the frame size of the SINAMICS G120C, and can also be ordered as spare parts.
Spare parts kit
This kit comprises four I/O terminals, one RS485 terminal, two pairs of Control Unit doors (1 × PN and 1 × other communication versions) and one blanking cover.
Set of connectors
A set of connectors for the line feeder cable, braking resistor and motor cable can be ordered corresponding to the frame size of the SINAMICS G120C inverter.
Roof-mounted fan
A roof-mounted fan (at the top of the device) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.
Fan unit
A replacement fan (at the rear of the device; heat sink) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.
集成
Connection example for SINAMICS G120C
USS/Modbus RTU communication interface
PROFIBUS DP communication interface
PROFINET, EtherNet/IP communication interface
6SL3210-1KE22-6UB1
西门子产品订货号：6SL32101KE226UB1
西门子产品价格：168 RMB
西门子产品净重：1.100 Kg
西门子产品承诺：质保一年，原装*
西门子产品尺寸：270.00 x 225.00 x 85.00
Control Units | Power Modules degree of protection IP20 | |
|---|---|---|
| PM240‑2/PM240 | PM250 |
CU230P‑2 | ✓ | ✓ |
CU240E‑2 | ✓ | ✓ |
CU250S‑2 | ✓ | ✓ |
PM240, PM240‑2 and PM250 Power Modules
Rated power 1) |
| Rated output current Irated2) | PM240‑2 Power Modules 3) All CUs pluggable | PM250 All CUs pluggable |
|---|---|---|---|---|
kW | hp | A | Article No. | Article No. |
200 ... 240 V 1 AC/3 AC | ||||
0.55 | 0.75 | 3.2 | 6SL3210-1PB13-0❒L0 | – |
0.75 | 1 | 4.2 | 6SL321❒-1PB13-8❒L0 | – |
1.1 | 1.5 | 6 | 6SL3210-1PB15-5❒L0 | – |
1.5 | 2 | 7.4 | 6SL3210-1PB17-4❒L0 | – |
2.2 | 3 | 10.4 | 6SL321❒-1PB21-0❒L0 | – |
3 | 4 | 13.6 | 6SL3210-1PB21-4❒L0 | – |
4 | 5 | 17.5 | 6SL321❒-1PB21-8❒L0 | – |
200 ... 240 V 3 AC | ||||
5.5 | 7.5 | 22 | 6SL3210-1PC22-2❒L0 | – |
7.5 | 10 | 28 | 6SL3210-1PC22-8❒L0 | – |
11 | 15 | 42 | 6SL3210-1PC24-2UL0 | – |
15 | 20 | 54 | 6SL3210-1PC25-4UL0 | – |
18.5 | 25 | 68 | 6SL3210-1PC26-8UL0 | – |
22 | 30 | 80 | 6SL3210-1*-0UL0 | – |
30 | 40 | 104 | 6SL3210-1PC31-1UL0 | – |
37 | 50 | 130 | 6SL3210-1PC31-3UL0 | – |
45 | 60 | 154 | 6SL3210-1PC31-6UL0 | – |
55 | 75 | 178 | 6SL3210-1PC31-8UL0 | – |
380 ... 480 V 3 AC | ||||
0.37 4) | 0.5 | 1.3 | – 4) | – |
0.55 | 0.75 | 1.7 | 6SL3210-1PE11-8❒L1 | – |
0.75 | 1 | 2.2 | 6SL3210-1PE12-3❒L1 | – |
1.1 | 1.5 | 3.1 | 6SL3210-1PE13-2❒L1 | – |
1.5 | 2 | 4.1 | 6SL3210-1PE14-3❒L1 | – |
2.2 | 3 | 5.9 | 6SL3210-1PE16-1❒L1 | – |
3 | 4 | 7.7 | 6SL321❒-1PE18-0❒L1 | – |
4 | 5 | 10.2 | 6SL3210-1PE21-1❒L0 | – |
5.5 | 7.5 | 13.2 | 6SL3210-1PE21-4❒L0 | – |
7.5 | 10 | 18 | 6SL321❒-1PE21-8❒L0 | 6SL3225-0BE25-5AA1 |
11 | 15 | 26/25 | 6SL3210-1PE22-7❒L0 | 6SL3225-0BE27-5AA1 |
15 | 20 | 32 | 6SL321❒-1PE23-3❒L0 | 6SL3225-0BE31-1AA1 |
18.5 | 25 | 38 | 6SL3210-1PE23-8❒L0 | 6SL3225-0BE31-5❒A0 |
22 | 30 | 45 | 6SL3210-1PE24-5❒L0 | 6SL3225-0BE31-8❒A0 |
30 | 40 | 60 | 6SL3210-1PE26-0❒L0 | 6SL3225-0BE32-2❒A0 |
37 | 50 | 75 | 6SL3210-1PE27-5❒L0 | 6SL3225-0BE33-0❒A0 |
45 | 60 | 90 | 6SL3210-1PE28-8❒L0 | 6SL3225-0BE33-7❒A0 |
55 | 75 | 110 | 6SL3210-1PE31-1❒L0 | 6SL3225-0BE34-5❒A0 |
75 | 100 | 145 | 6SL3210-1PE31-5❒L0 | 6SL3225-0BE35-5❒A0 |
90 | 125 | 178 | 6SL3210-1PE31-8❒L0 | 6SL3225-0BE37-5❒A0 |
110 | 150 | 205 | 6SL3210-1PE32-1❒L0 | – |
132 | 200 | 250 | 6SL3210-1PE32-5❒L0 | – |
160 3) | 250 | 302 | 6SL3224-0XE41-3UA0 | – |
200 3) | 300 | 370 | 6SL3224-0XE41-6UA0 | – |
250 3) | 400 | 477 | 6SL3224-0XE42-0UA0 | – |
500 ... 690 V 3 AC | ||||
11 | 10 | 14 | 6SL3210-1PH21-4❒L0 | – |
15 | 15 | 19 | 6SL3210-1PH22-0❒L0 | – |
18.5 | 20 | 23 | 6SL3210-1PH22-3❒L0 | – |
22 | 25 | 27 | 6SL3210-1PH22-7❒L0 | – |
30 | 30 | 35 | 6SL3210-1PH23-5❒L0 | – |
37 | 40 | 42 | 6SL3210-1PH24-2❒L0 | – |
45 | 50 | 52 | 6SL3210-1PH25-2❒L0 | – |
55 | 60 | 62 | 6SL3210-1PH26-2❒L0 | – |
75 | 75 | 80 | 6SL3210-1PH28-0❒L0 | – |
90 | 100 | 100 | 6SL3210-1PH31-0❒L0 | – |
110 | 100 | 115 | 6SL3210-1PH31-2❒L0 | – |
132 | 125 | 142 | 6SL3210-1PH31-4❒L0 | – |
Heat sink variant |
|
| ↑ |
|
Standard |
|
| 0 |
|
Push Through |
|
| 1 |
|
Integrated line filter |
|
| ↑ | ↑ |
Without | (for IT systems) |
| U | U |
Class A | (for TN systems) |
| A | A |
Class B | (for TN systems) |
| – | Integrated line filter not available, as external option only |
西门子产品订货号：6SL32101KE226UB1
西门子产品价格：168 RMB
西门子产品净重：1.100 Kg
西门子产品承诺：质保一年，原装*
西门子产品尺寸：270.00 x 225.00 x 85.00
举例说明PLC的工作原理
下面用一个简单的例子来进一步说明PLC的循环工作过程。开关K1和K2的常开触点分别接在输入模块上I0.1和I0.2对应的输入端，接触器KM的线圈接在输出模块上Q4.0对应的输出端。
图1-5的梯形图中的I0.1是过程映像输入位，与接在对应的输入端的K1的常开触点相对应，梯形图中的Q4.0是过程映像输出位，与接在对应的输出端子的输出模块内的输出电路相对应。梯形图以指令的形式储存在PLC的用户程序存储器中，图1-5中的梯形图与下面的3条指令相对应，“//”之后是该指令的注释：
A I 0.1 //接在左侧“电源线”上的I0.1的常开触点
AN I 0.2 //串联的I0.2的常闭触点
= Q 4.0 //Q4.0的线圈
A（And，与）指令表示常开触点串联，AN(And Not)指令表示常闭触点串联，赋值指令“=”表示将逻辑运算的结果传送给的地址。图1-5中的梯形图完成的逻辑运算为
在读取输入模块阶段，CPU将K1和K2的常开触点的ON/OFF状态读人对应的过程映像输入位，外部触点接通时将二进制数1存入过程映像输入位，反之存入0。
图1-5 PLC外部接线图与梯形图
执行第1条指令时，从过程映像输入位I0.1中取出二进制数并暂时保存起来。
执行第2条指令时，取出过程映像输入位I0.2中的二进制数，因为是常闭触点，首先对取出的二进制数作“非”运算，然后与I0.1对应的二进制数作“与”运算，触点的串联对应“与”运算。
执行第3条指令时，将前面的二进制数运算的结果送给过程映像输出位Q4.0。
在下一扫描周期的数据写入输出模块阶段，CPU将各过程映像输出位中的二进制数传送给输出模块，并由后者将数据锁存起来。如果过程映像输出位Q4.0中存放的是二进制数1，外接的KM的线圈将通电，反之将断电。
图1-5的波形图中的高电平表示外部开关接通或KM的线圈通电，当t<t1时，读入的过程映像输入位I0.1和I0.2的值均为二进制数0，此时过程映像输出位Q4.0中存放的亦为0，在程序执行阶段，经过上述逻辑运算过程之后，运算结果仍为Q4.0=0，所以KM的线圈处于断电状态。t=t1时开关K1的外接触点接通，I0.1变为1状态，经逻辑运算后Q4.0也变为1状态。在输出处理阶段，将Q4.0对应的过程映像输出位中的1送到输出模块，输出模块中与Q4.0对应的物理继电器的常开触点接通，接触器KM的线圈通电。
智能制造网