当前位置：上海博长电子有限公司>>BODINE减速电机控制器>>BODINE交流调速器2998

BODINE交流调速器2998

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质经销商

所在地上海市

在线询价收藏产品查看联系电话

联系方式：洪剑查看联系方式

更新时间：2024-07-31 11:18:29浏览次数：96次

联系我时，请告知来自智能制造网

产品分类 品牌分类

暂无信息

上海博长电子有限公司

经营模式：经销商

商铺产品：89条

所在地区：上海上海市

联系人：洪剑（销售经理）

询价 给他留言

产品简介

SPECIFICATIONSMotorHPUpTo1PhasesInput:Single-phase115Or208/230VAC,50/60Hz

详细介绍

SPECIFICATIONS

Motor HP	Up To 1
Phases	Input: Single-phase 115 Or 208/230 VAC, 50/60Hz. Output: 3-phase, 230 VAC (50Hz Or 60Hz, Selectable)
Output Volts	0 To 230
Output Amps	3.6 Max
Output Hz	0 To 120
Input Volts	115 Or 208/230
Input Hz	50/60
Dimensions (inches; W X H X D)	5 X 7 X 4.2
Weight (lbs)	2.5
HPDecimal	1.0

STANDARD FEATURES

Simple to operate. Does not require programming. Uses trimpots and jumpers, which are factory set for most applications.
Motor horsepower selection jumper allows the drive to be used on a wide range of motor HP.
Diagnostic LEDs. PC board mounted LEDs for power on, drive status, and overload.
Run/Fault relay output contacts turn equipment on/off and signal stop mode if a fault has occurred.
Barrier terminal blocks facilitate wiring.
Jumper selection of drive output frequency increases the motor speed up to two times the rated RPM.
Motor overload (I2t) with RMS current limit prevents motor burnout and nuisance trips.
Electronic inrush current limit eliminates harmful inrush AC line current during startup.
Short Circuit. Shuts down the drive if a short circuit occurs at the motor (phase-to-phase).
Regeneration eliminates tripping due to bus overvoltage.
Overvoltage and undervoltage shuts down the drive if the AC line input voltage goes above or below the operating range.
On/Off Switch, Speed Pot, F-S-R Switch installed in front panel for easy access.
Built-in line filter for CE compliance.
cULus, RoHS, CE.
Extended 2-year system warranty when a Bodine gearmotor/motor and control are purchased together.

Application Information
Our PACESETTER™ NEMA-1 / IP-40 AC motor speed control is designed to provide variable speed control for inverter duty rated, 230VAC, three-phase AC induction motors and gearmotors. The control is rated for continuous operation in an up to +40° C ambient and designed for stand-alone operation.
This control is ideal for variable-speed applications such as conveyors, packaging equipment, door and gate openers, and other industrial or commercial equipment.