深圳市宏美瑞科技有限公司
免费会员

当前位置:深圳市宏美瑞科技有限公司>>PEAK>> IPEH-004061德国PEAK进口PCAN-USB ProFD:高速USB 2.0转CAN FD和LIN接口配件

德国PEAK进口PCAN-USB ProFD:高速USB 2.0转CAN FD和LIN接口配件

参  考  价面议
具体成交价以合同协议为准

产品型号IPEH-004061

品       牌

厂商性质代理商

所  在  地深圳市

更新时间:2022-02-18 08:07:04浏览次数:2436次

联系我时,请告知来自 智能制造网
原装*进口,IPEH-004061包邮。 德国PEAK进口PCAN-USB ProFD:高速USB 2.0转CAN FD和LIN接口

深圳市宏美瑞科技有限公司为您介绍:

全国代理,*全新*,厂家标准保修2年,报价含运费(顺丰快递)!现货!

PCAN-USB Pro FD适配器可通过USB把CAN FD和LIN网络连接到电脑。两种现场总线可同时连接,用相应的电缆 (2 x CAN FD, 2 x LIN)可连接zui多4路。每个CAN FD通道单独和USB和LIN电气隔离,达到500 V。使用简单并且它坚固的铝合金壳使该接口特别适用于随身携带外出使用。

D-Sub接口引脚图

管脚管脚定义
1没有连接 / 可选 +5V
2CAN-L
3GND
4没有连接
5没有连接
6GND
7CAN-H
8没有连接
9没有连接

 

新的CAN FD标准 (CAN with Flexible Data Rate) 主要特点是更高的数据传输带宽。zui大64数据位每个CAN FD帧 (代替目前的8位) 可以zui大12 Mbit/s比特率传输。CAN FD向下兼容CAN 2.0 A/B标准,因此CAN FD节点可用于现有的CAN网络。但是,在这种情况下,CAN FD扩展不适用。

特性

  • 适配器用于高速USB 2.0 (兼容USB 1.1 和 USB 3.0)
  • 发送和接收CAN FD 和 LIN 报文使用2个 D-Sub连接器(都有CAN FD 和 LIN 总线分配)
  • 时间戳分辨率1 μs
  • 在D-Sub连接器上的5-V供电可通过焊接跳线连接,例如外部总线转换器。
  • 通过USB供电
  • 扩展的工作温度范围从-40 to 85 °C (-40 to 185 °F)

CAN工作特性

  • 符合CAN规范 2.0 A/B 和 FD 1.0
  • CAN FD比特率用于数据域 (64位zui大) 从40 kbit/szui大至12 Mbit/s
  • CAN比特率从40 kbit/szui大至1 Mbit/s
  • CAN FD控制器的FPGA实施
  • NXP TJA1044GT CAN收发器
  • 每个CAN FD通道独立光解耦USB和LIN,zui大500 V
  • CAN端子可通过焊接跳线激活
  • 总线负载测量包括错误帧和过载帧
  • 诱发错误发生功能用于进入和外出CAN报文 

LIN工作特性

  • 比特率从1 kbit/s zui大至20 kbit/s
  • TJA1021/20 LIN收发器
  • 两个LIN通道 (共地) 光解耦 USB 和 CAN FD
  • 可被用作LIN主站或从站 (1 ms主站任务分辨率)
  • 自动比特率、帧长度、和校验和类识别
  • 自发调度器,支持无条件、事件、和零星帧
  • 硬件可工作于时间表 (zui大8个时间表可用总共256个间隙位配置)

发货清单

  • PCAN-USB Pro FD接口(铝合金外壳)
  • CAN FD接口驱动 for Windows® 8.1, 7, Vista and Linux (32/64 bit)
  • LIN接口驱动 for Windows® 8.1, 7, Vista (32/64 bit)
  • PCAN-View CAN监视器Windows软件
  • PLIN-View Pro LIN监视器Windows软件
  • PCAN-Basic 编程接口包括接口DLL、例程、和所有常用编程语言的头文件
  • PLIN-API编程接口包括接口DLL、例程、和所有常用编程语言的头文件
  • PDF格式的说明书

The PCAN-USB Pro FD adapter enables the connection of CAN FD and LIN networks to a computer via USB. Two field busses can be connected at the same time, up to four with appropriate adapter cables (2 x CAN FD, 2 x LIN). Each CAN FD channel is separay isolated against USB and LIN with a maximum of 500 Volts. Its robust aluminum casing makes the PCAN-USB Pro FD adapter suitable for applications.

The new CAN FD standard (CAN with Flexible Data rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit/s. CAN FD is downward-compatible to the CAN 2.0 A/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.

The monitor software PCAN-View and the programming interface PCAN-Basic for the development of applications with CAN connection are included in the scope of supply and support the new standard CAN FD. The monitor application PLIN-View Pro as well as the PLIN programming interface are also included in the scope of supply.

  • Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0)
  • Transmitting and receiving of CAN FD and LIN messages using 2 D-Sub connections (both with pin assignment for the CAN FD and LIN bus)
  • Time stamp resolution 1 μs
  • 5-Volt supply at the D-Sub connector can be activated through a solder jumper, e.g. for external bus converter
  • Voltage supply via USB
  • Extended operating temperature range from 
    -40 to 85 °C (-40 to 185 °F)

CAN operation properties:

  • Complies with CAN specifications 2.0 A/B and FD
  • CAN FD support for ISO and Non-ISO standards switchable
  • CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
  • CAN bit rates from 25 kbit/s up to 1 Mbit/s
  • FPGA implementation of the CAN FD controller
  • NXP TJA1044GT CAN transceiver
  • Each CAN FD channel is separay opto-decoupled against USB and LIN up to 500 V
  • CAN termination can be activated through a solder jumper, separay for each CAN channel
  • Measurement of bus load including error frames and overload frames on the physical bus
  • Induced error generation for incoming and outgoing CAN messages

LIN operation properties:

  • Bit rates from 1 kbit/s up to 20 kbit/s
  • TJA1021/20 LIN transceiver
  • Both LIN channels (common ground) are optodecoupled against USB and CAN FD
  • Can be used as a LIN master or slave (1 ms master task resolution)
  • Automatic bit rate, frame length, and checksum type recognition
  • Autonomous scheduler with support for unconditional, event, and sporadic frames
  • Hardware can work through a schedule table (up to 8 schedule tables can be configured with a total of 256 slots)

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

X
该信息已收藏!
标签:
保存成功

(空格分隔,最多3个,单个标签最多10个字符)

常用:

提示

X
您的留言已提交成功!我们将在第一时间回复您~
在线留言