宝德burkert00178363控 制 器
宝德burkert00178363控 制 器
Control unit for plug-on module | 667 839 |
RS232 module for plug-on | 667 840 |
RS485 module for plug-on | 667 841 |
RS232 module for DIN-rail | 667 842 |
RS485 module for DIN-rail | 667 843 |
Right-angle plug M12, 4 pins | 784 301 |
M12 connector with 5m cable, 4 pins | 918 038 |
M8 connector with 2m cable for RS232/ Rs485 plug-on module | 918 718 |
Cover (for control unit without display) | 670 549 |
技术数据
工作电压12 - 24 V DC
电压容差10%
残留纹波<5%
功耗约1瓦(无阀)
输出电流(阀)zui大2A
环境温度- 10到60°C
输入信号0-20 mA,4-20mA或
0-5V,0-10 V(配置可配置)
输入阻抗小于200Ω(电流输入)
> 20 KΩ(电压输入)
阀门控制PWM信号的频率可调–80hz 6 kHz的输出信号
斜坡函数时间变量从0到10 s
版本–电缆插头直接安装(PG或M12
连接)
- DIN铁路版本(DIN EN 50022)
防护等级IP65–电缆插头
DIN导轨–IP40
外壳材料电缆插头-聚酰胺/ PC
DIN导轨-聚酰胺/ PBT
Functions of the controller Type 8605
– Microprocessor-controlled electronics
– Compensation of the solenoid coil heating by internal current control
– Configurable ramp function
– Adjustable zero point shutdown
– Display and buttons
– Selectable input signal
– RS232 or RS485 interface (with auxiliary module)
– Infiniy variable PWM frequency
– Simple adaptation of the minimum and maximum current (start of opening and full opening) to the actual pressure conditions