工作电压 [V]8...32 DC
电流损耗 [mA]< 150; (包含圆盘加热)
过压保护是
接通峰值电流 [mA]700
Einschaltspitzenstrom [mA]700; (t = 2 ms
像场大小 [mm]
工作距离像场Z小的可识别的物体分辨率
成都善荣机电设备有限公司 |
8
|
参考价 | 面议 |
具体成交价以合同协议为准 |
更新时间:2023/05/27 13:34:11浏览次数:932
联系我们时请说明是智能制造网上看到的信息,谢谢!
产品描述模拟摄像机德国HYDAC贺德克
工作电压 [V] 8...32 DC
电流损耗 [mA] < 150; (包含圆盘加热)
过压保护 是
接通峰值电流 [mA] 700
Einschaltspitzenstrom [mA] 700; (t = 2 ms
像场大小 [mm]
工作距离 像场 zui小的可识别的物体 分辨率
1000 1500 x 1100
2000 3000 x 3200
5000 7500 x 5500
图像分辨率 [像素] 680 x 480
圆柱形孔径角 [°] 78
孔径角 78EMC电磁兼容
DIN EN 61000-6-4 工业环境
DIN EN 61000-6-2 工业环境
抗冲击
50 g
抗震
频率范围 24...2000 Hz
(15,3 x 9,81 m/s²)rms PSD (g²/Hz)
0,04...0,1 重量 [g] 310.6
尺寸 [mm] Ø 55.5 / L = 51.3
原材料 外壳: 铝 黑色铝阳氧化处理; 前面透镜: 浮法玻璃 化学硬化
Sensorart ¼'' 4:3 VGA CMOS图像传感器彩色
产品描述模拟摄像机德国HYDAC贺德克
附件This document applies to devices of the type "PDM360 NG" (art. no.: CR1083 and
CR1087). These instructions are an integral part of the device.
This document is intended for specialists. These specialists are people who are
qualified by their appropriate training and their experience to see risks and to
avoid possible hazards that may be caused during operation or maintenance of
the device. The document contains information about the correct handling of the
device.
Read this document before use to familiarise yourself with operating conditions,
installation and operation. Keep this document during the entire duration of use of
the device.
请输入账号
请输入密码
请输验证码