电脑型水性印刷开槽模切机

APS II电脑型水性印刷开槽模切机

APS II Computerized Flexo Printing Slotting Die Cutting Machine

送纸部：

v        采用德国进口伺服控制四轴式前缘送纸装置（可选配后踢式送纸系统）；

v        电动离合、气动联锁、移动警示、过载保护；

v        四轴式前缘送纸系统（延伸量可调整）、变频调控风量，送纸精、稳；

v        同步升降式除尘装置（可按需求调整风段），除尘更完善；

v        送纸胶辊采用快换式机构，维护方便；

v        送纸胶辊采用“双胶层”，内软、外硬，保护纸板强度。

Feeding Unit：

v        Lead feed system with four-shaft structure is controlled by servo, imported from Germany（Optional equipment— kick feeder）.

v        Machine unit open/close is motorized control with alarm, pneumatic inter lock, over load protection.

v        Lead feed system with four-shaft structure and frequency converter control suction to make feed accuray and stably.

v        Double feeding roller device can ensure the best stabilization in feeding.

v        Dusting device adopt synchronous-lifting structure（the wind section can dajust accordingly）to make dusting function be more perfect.

v        Quick change feeding roll device is convenient for maintenance.

v        Double layer rubber over the feeding roller（ its inside is soft and outside is hardness）to protect the strength of corrugated board.

印刷部：

v        印刷相位，电脑及电动数显调整；

v        导送轮快速横移机构，间隙自锁调整装置；

v        导送过桥板同步升降装置，纸板导送更平稳；

v        网纹辊/胶辊气动夹紧装置，调控快捷，拭墨效果更佳；

v        卷轴锁版，左、右两侧锁紧装置，挂板定位方便；

v        印刷自动复位系统，设控式节墨循环清洁系统。

Printing Unit：

v        Circumferential position is adjusted by both computer and motorized with digital display.

v        Quick lateral adjuster control guide wheel, Gap adjuster with self-locking function.

v        With the synchronous lifting device, the guide connectiong board transport corrugated board to even smoothly.

v        Pneumatic control to clop anilox roller and rubber roller, it can get good effect for testiong and adjusting.

v        Roll-locking device is easy to located the flexo-plates and lock it on both side.

v        Circumferential auto-reset, Controlled cycle washing system to save ink.

开槽部：

v        开槽尺寸电脑调控，自动对位、快速高效；

v        前、后刀分轴型式，尺寸调控受限小，连线模切生产更方便；

v        预压轮表面包裹优力胶，不易损坏纸板；

v        快速横移精密线性导向系统，位移快捷、精准，开槽光洁。

v        中刀位移机构，修边截切装置，生产适应性强；

v        修边刀采用单刀刃、弹合式，修边光洁、节约成本。

Slotting Unit：

v        Slotting dimension can be adjusted by both computer and motorized to raise production efficiency.

v        The front and rear slotting blade are set on two shafts, so it can get more slotting dimension range for adjusting. It also can easy to link rotary die cutter for the convenience of the production.

v        Pre-creasing tool covered with YOU LI rubber to prevents crushing board.

v        Precise linear guides system ensure slotting knife move pecisely and quickly, it can get good slotting effect.

v        Equipped with middle slotting knife lateral adjust device, trimming edge device to meet the needs of production requirement.

v        Spring sing edge blade is adopted for trimming corrugated board, it can save cost and get the good trimming effect.

模切部：

v        模切相位，电脑及电动数显调控；

v        模切压力间隙电动数显调整；

v        胶垫辊自动位移机构，延长胶垫使用寿命；

v        进口快换式胶垫、调整方便、耐磨损；

v        精密型“设控式”速差补偿系统，确保模切精度；

v        胶垫研磨修正机构，增加胶垫使用率，降低消耗。

Die Cutting Unit：

v        Circumferential positiong is adjusted by both computer and motorized with digital display.

v        Die cutting pressure gap is motorized adjusted with digital display.

v        Auto displacement control device to adjust anvil roll, it can prolong usage time of anvil roll.

v        Replaceable rubber anvil with good wear-ablity, it is easy to rplace operation.

v        Speed difference compensation system ensure die cutting precision.

v        Anvil roll repair device to convenient prolong usage time of anvil roll and reduce consumption.

技术参数specifications：