工业制氧机

1，工作原理

TAO制氧机分离空气主要由两个填满分子筛的吸附塔组成，在常温条件下，将压缩空气经过过滤，除水干燥等净化处理后进入吸附塔，在吸附塔中空气中的氮气等被分子筛所吸附，而使氧气在气相中得到富集，从出口流出贮存在氧气缓冲罐中，而在另一塔已完成吸附的分子筛被迅速降压，解析出已吸附的成分，两塔交替循环，即可得到纯度为≥90%的廉价的氧气。整个系统的阀门自动切换均由一台电脑自动控制。

PSA制氧机因为其显著的优点而被广大用户所青睐，它广泛地应用于冶金助燃，化工、环保、建材、轻工、水产养殖、生物技术、污水处理等领域。

相关搜索，工业制氧机，工业制氧设备，空分制氧机，*，中小型制氧设备，氧气发生器，制氧设备，制氧装置，工业氧发生器，制氧系统，变压吸附制氧机，3-3000立方制氧机等

2，技术指标

氧气产量：5-200Nm3/h               氧气纯度：93%--95%

氧气压力：0.2—0.3Mpa              露点：--40℃（常压下）

3，备注，

本套系统氧气出口压力一般为0.2-0.3Mpa，通过增压灌装系统后压力为：      0.5-16.0Mpa,详细技术环节。

1，Oxygen generator Principles:

PSA oxygen generator uses zeolite molecular sieve as sorbent, produces oxygen by making use of the PSA principle. Under certain pressure, zeolite molecular sieve has different oxygen/nitrogen adsorption capacity, i.e. much more nitrogen adsorption capacity than oxygen adsorption capacity. PLC controls pneumatic valve on/off to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces oxygen with desired purity.

2,Technical target

1.   Compressed Air Pressure:0.6—1.0Mpa     2.  Yield: 3--200Nm3/h   3.Purity:90%--95%

4.  Nitrogen outlet pressure:0.2—0.3Mpa      5.  Dewpoint≤-45℃    6，Consumption：Nm3/min

3,Note:
The set of the system outlet pressure of oxygen is generally 0.2-0.3Mpa, through the pressurization system after the filling pressure :0.5-16 .0 Mpa,.Detailed technical aspects, please call our company 24-hour service hotline :   , or asked me to the company related to the exchange of personnel on-site or by selling back-office to send more relevant information.