一、用途：

      ZJC-100KV击穿电压测试仪（薄膜塑料）由电脑控制，数据采集方式通过光电隔离，有效解决试验过程中的抗干扰问题，软件操作使用方便，能够实时显示动态曲线，同时升压速率无级可调，可以根据自己的需要进行升压速率调节，调节范围在0.1KV-3KV/S，使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。可实时绘制试验曲线，显示试验数据，判断准确，并可保存，分析，打印试验数据。并且能够自动判别试样击穿并采集击穿电压数据及泄露电流，同时能够在击穿的瞬间电压迅速降低自动归零。软件系统操作方便，性能稳定，安全可靠。

二、符合标准：

1、GB1408.1-2006《绝缘材料电气强度试验方法》

2、GB1408.2-2006《绝缘材料电气强度试验方法 

        第2部分：对应用直流电压试验的附加要求》

3、GB/T1695-2005《硫化橡胶工频击穿电压强度和耐电压的测定方法》

4、ASTM D149《固体电绝缘材料工业电源频率下的介电击穿电压和介电强度的试验方法》

三、主要技术要求：

1、设备输入电压： 交流 100KV (普通试验室电源均可兼容)

2、试验电压方式： 交流 0--100 KV ；

                        直流 0--100 KV；

3、电器容量：     10KVA;

4、试验方法：     0-100KV全量程可调;

5、击穿及耐压试验升压速率：

                         0.1 KV/S 

                         0.2 KV/S

                         0.5 KV/S

                         1.5 KV/S

                           2 KV/S

                         2.5 KV/S

                         3.0 KV/S   

6、试验方式：

           直流试验：1、匀速升压  2、阶梯升压  3、耐压试验

           交流试验：1、匀速升压  2、阶梯升压  3、耐压试验

注：根据不同行业的标准，我们可以根据用户的要求，依据贵行业标准，为您定制行业标准所需的特殊测试功能。

7、过电流保护装置应有足够灵敏度以保证试样击穿时在0.1S内切断电源。

8、漏电电流选择：    1—100 mA可由计算机软件自由进行设定。

9、本仪器采用*的无触点原件匀速调压方式，淘汰同类产品中机械传动升压方式。

10、支持短时间内短路试验要求。(其它同类产品无此功能)

11、一次试验可以同时做5个试样。(同类产品一次试验只能做一个试样)

12、电压测量误差：   ≤ 2％

13、试验电压连续可调：0-100 KV

14、耐压时间设定：   0-6小时(可通过软件连续设定)

15、九级安全防护措施： 

                   (1) 超压保护

                   (2)试验过流保护 

                   (3)试验短路保护

                   (4)安全门开启保护

                   (5)软件误操作保护

                   (6)零电压复位保护

                   (7)试验结束放电保护

                   (8)独立保护接地

                   (9)试验完成后电磁放电

四、试验方式：

    1、绝缘试样空气中击穿或耐压试验

    2、绝缘试样浸油中击穿或耐压试验

    3、绝缘试样空气中阶梯击穿或耐压试验

    4、绝缘试样浸油中阶梯击穿或耐压试验

五、击穿电压测试仪（薄膜塑料）试验软件：

    1、在试验过程中可对升压击穿过程绘制实时曲线，每次试验的升压曲线都由不同颜色构成，试验结束后可叠加对比材料的试验数据重复性。

    2、可以随时调取当前及历史试验数据进行查看，编辑及修改参数。

    3、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果。

    4、试验过程中，可随时通过软件决定本次试验是否有效，方便筛选试验结果。

    5、可设置操作口令，做到专机专人操作，避免无关人员误操作。

六、安全保护功能：

    1、试验在试验箱中进行，试验箱门打开时电源加不到高压变压器输入端，即高压侧无电压。100KV测试设备高压电极距离试验箱壁的zui近距离大于270mm，50KV测试设备高压电极距离试验箱壁的zui近距离大于250mm，试验时即使人接触箱壁也不会有危险。

    2、设备要安装单独的保护地线。接保护地线，主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

    3、该试验设备的电路设有多项保护措施，主要有：过流保护、过压保护、漏电保护、短路保护、直流试验放电报警，电磁放电等。

    4、直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.(注：因为直流试验后不放电会危险到人安全,不能直接拿取电极,起到提醒使用人员放电以免造成伤害)。

1. 试验放电装置，电磁铁自动放电放置。
2. 英文介绍A, use:
3. ZJC-100KV by computer control and data acquisition through a photoelectric isolation, effectively solve the problems of anti interference in the process of test, software is easy to operate, can real-time display dynamic curve and rate of pressure rise continuously adjustable, can according to their own needs for boost rate adjustment, the adjustment range in 0.1KV-3KV/S, so that the pressure rate truly uniform, accurate, and can accuray measure the leakage current data. May the real-time renderingcurves, test data show that, to judge accuray, and can save, print the test data analysis. And can automatically determine the sample breakdown and breakdown voltage and leakage current data acquisition, and can rapidly reduce the auto zero at the instant of the breakdown voltage. The software system has the advantages of convenient operation, stable performance, safe and reliable.
   Two, meet the standard:
   1, "GB1408.1-2006 insulated electrical strength of materials testing method"
   2, "GB1408.2-2006 electrical strength of insulating materials test methods
   Part second: Additional requirements for tests using direct voltage "
   3, "GB/T1695-2005 vulcanized rubber breakdown strength and voltage resistance determination method"
   Test methods of solid electrical insulating materials industrial power frequency dielectric breakdown voltage and dielectric strength of 4 ASTM, D149 "
   Three, the main technical requirements:
   1, input voltage: AC 100KV (ordinary laboratory power supply can be compatible)
   2, the test voltage: AC 0--100 KV;
   DC 0--100 KV;
   3, electric capacity: 10KVA;
   4, test methods: 0-100KV full range adjustable;
   5, the breakdown voltage test and pressure rate:
   0.1 KV/S
   0.2 KV/S
   0.5 KV/S
   1.5 KV/S
   2 KV/S
   2.5 KV/S
   3 KV/S
   6, test methods:
   DC test: 1, 2, speed boost step-up voltage 3, pressure test
   AC test: 1, 2, speed boost step-up voltage 3, pressure test
   Note: according to different standards, we can according to user requirements, according to your industry standards, special test functions required for your custom industry standard.
   7, the overcurrent protection device should be sensitive enough to ensure the sample breakdown in 0.1S power off.
   8, the leakage current selection: 1 - 100 mA can be set free by computer software.
   9, the instrument adopts advanced contactless original uniform pressure, the elimination of the mechanical drive boosting mode of similar products.
   10, support the short circuit test requirements within a short period of time. (other similar products without this feature)
   11, a test can be done in 5 samples at the same time. (a test of similar products can only do a sample)
   12, voltage measurement error: = 2%
   13, the test voltage continuously adjustable: 0-100 KV
   14, pressure time: 0-6 hours (set by software continuously set)
   15, nine security measures:
   (1) overpressure protection
   (2) test overcurrent protection
   (3) test short circuit protection
   (4) safety door opening protection
   (5) software protection misoperation
   (6) zero voltage reset protection
   (7) test over discharge protection
   (8) independent grounding protection
   (9) after the completion of test electromagnetic discharge
   Four, test methods:
   1, insulation breakdown or pressure test samples in air
   2, insulation breakdown or compressive specimen immersed in test
   3, insulation breakdown voltage ladder or samples in air test
   4, insulation breakdown voltage ladder or specimen immersed in test
   Five, test software:
   , in the test process can boost the breakdown process in real time curve drawing, each test boost curve by different color, after the end of the test can be superimposed contrast material testing data repeatability.
   2, can at any time to obtain the current and historical test data to view, edit and modify the parameters.
   3, the testing process can modify the test conditions and storage path and automatic storage test results at any time.
   4, during the test, may at any time through the software determines the test is effective, convenient screening test results.
   5, set password, do special person operation, to avoid irrelevant personnel misoperation.
   Six, safety protection function:
   , test in the test chamber were, open the door of the box test power does not come to input end of the high voltage transformer, high voltage side voltage free. 100kV test equipment for high voltage electrode distance test chamber wall of the recent distance is more than 270, high-voltage test equipment of high voltage electrode distance test chamber wall of the recent distance greater than 250mm, test even people who come in contact with the wall of the box will not be in danger.
   2, equipment to install a separate protective ground. The protective earth wire is mainly to reduce the strong electromagnetic interference generated by the breakdown of the sample. Can also avoid the control of computer control.
   3, the test equipment of the circuit with several kinds of protective measures, mainly has: the overcurrent protection, overvoltage protection, leakage protection, short-circuit protection, DC discharge test alarm, electromagnetic discharge.
   4, DC discharge test alarm function: when we finish DC test equipment. When opening the door test equipment will automatically alarm until after using the device discharge device for discharging alarm will automatically be cancelled. (Note: because DC tests on it would be dangerous to people safety to directly take electrode, to remind users discharge so as not to cause harm).
   5, test discharge device, automatic discharge of the electromagnet.