PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 无线通讯 机箱机柜
佛山市绿州机械设备有限公司
该设备用于生产聚氨酯鞋底鞋垫。该设备由三组份聚氨酯低压发泡机和自动圆盘生产线组成。其中生产线有80、100、120、160等工位可供客户选择。
节省65%电力:使用水循环方式加热的方法
省人力:使用自动开合模,亦可选择机械手进行自动浇注
PU鞋垫鞋底浇注机:
这条生产线可以同时制作多种不同颜色的产品。
.X,Y轴设计,满足浇注头上下,左右运动的需要。
.自动灌注、计量准确、注料位置精准。
.混合速度高、原料同步性好,混合均匀。
.*的混合系统设计、混合头更换简单、快速。
PU鞋垫鞋底全自动生产线:
.坚固的机械构造,运行平稳、使用寿命长、节省人工。
.自动开合模具、高强度合模压力、闭合紧密、有效节省原材料。
.自动摇模,满足各种型体的多种摇模方式。
.自动加温,铝合金模板快速导热、节约能源。
.根据国内模具的实际情况,开发出*的模具装夹机构,模具更换简单、快速。
注:我们可以根据客户的实际需求设计以及生产全自动机械。
成品图片:
我们的服务:
我们的优点:
Fully automatic polyurethane PU outsole and insoles automatic foaming equipment/foaming machine
PRODUCT APPLICATION
This polyurethane Foaming machine with mould carrier line can produce various twin-color and single-color polyurethane insoles, outsoles. The mold injection is automatic controlled.
Why choose it:
1. Imported components are used for the metering pump and electrical components, greatly enhancing equipment running reliability and service life.
2. The moulds can be opened and closed automatically by the pneumatic system which can save the labor cost.
3. The molds are heated by circulating water heating system, it can save 3/2 electricity as the traditional way, and the temperature of the molds are stabler.
TECHNICAL DETAILS
Item Name: LZ-XC905 triple-components foaming machine
All power of the machine 12KW,4*380V/60HZ
The type of applicable foam:Sole,insole, walking shoe, etc.
Flux of inject:30g-100g/S (Attention:the flux could be configured)
The press of infect:0.1MPA-3.99MPA
The mix proportion:100-65;100-110
Viscosity(22°) POLY( polyethylene )500-2000MPAS ISO( Multi-isocyanate )500-2000MPAS
Time of injecting:0.01-9.99/S( precision 0.01S)
Precision of injection:0.1/100
Process of injecting: automatic inject by PLC programmed
Pneumatic pressure:0.6-0.8MPa
Dimension:Wide:2.1M; High:2.35M; Long:3.5M
Weight of the machine:1.5ton
Pouring nozzle:With collision impact needle, Never wear, Never plug
PLC Programmed computer(English demonstration)
It could control 100 patterns’ capacity of injecting at the same time and could wash the Gas-injecting automatically
heat system:It can automatic control temperature
Turntable production line
Total power:22kw
Pneumatic mold station: 100, 120, 160 for choose.
Material for work station:3mm, iron plate
Water heating box:150L,304 stainless steel,18KW
Water-circulating pige:With joints
Line height(without mould):750mm
Driving Motor:3kw
Transducer:1 set
Diameter for production line:About 8 meter
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份