PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 应用方案 无线通讯
深圳市骏慧兴业科技有限公司
深圳市骏慧兴业科技有限公司
暂无信息 |
自锁板端防水连接器零件编号: admin面板式防水IP68推拉自锁连接器具有以下特点：在插合时防水，接触部位防水IP67。经过特殊处理可以达到防水IP68。插头防水，插头尾部要保证防水，必须要求线缆外直径足够圆，并且组装过程保证密封良好，那么可以达到防水IP68等级。如果线缆不足够圆，可以通过尾部注塑成型，从而保证达到防水IP68等级。插头前端可以通过配一个防尘帽，在不使用插头的......
The panel type waterproof IP68 push-pull self-locking connector has the following characteristics:
It is waterproof when inserting, and the contact part is waterproof IP67. After special treatment, it can reach waterproof IP68.
The plug is waterproof. To ensure waterproof at the end of the plug, the outer diameter of the cable must be round enough, and the assembly process must be well sealed, so it can reach the waterproof IP68 level. If the cable is not round enough, it can be molded through the tail injection molding to ensure that it reaches the waterproof IP68 level. The front end of the plug can be equipped with a dust cap. When the plug is not used, the dust cap is used to protect the plug from water ingress. When the plug and the dust cap are inserted, the waterproof level can also reach IP68.
The socket is waterproof and the socket prevents water from entering the device. If the socket wants to be waterproof, it can also be equipped with a dust cap to protect the socket from water. When the socket is inserted into the equipment panel, there is an O-ring on the contact surface between the socket and the panel. When the socket is installed into the equipment, the socket shell will squeeze the O-ring to prevent water from entering the equipment, so as to reach the waterproof level of IP68.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
