PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 无线通讯 机箱机柜
高瑞数控技术(苏州)有限公司
暂无信息 |
The Jones & Shipman 524/624 Easy range, has been designed specifically to offer unrivalled ease-of-use coupled to the highest levels of precision and accuracy. Two (2) models are available with table capacities of 500 x 200 mm & 600 x 200 mm each of which will enable inexperienced and experienced operators alike to be immediately more productive.Incorporating a full colour Touchscreen used to access our own simple and fast-to-set software, coupled with membrane-type touch keys and electronic handwheels, this ‘Self Teach’ grinder at start-up offers the operator three simple options : Manual, Dress or Grind cycle modes. In Manual mode the Easy operates as a simple hand controlled machine, with manual dress and no setup procedures. Work speeds and feeds are adjustable via the touchscreen. Dress mode offers five standard wheel shape options, Flat, Slot, Facing, Vee form and Full ISO with one or two diamonds as needed. Grind Cycle mode allows from 1 only, or up to 20 Grind cycles, as the complexity of the component dictates. Each developed to offer the operator easy-to-follow colour icon based programming screens giving the the advantage of CNC control without the complexity of traditional CNC systems. This extremely simple system guides the operator and allows him to digitise positions and create programs without any computer knowledge.
Specially designed Base, Saddle, Table and Column to offer High Rigidity and Stiffness without loss of Precision.
Fully Interlocked enclosed table guarding.
‘Self Teach’ Colour Touchscreen control.
Fanuc® Digital AC servo motors and drives.
Heidenhain® ‘Absolute’ nano scale feedback.
Equally at home with ‘One Offs’ or Batch Production.
Quicker to set than your old manual machine.
Wheelspindle operates on two pairs of matched High Precision Angular Contact ball bearings.
High Precision Ballscrews on Y and Z axes.
Easy set Proximity switch controlled Hydraulically operated Table feed.
Extremely sensitive wheelfeed assembly.
Easy & Rapid setup for Automatic Cycles.
Easy Manual Operation.
In Cycle/Out of Cycle Dressing with Full Compensation.
Dress on Demand with Full Compensation.
Straight, Facing, Slotting or Vee Form Wheel colour Macros.
Easy Form Dressing of Complex Profiles.
No Expensive & Complex Dressing Devices Required.
Plunge, Area, Face, Multi-Plunge, Multi-Slot, Multi-Plunge & Area grind colour Macros.
Easy Down Load/Up Load to USB memory stick.
524EASY | 624EASY | ||
加工范围 | |||
磨削长度X宽度 | 500×200 | 600×200 | mm |
砂轮到工作台距离(新砂轮) | 380 | 380 | mm |
工作台负荷(包含磁力吸盘在内,如果使用) | 160 | 160 | kg |
砂轮头架 | |||
标准砂轮尺寸 | Φ254×19×76.2 | Φ254×19×76.2 | mm |
砂轮尺寸 | Φ254×19×76.2 | Φ254×19×76.2 | mm |
其它砂轮尺寸 | Φ170或200×19×76.2 | Φ170或200×19×76.2 | mm |
砂轮速度-50Hz | 2400 | 2400 | rpm |
砂轮速度-60Hz | 2880 | 2880 | rpm |
砂轮电机功率:标准/选项 | 2.2/3.75 | 2.2/3.75 | kW |
工作台 | |||
行程/手动/液压 | 610/500 | 710/600 | mm |
速度范围 | 2~25 | 2~25 | m/min |
手轮每一转位移量 | 60 | 60 | mm |
T型槽宽度 | 14.4 | 14.4 | mm |
地面到工作台距离 | 1025 | 1025 | mm |
横向进给 | |||
行程 | 192 | 192 | mm |
电子手轮每一刻度进给量 | 0.001,0.010,0.100 | 0.001,0.010,0.100 | mm |
可编程最小自动进给增量 | 0.0001 | 0.0001 | mm |
自动进给速率 | 1~3000 | 1~3000 | mm/min |
快进速率 | 3000 | 3000 | mm/min |
无火花磨削 | 0~99 | 0~99 | |
横向进给控制 | GEFanuc数字交流伺服电机 | GEFanuc数字交流伺服电机 | |
反馈 | Heidenhain 50纳米光栅尺 | Heidenhain 50纳米光栅尺 | |
砂轮进给 | |||
电子手轮每一刻度进给量 | 0.001,0.010,0.100 | 0.001,0.010,0.100 | mm |
可编程最小自动进给增量 | 0.0001 | 0.0001 | mm |
快进速率 | 3000 | 3000 | mm/min |
进给控制 | GEFanuc数字交流伺服电机 | GEFanuc数字交流伺服电机 | |
FEEDBACK | Heidenhain 50纳米光栅尺 | Heidenhain 50纳米光栅尺 | |
数据传输接口 | RS232+Easy Comm | RS232+Easy Comm | |
尺寸 | |||
机床重量(近似) | 1370 | 1370 | kg |
装运尺寸 | 9.85 | 9.85 | m3 |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
商铺:https://www.gkzhan.com/st221859/
主营产品:精密级车削 高精密级车削及硬车 超高精密级车削及硬车 加工中心 钻攻及交换台加工中心 卧式加工中心 高精密磨床 型材加工中心 工业拧紧自动化 立式珩磨机 汽车雨刮臂杆成型机
智能制造网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份