静电产生棒

 
Puls Charging Bar device is utilized in industry for sticking materials to any surface or to each other. The sticking should be without any defects so then the materials are being unstuck, they should not damage the surface of the material. By utilizing Puls Charging Bar high resistant materials such as paper or plastic now can be easily clamped to surface. By using ionization system electrostatic charging generates the charger system by means of static generator and charging bar.
 
静电产生棒主要用于在工业中将材料粘贴到某个表面或者其他产品上.  粘贴不能有任何失败,否 则材料无法粘牢,  并且也不能破坏材料的表面.  使用 PULS 静电产生棒,高绝缘的材料如纸或者 塑料,现在都可以很容易的贴在表面上.  该静电产生棒与 PULS 静电发生器电源配合组成静电发 生系统!
Charging bar is also designed to use charging in some quantity. Due to resistant connection to high voltage it does not emit a spark and enhances safety of work.  Power supply voltage should be adjusted according to positive and  negative polarity of charging bar.  In sticking application charging bar should keep the distance to being charged materials in 10-20 mm.       静电产生棒也可同时使用好几个.  由于高压连接有电阻,不会产生火花,更安全.  电源电压可根据 静电棒的正负电极作出调整.  在粘贴应用中,  静电发生器需与材料保持 10-20mm  的距离.
Puls charging bar has an aperture behind, which by putting inside of it a plastic bar with M8 x 60 size, supplies simple and safe  installation to any  machine. To  make static charge and sticking applications work properly it is necessary by using the most proper ionizing system to provide  neutralization  before two  materials would  be  stuck to  each  other.(see  Puls  Static Elimination)

 
 
PULS 上海办事处            Herbert 何俊 +86                 邮箱：
 
PULS  静电产生棒的背后有一个开孔,  插入一个 M8*60 的塑料棒,  这让设备的安装更简单安全. 需要打静电或者粘贴应用的时候,在两个材料粘在一起之前,必须采用合适的电离系统提供空气 电离.  让材料带上静电. (  查看 PULS 静电消除)
 
General Specifications
Easy to install / Resistively coupled / Spark-free
 
规格
易于安装/电阻耦合/无火花
 
Applications
In mould labelling (IML) / Bags on roll / DVD manufacture / Board laminating / Compensating stackers / Film winding to roll cores / Flat bag with gusset / Multi sheet feeders / Side weld bag handles / Shrink wrapping / Electrostatic bonding
应用:
模内贴标（IML）/袋卷/ DVD 制造/板层压/补偿绕堆垛机/薄膜缠绕到滚筒/扁平袋/多页进纸 器/侧面焊缝袋处理/收缩包装/静电键合处理
 
 
Operating Voltage  工作电压
Dimension  尺寸
Construction  结构
Ambient Temperature  环境温度 Cable  导线
Operating Distance  工作距离
Mounting  安装
Weight   重量
Lenght  长度
  Polarity  极性

Max. 20kV DC
31 mm x 40 mm PVC
0 - 40ºC
2 - 4 mt
10 - 20 mm      M8 x 60 studs 1,4 kg / mt       Max 3940 mm N=负 / P=正

润携（上海）贸易有限公司专业从事静电发生器、静电消除器、静电产生棒等全系列静电设备，：（曾）