具体成交价以合同协议为准
￥面议
恒天九五重工有限公司
免费会员·4年您现在的位置： 恒天九五重工有限公司>>旋挖钻机>> JVR150Z旋挖钻机
产品介绍
采用双折线绳槽卷筒，使各层之间的负荷均匀分布，大大延长了钢丝绳的使用寿命，提高施工安全性。
The double broken line groove drum is adopted to distribute the load evenly among the layers, which greatly extends the service life of the wire rope and improves the construction safety.
液压系统使用*的负载反馈技术，可使流量按需分配到系统各个工作装置，实现各种工况下的匹配，泵、马达、阀、油管及管接头均采用进口产品，确保高可靠性。
The hydraulic system uses advanced load feedback technology to distribute the flow to each working device of the system as needed to achieve the best match under various working conditions. The pump, motor, valve, tubing and pipe joint all adopt imported products to ensure high reliability.
底盘和上车，履带间距在3000-4000mm之间调整，增加配重重量，提高整机的稳定性和可靠性。
Special chassis and vehicle, track spacing is adjusted between 3000-4000mm, increase the counter weight and improve the stability and reliability of the whole machine.
| 机型 Model | JVR150Z |
| 大输出扭距 Max. output torque (KN.m) | 150 |
| 大钻孔深度 Max. drilling depth (m) | 55 |
| 大钻孔直径 Max. drilling diameter (mm) | 1500 |
| 发动机生产厂家 Engine brand | Cummins |
| 发动机型号 Engine model | QSB 7-C227 |
| 发动机功率 Engine power (KW) | 169 |
| 主泵流量 Main pump flow rate | 2×224 L/min@2100rpm |
| 底盘型号 Undercarriage model | 自制底盘 Self-made undercarriage |
| 牵引力 Traction force (KN) | 345 |
| 钻孔转速 Drilling speed (rpm) | 6 - 38 |
| 大加压力/起拔力 Max. crowd push force (KN) | 150 / 160 |
| 加压系统行程 Stroke of sledge (mm) | 4000 |
| 主卷扬提升力（*层）Main winch pull (1st layer) | 160 |
| 主卷扬绳直径 Main winch wire rope dia. (mm) | Φ26 |
| 主卷扬提升速度 Max. main winch line speed (m/min) | 72 |
| 副卷扬提升力（*层）Aux. winch line pull (1st layer) (KN) | 50 |
| 副卷扬绳直径 Aux. winch wire rope dia. (mm) | Φ18 |
| 副卷扬提升速度 Aux. winch line speed (m/min) | 110 |
| 工作状态设备宽度/高度 Overall width in drilling position (mm) | 4000 / 20361 |
| 运输状态设备长度/宽度/高度 Overall L/H/W transport position (mm) | 14559 / 3000 / 3440 |
| 总重量（含钻杆）Total weight (t) | 53 |
相关产品
-
-
￥面议 -
￥面议 -
￥面议
