具体成交价以合同协议为准
￥面议
上海哲林软件科技有限公司
免费会员·4年您现在的位置： 上海哲林软件科技有限公司>>数据采集器>> Intermec CK30
产品简介
产品介绍
| 产品参数 |
主要技术指标：
硬件系统：
处理器: Intel Xscale PXA255，200或400 MHz
内存：32-64MB SDRAM和32-64MB Flash ROM
显示器：160x160 防划伤、防眩目带背光单色或彩色液晶显示屏
键盘：合成橡胶键盘，可选择简化的数字/功能和完整的字母数字混合布局（42、50 和52 键布局）
接口：SD卡接口；RS232;可选蓝牙通讯或10/100 BaseT以太网（通讯基座提供）
麦克风：可编程的可调音频、音量，提示扫描结果
操作系统：
Microsoft Windows CE.NET 4.2；用户可选装中文、英文等七种系统
软件：
终端仿真：VT/ANSI，5250,3270; 支持Intermec TE2000和第三方仿真软件，以及RDP和远程终端服务
开发环境：嵌入式VC++ 4.0，VB.NET和C#
浏览器支持：IE6和Intermec的dcBrowser
条码扫描器：
可选内置的线性图像扫描器、二维图像扫描器、标准景深激光扫描器、长景深激光扫描器、超长景深激光扫描器、二维激光扫描器
无线局域网：
通讯速率：54Mbps（802.11g）；11Mbps（802.11b）
天线：内置
无线标准：IEEE 802.11g（2.4Ghz,OFDM），IEEE 802.11b(2.4Ghz,DSSS)
输出功率：50mW
保密协议：WEP,WPA,802.1x（EAP-TLS, TTLS,LEAP, PEAP）
无线认证：Wi-Fi，WPA
网络兼容性认证：Cisco CCX V2.0
设备管理：
Intermec SmartSystem?支持集中远程管理
Wavelink Avalanche?管理工具
电源系统：
Intermec的智能电源管理系统
2200mAh可充电锂电池；
环境与结构：
工作温度：0℃－-－50℃
储存温度：－20℃－-－60℃
湿度：10-95%无冷凝
防静电：6KV接触；12KV空气
防尘防水：符合IP53标准
耐冲击：1.2米多次水泥地面跌落无损。
物理：
长x宽x高：208毫米x 33毫米 x 71毫米（带手柄）
重量：490克(带电池)；
主要配件：
通讯机座、车载机座、电池充电器、板机手柄、皮套、通讯电缆、电池、手带、保护套、屏保组件等
CK30/CK31 Batteries, Chargers, Optimizers
Model | Part Number | Description | Comments | Photo Click to view larger Image |
CK30 | AB1 | Battery, Lithium Ion, 2200 mAh, Ck30 | One included with each CK30 2200 mAh Lithium-ion battery required for operation. One included with all CK30 models. "Form-integrated", part of overall shape, i.e. no battery door. Minimum 8 hours life at standard usage model (5 scans/minute; 40% radio duty cycle). Substantially higher battery life with batch. |
|
CK30 CK31 | AB1G | Battery Pack, CK31 | 2400 mAh Lithium-ion. One included with all CK31 models. “Form-integrated", part of overall shape, i.e. no battery door. Minimum 8 hours life at standard usage model (5 scans/minute; 40% radio duty cycle). Substantially higher battery life with batch. Cannot use AB1 because of “key tab" required for CK31 IP64 seal-ing qualification. Can be used with CK30. | |
CK30 CK31 | AC1 | Battery Charger, 4 position, CK30/31 | Charges batteries only, Requires 073573 power supply and AC power cord Charges one to four batteries, either AB1 or AB1G. Desktop configuration. Latching mechanism to make sure battery is properly and reliably seated for failsafe charging. Requires 073573 power supply and AC power cord. Charges batteries in 5 hours. |
|
CK30 CK31 | AC2 | Terminal Charger, 4 position, CK30/31 | For re-charging CK30’s without removing batteries. 5 hours charging time. Same as AD2 without communications. Can be used with pistol grip handle attached to CK30. Requires 073573 power supply and AC power cord. |
|
CK30 CK31 | AC3 | Battery Charger, 8 position, CK30/31 | Charges one to eight AB1 or AB1G batteries. Desktop configuration. Latching mechanism to make sure battery is properly and reliably seated for fail safe charging. Requires 851-064-002 power supply and AC power cord. Charges batteries in 5 hours. |
|
CK30 Cables
Model | Part Number | Description | Comments | Photo Click to view larger Image | Drawing & Pinout Diagram Click to view larger Image |
CK31 | 074144 | Serial (end cap adapter | Converts bottom connector to DB 9 serial, no power. for printers |
|
|
CK30 CK31 | AA1 | Cable, Adapter, Ck RS232 DTE | Converts bottom connector to DB9 serial, 6 in/15cm |
|
|
CK30 CK31 | AA2 | Cable Adapter, CK RS232, 5V on Pin 9, DTE | Converts button connector to DB9 serial, including "power on pin 9", 6 in/15 cm |
|
|
| 3-606034-02 | Cable, RS232, Connection for CK30, 6.5 | Used for connecting 1551, 1553 |
|
CK30 Docks and Accessories
Model | Part Number | Description | Comments | Photo Click to view larger image |
CK30 CK31 | AD1 | Dock, Communications, Single Position, Ck30/31 | Can be used with any CK30/31 for wired communications and/or trickle charging (3 hours). Includes RS-232, USB and Ethernet 10/100 base T connectors. Includes mounting holes for securing to horizontal surfaces. Can be used while pistol grip handle is attached Requires 073573 power supply and AC power cord. |
|
CK30 CK31
| AD2 | Dock, Communications, 4-position, CK30/31 | Functionally, four (4) single bay docks in one fixture with one power supply. Can be used with any CK30/31 for wired communications and/or trickle charging. Can be used while pistol grip handle is attached . Includes 4 ea. RS-232 and 1 ea. Ethernet 10/100 baseT (switch) connectors. Charges in 5 hours. Requires 073573 power supply and AC power cord. |
|
CK30 CK31
| 070268 | Cable, 9F-9, Null-Modem, 7-wire RS232, | 6 feet Use with CK30/31 Comm docks for connection to PC |
|
CK30 CK31
| 073352 | Wall Mount Bracket Kit, Dock, AD2/AC2 | For 4-slot comm dock and terminal chargers. Pair of brackets for mounting AD2 and AC2 to a wall for convenience and reducing space requirements. Provides adequate clearance for all cables as well as pistol grip handles on the CK3x’s. Multiple docks can be sequentially mounted with an additional (single) bracket each.
|
|
CK30 CK31 | 321-576-002 | Cable, USB-A to USB-B, 2 meter | Use with 700 color single dock 225-683-001 for ActiveSync connection to PC USB port (USB-A to USB-B) 2 meter Use with CK30/31 AD1 comm dock for connection to PC
|
CK30/CK31 Holders, Holsters, Belts, & Straps
Model | Part Number | Description | Comments | Drawing click to view larger image | Photo click to view larger image |
CK30 | AG1 | Protective Case, CK30 | Made of a durable water-resistant fabric with clear material over front cover. Keys can still be operated. Zippered access for battery removal/re-insertion. Note: Fits the "thick" back CK30 enclosure used with laser scanner options. The scan opening in the case will be larger than desirable for use with CK30’s using the smaller back enclosure (1D and 2D imagers) and therefore objectionable to many customers. A second case fitted for the smaller enclosure will be made available later. Fits all configurations with scanner options 0, 2, and 3. includes shoulder strap and built-in hａnd strap. Incompatible with AH1 pistol grip handle, al2 hａnd strap or AL3 belt clip |
|
|
CK31 | 074134 | Dust Cover, 52-key, CK31 | Clear 52-key (only) form-fitting protective cover |
|
|
C30 | AG3 | Protective Boot, CK30 | All CK30 models Made of a rubber material that fits around the edges and corners of the CK30 to provide extra protection for rough handling and especially repetitive, rough placement on hard surfaces during usage. Doubles as a high-visibility "overcoat" to improve ability to find when misplaced. |
|
|
CK30 | AH1 | Handle, Pistol grip, w/trigger | Fits all models Removable pistol grip handle for all CK30 models. REQUIRED FOR 50-KEY CONFIGURATIONS (NO INTEGRATED SCAN KEY). Attaches easily with slotted screwdriver (very similar to 2415 attachment type). Once installed, fits into the overall form of the CK30 for a one-piece look and feel. Need never be removed. |
|
|
CK31 | 074141 | Pistol Grip handle with trigger. CK31 only. | Removable pistol grip handle for CK31 models. REQUIRED FOR 50-KEY CON-FIGURATIONS (NO INTEGRATED SCAN KEY). Attaches easily with slotted screwdriver. Once installed, fits into the overall form of the CK31 for a one-piece look and feel. Need never be removed. Same physical handle as AH1 and includes a ‘spacer’ for fit with different contour of CK31 back. |
| |
CK30 | AL1 | Holster with Belt, CK30 | Used for holstering the CK30 when not in use. Use the AL1 for the CK30 with thin bottom enclosure (i.e. configurations with the linear imager or 2D imager). Use the 2415 holster 069583 for the CK30 with thicker bottom enclosure (configurations with standard range laser or ALR). Both are adjustable for either left- or right-handed setup and can be used with or without pistol grip handle. |
|
|
CK31 | 074101 | Holsters with shoulder strap. CK31 | For CK31 models with linear and 2D imager with or without handle. |
|
|
CK30 | AL2 | Hａnd Strap, CK30 | Attaches to the back of the CK30 to stress and fatigue reduction from gripping. Easily released at base for access to battery. Adjustable strap tension for user preference. All CK30 models. Incompatible with AH1 pistol grip handle, AL2 hａnd strap, or AL3 belt clip |
|
|
CK31 | 075289 | Hａnd Strap, CK31 | All CK31 models. Incompatible with 074141 pistol grip handle or belt clip |
|
|
CK30 | AL3 | Swivel Belt Holder, CK30 | Provides a convenient way to secure the CK30 when not in use to any belt without having to use a holster. Works like a cell phone belt clip, with a small attachment screwed on the back of the CK30 that latches into a belt clip with a release button. Base swivel for both thin and thick (imagers and lasers) CK30 form factors. All CK30 models. Incompatible with AH1 pistol grip handle, AL2 hａnd strap or AL3 belt clip |
|
|
CK30 | AL4 | Holster, with Belt, large, CK30 | For CK30 models with laser scanners (Options 2 or 3) with or without handle, In compatible with AL2 hａnd strap or AL3 belt clip. For CK30 models with linear and 2D imager, use AL1 |
|
|
CK30 | AV1 | Vehicle Cradle, CK30 | For mounting CK30 on a forklift or other vehicle. Cradle- only; non-powered (see later release or third party providers for powered version, pick-n-run configuration). |
|
|
相关产品
-
-
￥面议 -
￥面议 -
￥面议
