具体成交价以合同协议为准
￥面议
集影科技（河北）有限公司
免费会员·3年您现在的位置： 集影科技（河北）有限公司>>Winner(天逸)>> YAMAHA(雅马哈)调音台 01V96i
产品介绍
| Mixing capabilityMixing channels32 Mono + 4 Stereo | |||
| GROUP8 | |||
| AUX8 | |||
| MAINStereo | |||
| Input channel functionsGate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan | |||
| Output channel functionsAttenuator, 4-band PEQ, Compressor, Delay | |||
| On-board processors4x SPX multi effectors | |||
| I/OMic inputs12 | |||
| Phantom power+48V DC; ON/OFF per 4ch | |||
| Line inputs2x Stereo, 2x 2tr in | |||
| AD converter24-bit; 128-time over sampling | |||
| Line outputsStereo output, Monitor output, 4x Omni output | |||
| DA converter24-bit; 128-time over sampling | |||
| Digital I/OADAT (8-in/8-out), 2tr in/out | |||
| Expansion slotsMini-YGDAI (16-in/16-out) | |||
| Control and othersTo Host(USB), MIDI, Word clock I/O | |||
| General specifications | |||
| Internal processing32bit, Accumulator | 58bit | ||
| Sampling frequency rateInternal44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz | |||
| External44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) | |||
| Signal delayLess than 1.6ms CH INPUT to STEREO OUT (@SampIing frequency = 48kHz) / Less than 0.8ms CH INPUT to STEREO OUT (@SampIing frequency = 96kHz) | |||
| Total harmonic distortionCH INPUT to STEREO OUT | Less than 0.05%, 20Hz to 20kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 48kHz) / Less than 0.05%, 20Hz to 40kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 96kHz) | ||
| Frequency responseCH INPUT to STEREO OUT | 0.5, -1.5dB, 20Hz - 20kHz @+4dBu into 600Ω(@SampIing frequency = 48kHz) / 0.5, -1.5dB, 20Hz - 40kHz @+4dBu into 600Ω(@SampIing frequency = 96kHz) | ||
| Dynamic range110dB typ. DA Converter (STEREO OUT) / 105dB typ. AD+DA (to STEREO OUT) @fs=48kHz / 105dB typ. AD+DA (to STEREO OUT) @fs=96kHz | |||
| Hum & noise levelEquivalent input noise-128dBu Equivalent Input Noise. | |||
| Residual output noise-86dBu residual output noise. STEREO OUT | STEREO OUT off. / -86dBu (90dB S/N) STEREO OUT | STEREO fader at nominal level and all CH INPUT faders at minimum level. / -64dBu (68dB S/N) STEREO OUT | STEREO fader at nominal level and one CH INPUT fader at nominal level |
| Crosstalk-80dB adjacent input channels (CH1-12) / -80dB adjacent input channels (CH13-16) / -80dB input to output | |||
| Power requirementsAC100V, 120V, 220-240V 50/60 Hz | |||
| Power consumption90W | |||
| DimensionsW436mm; 17-1/8in | |||
| H148mm; 5-7/8in | |||
| D548mm; 21-5/8in | |||
| Net weight14kg; 30.86lbs | |||
| OthersFader | 100mm motorized x17 | ||
| Analog Input Characteristics | |||
| Input TerminalPADGAINActual Load ImpedanceFor Use With NominalInput LevelConnector | |||
| SensitivityNominalMax. before clip | |||
| CH INPUT | |||
| 1 to 120-60dB3kohms50-600ohm Mics & 600ohm Lines-70dBu-60dBu-40dBuA | XLR-3-31 type (Balanced) | ||
| B | TRS phone jack (Balanced) | ||
| -16dB-26dBu-16dBu+4dBu | |||
| 20-6dBu+4dBu+24dBu | |||
| CH INPUT | |||
| 13 to 16-26dB10kohms600ohm Lines-36dBu-26dBu-6dBuTRS phone jack (Balanced) | |||
| +4dB-6dBu+4dBu+24dBu | |||
| CH INSERT IN 1 to 1210kohms600ohm Lines-12dBu-2dBu+18dBuTRS phone jack (Unbalanced) | |||
| 2TR IN [L,R]10kohms600ohm Lines-10dBV-10dBV+10dBVRCA pin jack (Unbalanced) |
相关产品
