上海倍加福工业自动化贸易有限公司
免费会员·3年
您现在的位置: 上海倍加福工业自动化贸易有限公司>>工业电源>> PS1000-D2-24.40.RM
产品介绍
技术参数节选 PS1000-D2-24.40.RM
Electrical specifications | ||
---|---|---|
Voltage drop | input to output 72 mV at input 2 x 10 A 140 mV at input 2 x 20 A | |
Power dissipation | 0.23 W no load 1.7 W at input 2 x 10 A 5.9 W at input 2 x 20 A | |
Input | ||
Rated voltage | 12 ... 28 V | |
Voltage range | 8.4 ... 36.4 V DC | |
Current | 2 x 20 A at ambient temperature < 60="" °c="" (140="" °f)=""> 2 x 15 A at ambient temperature 70 °C (158 °F) 2 x 20 ... 32.5 A for up to 5 s for lower output currents see technical information | |
Output | ||
Voltage range | 12 ... 28 V DC | |
Current | 40 A at ambient temperature < 60="" °c="" (140="" °f)=""> 30 A at ambient temperature < 70="" °c="" (158="" °f)=""> 65 A for up to 5 s max. 26 A in overload or short circuit mode (voltage < 6="" v=""> | |
Galvanic isolation | ||
Input/Output | SELV/PELV | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | IEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 | |
Low voltage | ||
Directive 2014/35/EU | EN 61010-1 | |
RoHS | ||
Directive 2011/65/EU (RoHS) | IEC/EN 63000:2019 | |
Conformity | ||
Degree of protection | EN 60529 | |
Shock resistance | EN 60068-2-27 | |
Vibration resistance | EN 60068-2-6 | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) , see technical information | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Relative humidity | 5 ... 95 %, noncondensing | |
Shock resistance | 20 g , 11 ms or 30 g , 6 ms | |
Vibration resistance | 2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g | |
Mechanical specifications | ||
Housing material | aluminum alloy , galvanized steel | |
Degree of protection | IP20 | |
Connection | ||
Input | screw terminals conductor cross section: max. 6 mm2 (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: recommendet 0.8 Nm | |
Output | screw terminals conductor cross section: max. 16 mm2 (AWG 22-8) cable diameter: max. 5.2 mm, wire end ferrules included stripped insulation length: 12 mm tightening torque: recommendet 1.2 Nm | |
Mass | approx. 280 g | |
Dimensions | 36 x 124 x 127 mm (W x H x D) , without DIN mounting rail | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas | ||
ATEX approval | ||
ATEX certificate | EPS 11 ATEX 1 312 X | |
ATEX marking | II 3G Ex ec II T4 Gc | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-7:2016 , EN 60079-15:2010 | |
International approvals | ||
UL approval | E223176 | |
IECEx approval | ||
IECEx certificate | IECEx EPS 20.0057X | |
IECEx marking | Ex ec IIC T4 Gc | |
Standards | IEC 60079-0:2011 , IEC 60079-7:2015 , IEC 60079-15:2010 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see . |
Classifications
System | Classcode |
---|---|
ECLASS 13.0 | |
ECLASS 12.0 | |
ECLASS 11.0 | |
ECLASS 10.0.1 | |
ECLASS 9.0 | |
ECLASS 8.0 | |
ECLASS 5.1 | |
ETIM 9.0 | EC002542 |
ETIM 8.0 | EC002542 |
ETIM 7.0 | EC002542 |
ETIM 6.0 | EC002542 |
ETIM 5.0 | EC002542 |
UNSPSC 12.1 |