PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 应用方案 无线通讯
佛山顺德无忧智能机械设备有限公司
佛山顺德无忧智能机械设备有限公司
暂无信息 |
| 设备尺寸 | 2750X1150X1150mm | 可装切刀型号规格 | 直径150X38.1X2.0mm |
|---|---|---|---|
| 可卷布范围 | 直径400mmX1800mm | 配套纸筒尺寸 | 内径39-40mmX1500mm |
佛山无忧箱式自动红外对边直斜纹打卷机适用于任何针梭织布料、皮料、革料、EVA料、无纺布、化纤布、棉麻、橡胶、贴合、复合类材料的直纹、斜纹、横纹复卷。设备有滚轮与支撑杯，方便运输和水平支撑调节，美观；设备工作中无噪音，不扰民；收料自动红外对边，直纹卷取整齐，减少切条边角浪费；
设备参数与详情性能说明：Equipment parameters and performance description:
A：设备尺寸Equipment size：2750X1150X1150mm；
B：设备功率Equipment power：2.2KW/220V/380V/50Hz；
C：设备重量Equipment weight：净重Net weight:630KG；
D：可卷布范围Rolling range：直径diameter:400mmX1800mm；
E：配套纸筒尺寸：内径39-40mmX1500mm；
F：可装切刀型号规格Model and specification of cutter：
直径diameter:150X38.1X2.0mm；
G：斜纹角度有刻度盘刻度，角度调节方便，无需三角板对位；
The twill angle has a dial scale, which is convenient for angle adjustment without triangle alignment;
H：风机风量大，使用180W风机鼓风；
The air volume of the fan is large, and 180W fan is used for blowing;
I：收卷速度变频无级调速；
Variable frequency stepless speed regulation of winding speed;
J：收卷方向、切刀、风机、自动对边控制器、电子米表旋钮可转换；
Winding direction, cutter, fan, automatic edge alignment controller and electronic meter knob can be switched;
K：前后两个脚踏开关，斜纹直纹横纹脚踏控制，操作方便简单；
Front and rear foot switches, twill, straight and horizontal, foot control, convenient and simple operation;
L：收料滚筒采用直径110mm专业加工、滚花、电镀，不是热轧水管缠胶，表面滚花磨光，不生锈，滚筒大，材料直径可以收卷更大不掉料；
The receiving drum adopts professional processing, knurling and electroplating with a diameter of 110mm. It is not wrapped with rubber by hot-rolled water pipes. The surface is knurled and polished without rust. The drum is large, and the material diameter can be rolled larger without falling off;
M：刀位与张紧放松采用导轨滑块式锁紧，方便快捷；
The tool position and tension relaxation are locked by guide rail sliding block, which is convenient and fast;
N：放料杆直径25mm，两端锥头，易穿直纹捆布，配备布料放料挡板；
The diameter of the discharge rod is 25mm, the cone heads at both ends are easy to wear straight grain binding cloth, and the cloth discharge baffle is equipped;
O：配置电子码表，实时测量卷布尺寸，可以设定数值自动到数停机；
Configure an electronic code meter to measure the size of the rolled cloth in real time, and set the value to stop the machine automatically;
P：配置动力展纹杆，展纹速度可以变频无级调速；
Equipped with power leveling rod, the leveling speed can be variable frequency stepless speed regulation;
Q：压杆随动滚筒直径65mm专业加工滚花镀铬，同步滚动压布，卷布紧实，确保切条质量平实；
The diameter of the pressure bar follow-up drum is 65mm. It is professionally processed, knurled and chrome plated, and the cloth is rolled synchronously. The cloth is tight to ensure the smooth cutting quality
R：随动杆增加4个，方便紧松多样式穿杆；
4 additional follow-up rods for easy tightening and loosening of multi style threading rods;
S：动力机构采用箱体包装，电控线路标准号码管接布线，安全，方便维修；
The power mechanism adopts box packaging, and the standard number of electric control circuit is connected and wired, which is safe and convenient for maintenance;
T：卷布主动力采用1.5KW+涡轮蜗杆减速箱传动，不打滑，动力强；
The main force of cloth rolling adopts 1.5KW + worm gearbox transmission, which does not slip and has strong power;
U：斜纹杆粗，强度好，角度稳定；
The twill rod is thick, with good strength and stable angle;
V：收料自动红外对边，直纹卷取整齐，减少切条边角浪费；
Automatic infrared edge alignment for material receiving, neat straight line coiling, reducing the waste of slitting edges and corners;
W：设备有滚轮与支撑杯，方便运输和水平支撑调节，美观；
The equipment has rollers and supporting cups, which are convenient for transportation and horizontal support adjustment, and beautiful;
X：设备工作中无噪音，不扰民；
There is no noise during the operation of the equipment and does not disturb the residents;
Y：该设备适用于任何针梭织布料、皮料、革料、EVA料、无纺布、化纤布、棉麻、橡胶、贴合、复合类材料的直纹、斜纹、横纹复卷。
The equipment is suitable for rewinding straight grain, twill and transverse grain of any needle woven fabric, leather material, EVA material, non-woven fabric, chemical fiber cloth, cotton hemp, rubber, lamination and composite materials.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
