PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 应用方案 无线通讯
佛山顺德无忧智能机械设备有限公司
佛山顺德无忧智能机械设备有限公司
暂无信息 |
| 可卷布范围 | 直径400mmX1800mm | 配套纸筒尺寸 | 内径39-40mmX1500mm |
|---|---|---|---|
| 可装切刀型号规格 | 直径150X38.1X2.0mm |
设备参数与详情性能说明：Equipment parameters and performance description:
A：设备尺寸Equipment size：2400X950X1050mm；
B：设备功率Equipment power：1.8KW/220V/380V/50Hz；
C：设备重量Equipment weight：净重Net weight:480KG；
设备参数与详情性能说明：Equipment parameters and performance description:
A：设备尺寸Equipment size：2400X950X1050mm；
B：设备功率Equipment power：1.8KW/220V/380V/50Hz；
C：设备重量Equipment weight：净重Net weight:480KG；
D：可卷布范围Rolling range：直径diameter:400mmX1800mm；
E：配套纸筒尺寸Matching paper cylinder size：
内径：internal diameter39-40mmX1500mm；
F：可装切刀型号规格Model and specification of cutter：
直径diameter:150X38.1X2.0mm；
G：斜纹角度有刻度盘刻度，角度调节方便，无需三角板对位；
The twill angle has a dial scale, which is convenient for angle adjustment without triangle alignment;
H：风机风量大，使用180W风机鼓风；
The air volume of the fan is large, and 180W fan is used for blowing;
I：收卷速度变频无级调速；
Variable frequency stepless speed regulation of winding speed;
J：收卷方向、切刀、风机旋钮可转换开关；
Winding direction, cutter and fan knob can be switched;
K：前后两个脚踏开关，斜纹直纹脚踏控制，操作方便简单；
Front and rear foot switches, twill and straight foot control, easy and simple operation;
L：收料滚筒采用直径110mm专业加工、滚花、电镀，不是热轧水管缠胶，表面滚花磨光，不生锈，滚筒大，材料直径可以收卷更大不掉料；
The receiving drum adopts professional processing, knurling and electroplating with a diameter of 110mm. It is not wrapped with rubber by hot-rolled water pipes. The surface is knurled and polished without rust. The drum is large, and the material diameter can be rolled larger without falling off;
M：双螺杆摇柄自由调节斜纹切刀位，布料自由张紧放松；
The position of twill cutter can be freely adjusted by twin-screw handle, and the cloth can be tensioned and relaxed freely;
N：放料杆直径25mm，两端锥头，易穿直纹捆布，配备布料放料挡板；
The diameter of the discharge rod is 25mm, the cone heads at both ends are easy to wear straight grain binding cloth, and the cloth discharge baffle is equipped;
O：配置机械码表，实时测量卷布尺寸；
Configure mechanical code meter to measure the size of rolled cloth in real time;
P：压杆随动滚筒直径65mm，专业加工滚花镀铬，侧带链轮链条，同步滚动压布，卷布紧实，确保切条质量；
The diameter of the follower roller of the pressure bar is 65mm. It is professionally processed with knurled chrome plating, side belt sprocket chain, synchronous rolling and pressing cloth, and the cloth is tight to ensure the cutting quality;
Q：设备占地小，有滚轮与支撑杯，方便运输和水平支撑调节；
The equipment occupies a small area and has rollers and support cups, which is convenient for transportation and horizontal support adjustment;
R：设备工作中无噪音，不扰民；
There is no noise during the operation of the equipment and does not disturb the residents;
S：该设备适用于任何针梭织布料、皮料、革料、EVA料、无纺布、化纤布、棉麻、橡胶、贴合、复合类材料的直纹、斜纹、横纹复卷。
The equipment is suitable for rewinding straight grain, twill and transverse grain of any needle woven fabric, leather material, EVA material, non-woven fabric, chemical fiber cloth, cotton hemp, rubber, lamination and composite materials.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
