具体成交价以合同协议为准
￥面议
广东贝尔试验设备有限公司
免费会员产品简介
产品介绍
一、用途use：
桌上型拉力试验机可测试各种材料、半成品及成品的抗拉、抗压强度及伸长量、延伸率，可做剥离、撕裂、抗弯、抗折、压缩……等试验,适合金属、塑料、橡胶、纺织品、合成化学制品、电线电缆、皮革等行业使用。
二、依据标准Based on the standard：
2.01.本试验机根据《电子式试验机》GB/T 16491-1996标准制造。
2.02.本试验机根据GB/T12160-2002《单轴试验用引伸计的规定》和GB/T16825-1997《拉力试验机的检验》进行检定和验收。
三、技术参数：
3.1.型 号.： BF-BL-5KN
3.2.容量选择： 5000N（500Kg）
3.3.显示方式： LCD显示LCD
3.4.分 辨 率： 1/10，000
3.5.精 度： 小于less than±0.5%
3.6.无级变速： 50~500mm/min可调
3.7.单位切换： kg,N,LB(公斤,牛顿,英镑)
3.8.试验行程： *大650mm（不含夹具）
3.09.试验空间： 直径120mm范围
3.10.停机模式： 过载停机、试件破坏停机、上下限设定停机、设定点停机
3.11.打印项目： 日期、时间、试验次数、力量*大值、平均值等
3.12.动 力： 变频马达
3.13.机台尺寸： 64×45×120cm
3.14.机台重量： 70KG
3.15.电 源： 1φ、220V/50Hz
Desktop tension tester
一.USE
This product can test various materials, semi-finished products and finished products tensile and compressive strength and elongation, elongation, can do stripping, rent, bending, bending, compression...... Such experiment, suitable for metal, plastic, rubber, textiles, synthetic chemical products, electric wire and cable, leather industries use
This product can test various materials, semi-finished products and finished products tensile and compressive strength and elongation, elongation, can do stripping, rent, bending, bending, compression...... Such experiment, suitable for metal, plastic, rubber, textiles, synthetic chemical products, electric wire and cable, leather industries use
二、 Based on the standard：
2.01 This tester according to the electronic universal test machine "GB/T 16491-1996 standard manufacturing
2.02 This tester according to GB/T12160-2002 "single axis to experiment with extension millions of regulations and GB/T16825-1997" tension tester inspection of verification and inspection
三、Technology parameters：
3.01Model No. BF-BL-5KN
3.02Selection of capacity： 5000N（500Kg）
3.03Display mode：LCD display
3.04Resolution：1/10，000
3.05Precision：less than±0.5%
3.06Stepless speed change：50~500mm/minadjustable
3.07Unit switchover: kg, N, LB
3.08Test route: maximum 650mm (excluding fixtures)
3.09Test space: within the scope of 120mm diameter
3.10Stop mode: stop due to overload, specimen damage, upper & lower limit settings, set point
3.11Printed items: date, time, number of tests, maximum force value, average force value, etc.
3.12Motive power: frequency conversion motor
3.13Machine dimension: 64×45×120cm
3.14Machine weight: 70KG
3.15Power supply: 1φ,220V/50Hz
相关产品
-
-
￥面议 -
￥面议 -
￥面议
