Opt. 01 | Tracking Generator | Tracking Generator - Frequency Range: 9k~2.7GHz - Amplitude Range: -50dBm~0dBm - Amplitude Accuracy: ±1dB@100MHz, 0dBm - Amplitude Flatness: ±1dB@0dBm - Harmonics: <-30dBc typical - Reverse Power: +30dBm - Impedance: Type: N female, 50Ω nominal - RF output VSWR: < 1.5:1
|
Opt. 02 | AC/DC Battery Operation with Battery Pack | * 11.1V Li-Ion battery pack *2 |
Opt. 03 | ± 1ppm Stability | * ±1ppm, 0~50 °C , ±1ppm/yr |
Opt. 06 | GPIB Interface | * IEEE 488 |
Opt. 12 | EMI Filter (*) | * RBW selections: 9kHz & 120kHz, 6dB bandwidth, Accuracy: 15%
|
Opt. 13 | Demodulator (*) | * Demodulation: AM, FM ; Output: Internal speaker, 3.5mm stereo jack wired for mono operation
|
Opt. 14 | EMI Filters and 300Hz RBW (*) | |
Opt. 15 | EMI Filters and Demodulator(*) | * RBW Selections: 9kHz and 120kHz, 6dB bandwidth * RBW Accuracy: 15% ; Demodulation: AM, FM * Output: Internal speaker, 3.5mm stereo jack wired for mono operation |
Opt. 16 | EMI Filters, 300Hz RBW and Demodulator (*) | * RBW Selections: 9kHz and 120kHz, 6dB bandwidth 300Hz, 3dB bandwidth * RBW Accuracy: 15% ; Demodulation: AM, FM * Output: Internal speaker, 3.5mm stereo jack wired for mono operation
|
NOTE : 1. (*)Only one option could be selected among option 12 to 16 for any given GSP-827 unit 2. All options are factory-installed.
|
OPTIONAL ACCESSORIES |
ATA-001 | BNC Antenna (An additional ADP-001 is needed for fitting GSP spectrum analyzers) |
ATA-002 | Near Field Probe (An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers) |
RLB-001 | Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz |
GTP-3000 | Passive touch Probe Set PR-03: Passive touch probe, SMA(F) ADP-002: Adaptor, SMA(J/F) ~ N(P/M) GTL-303: RF Cable Assembly, SMA(P/M), 600mm |
GKT-001 | General Kit set ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2 ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1 GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2 GSC-002: Kit box x 1 |
GKT-002 | CATV Kit set ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2 ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2 GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2 GSC-003: Kit box x 1 |
GKT-003 | RLB Kit set GAK-001: termination 50 , N(P/M) x 1 GAK-002: Cap with chain, N(P/M) x 1 GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2 GSC-004: Kit box x 1 |
GKT-006 | EMI Probe Kit set ANT-01: 6cm Loop, H-Field Probe x 1 ANT-02: 3cm Loop, H-Field Probe x 1 ANT-03 6mm Stub tip, E- Field Probe x 1 PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1 ADP-01: N(P/M)~BNC(J/F) Adapter x 1 Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1 Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1 |
GRA-404 | Rack Adapter Panel Rack Mounting (19", 4U) |
GSC-001 | Soft Carrying Case |
GTL-301 | RF Cable RG 223 N(P/M), 1000mm |
GTL-401 | DC Power Cord DC power cord with DC Jack and lighter plug, Current 5A |
