沃茨氟塑料衬里楔式闸阀厂家氟塑料衬里楔式闸阀价格氟塑料衬里楔式闸阀批发
Z41F46 面议PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 无线通讯 机箱机柜
中国山东联合阀门股份有限公司
制造与验收技术条件按日本火力发电用阀门标准E101和JB/T3595-93的规定;
结构长度按E101的规定或按用户提供尺寸
焊接坡口接电力工业管理标准78DG的规定或按用户提供尺寸。
一、产品引用标准:
● 制造与验收技术条件按日本火力发电用阀门标准E101和JB/T3595-93的规定;
● 结构长度按E101的规定或按用户提供尺寸
● 焊接坡口接电力工业管理标准78DG的规定或按用户提供尺寸。
● The manufalture and aueptanle specigication shan be based on the japanese standard E101 applied for the thermal powerand JB/T3595-93
● The length shall bein line with E101 or by user’s speeification.
● Welding groove shan be in auordanle with power industrh spe-cification 78DG or hg user’ specification
● The size in inclose is old production’s size
二、主要零件的材料说明:
性能规范Property and specifiecation
| ||||||
产品型号 Product type 公称压力PN(MPa)Nominal pressure | 试验压力(MPa)Test pressure | 工作压力(MPa) Working pressure | 工作温度(℃) Working temperature | 适用介质 Appicable medium | ||
强度试验 Sheel test | 密封试验/上密封实验 Seal test | |||||
Z960Y-250 | 25 | 37.5 | 27.5 | - | ≤425 | 水、蒸汽、Water,steam |
Z960Y-320 | 32 | 48.0 | 36.0 | - | ≤425 | |
Z960Y-P54100 | - | 30.0 | 22.0 | P5410 | ≤540 | 蒸汽 Steam |
Z960Y-P54170 | - | 48.0 | 36.0 | P5417 | ≤540 | |
主要零件材料Matecrial for main parts | ||||||
零件名称Part name | 材料牌号Material designation | |||||
阀体Body | WCB | WC6 | WC9 | |||
阀板Disc | WCB | WC6 | WC9 | |||
阀盖Bonnet | 25 | 12Cr1Mo1VA | ||||
阀杆Stem | 1Cr17Ni2 | 20Cr1Mo1VA | ||||
阀座Seat | 25 | 12Cr1Mo1VA | ||||
密封环Sealing ring | S软钢(增强柔性石墨)S soft steel (flexible graphite) | S软钢S soft steel | F软钢F Soft steel | |||
填料Packing | 增强柔性石墨Fexible graphite | |||||
支架Yoke | WCB | WCB或WC6 | ||||
阀杆螺母Stem nut | 45(ZCuZn25A16Fe3Mn3) | |||||
四开环Four piece ring | 1Cr13 | 20Cr1MoVA | |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
沃茨氟塑料衬里楔式闸阀厂家氟塑料衬里楔式闸阀价格氟塑料衬里楔式闸阀批发
Z41F46 面议智能制造网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份