PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 无线通讯 机箱机柜
湖北澳星环保成套设备有限公司
湖北澳星环保成套设备有限公司
暂无信息 |
自动调节高温蝶阀，普遍适用于建材、玻璃、矿山、电力、轻工、造纸等行业的通风、环保工程、烟气治理、热能回收等管道系统中
自动调节高温蝶阀，普遍适用于建材、玻璃、矿山、电力、轻工、造纸等行业的通风、环保工程、烟气治理、热能回收等管道系统中。对管道中气体介质按不同控制信号调节流量大小和切断。
This valve is widely used in the pipe system such as venting，environment protection, cont-rolling smoke and collecting waste heat in building material, glass, mining, power, light industry and papermaking departments. It can change the flow and cut off gas medium in the pipe by the different control signal.
结构特点：
Structure characteristic:
自动调节高温蝶阀，采用不锈钢、优质碳钢焊接。具有耐高温、耐磨损、结构合理、流阻损失小、操作灵活、指示方位明确、维护方便、使用寿命长等优点。可水平安装或垂直安装。配用DKJ、ZKJ、伯纳德等电动执行器及有关配件，可实现手动、自动无干扰切换，微机程控、自动控制或集中控制，是实现自动化控制操作、调节流量的理想设备。
The valve is welded in stainless steel and fine carbon steel, having the features of high-temperature resistance, compact structure, endurance, little in the lost of flow resistance, definite direction, easy to maintenance and long life. It can be installed in horizontal or vertical. The valve is used with DKJ, ZKJ, Bernard electric actuator and other accessory to form a complete set to realize manual and automatic exchange without interference, micro-computer long-range control, automatic control or center concentrating control. It is the ideal equipment of realizing operation of automatic control and adjusting flow.
性能参数：
Performance parameter:
公称压力 Nominal pressure | 介质流速 Medium velocity | 泄漏率 Leakage ratio | 适用温度 Suitable temperature | 适用介质 Suitable medium |
0.05MPa | ≤25m/s | ≤1.5％ | ≤450℃ | 空气、烟气、粉尘气体等高温气体 Air, smoke , gas with powder, etc |
≤650℃ |
Using explanation and information for order is in page 19-20.
Actuator code, parameter and principle diagram selected by users is in page
外形图及外形连接尺寸请与我司联系
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
