特点Features。
.高质感外观，机体采用圆弧造型，衷面经烤漆处理，并采用平面无反作用把手，操作容易，安全可命。
.长方形复层玻璐观日口，可在试孩中进行试验品观察使用，宙口具防汗电热器装，可防止水气凝结水滴，
及高亮度PL荧光灯保持箱内照明。
.箱门双层隔热密封条，可有效隔绝内部沮度泄漏。
.具可外接式供水系统，方便于补充加湿捅供水，并自动回收使用。
.制冷除湿系统采用法国“泰康”品牌压缩机，具有节能、低噪音、低能耗、性能称定等优点，采用环保冷媒(R23, R404a )。
.控制器采用进口LCD显示屏幕.可同时显示洲定值及设定值、时间等。
.控制器具有多段程序编辑及温度、湿度可做快速(QUICK)或斜率(SLOPE》控制。
.机台底部安装移动滑轮及定位脚杯便于移动、摆放及固定位，。
.High texture appearance, the machine body is shape, and the surface is painted and uses the plane without reaction handle which is safe and reliable and easy to operate.
.Rectangular mufti-layer glass view window is used to observe the test products in the testing. The window with anti-sweat electric heater device
can prevent condensation water droplets; the window also has brightness PL fluorescent lamp to keep the inside machine light.
.The door's double insulated seal strip can effectively isolate internal temperature leakage.
.The external water supply system is convenient for supplementing water to humidfication cation barrel pot, and the water can recycle automatically.
.Refrigeration and dehumidification system adopts French “Taikang" brａnd compressor, with the advantages of energy saving, low noise, low
energy consumption, and stable performance, and adopts environmental protection refrigerant (R23, R404a).
.Controller adopts imported LCD display screen which can simultaneously display measured value and the set value, time, etc.
.Controller has mufti-segment program, so editing and temperature and humidity can quickly and sloped control.
.The bottom of machine is installed pulley and positioning foot cups which is convenient to move,place and fix position.
技术参数
| 型号Model | RL-A1-40(A-G) | RL-A1-80(A-G) | RL-A1-150(A-G) | RL-A1-225(A-G) | RL-Al-408(A--G) | RL-A1-608(A-G) | RL-A1-800(A-G) | RL-A1-1000(A-G) |
| 内部尺寸WxHxD(cm) | 30x45x30 | 40x50x40 | 50x60x50 | 50x75x60 | 60x85x80 | 80x95x80 | 100x100x80 | 100x100x100 |
| 外部尺寸WxHxD(cm) | 80x132x84 | 90x137x95 | 100x147x105 | 100x162x115 | 110x172x130 | 150x187x10 | 150x187x130 | 150x187x150 |
| 温度范围 Temperature Range | -70℃一+100C(150C)(A:25"C B:OC C:-20`C D:-40'C E:-500C F:-60'C G:-70"C) |
| 湿度范围Humidity Range | 20%-98%R. H. (10%-98%R. H/5%-98%R. H为特殊选用条件R.H is a special optional condition) |
| 温湿度解析精度/均匀度 | 0.011C;0.1 %R.H./土1.0C;士3.0%R.H. |
| 温湿度控制精度/波动度 | 士1.0C:士2.0%R.H./士0.5C;土2.0%R.H. |
| 升温降温时间 | 约3.0C/分钟;约，.01C/分钟(每分钟下降2C-10℃以上为特殊选用条件) 助proximately 3.0C/minute; approximatelyl.OC/minute("2℃-10 Cdecrease per minute" is a special optional condition) |
| 内外部材质 | 冷轧钢板烤漆处理，内箱SUS 304#为不锈钢 Cold-rolled steel paint the inner box is SUS304# stainless steel. |
| 保温材质 | 耐高温高密度聚胺脂硬质发泡绝缘体材料 High temperature resistant high density polyurethane rigid foam insulation materials. |
| 冷却系统 | 风冷力单段压缩机(-20C)，风、水冷式了双段压缩机(-40C--70C) Air cooling /single segment compressor (-2090), air water cooling/double segment compressor |
| 保护装置 | 无熔丝开关、压缩机过载保护开关、冷媒高压保护开关、超湿度超高温产开关、保险丝、故障警告系统 Fuse-free switch, overload protection switch for compressor巾动ａnd low voltage coolant protection switch, over-humidity and over-temperature, fuses, failure warning system |
| 配件 | 记录器(选购)、观视窗、50mm测试孔、PL箱内灯、隔板、干湿球纱布 Recorder (optional), watching window, 50mm testing hole,PL internal bulbs,partition plate, dry and wet ball gauze |
| 控制器 | 韩国“TEMI" South Korea "TEMI”或日本“OYO”牌Japan's "OYO" Brand任选Optional |
| 压缩机 | 法国“泰康”牌France's "Tecumseh" Brand |
| 电源 | 1 Φ220VAC土10% 50/60HZ&3φ380VAC土10% 50/60HZ |
