当前位置：东莞市瑞力检测设备有限公司>>力学类设备>>电池挤压试验机>>动力电池针刺试验机

动力电池针刺试验机

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质其他

所在地

在线询价收藏产品

更新时间：2023-04-04 07:10:51浏览次数：206次

联系我时，请告知来自智能制造网

产品分类 品牌分类

暂无信息

东莞市瑞力检测设备有限公司

经营模式：其他

商铺产品：59条

所在地区：

联系人：黄先生

询价 给他留言

产品简介

动力电池针刺试验机

详细介绍

产品用途Purpose:

电池针刺试验机通过针刺试验检验电池的安全性能，通过实时试验数据(如电池电压、电池表面温度、压力视频数据进行实验结果判定)针刺试验结束后电池应不起火，不爆炸、不冒烟;也是各电池厂家及研究所的检测设备。

产品特点 Product Feature

Qc743老标准要求:

用直径@3mm~8mm的耐高温钢针、以IOmm/s~40mmls的速度，从垂直于蓄电池模块极板的方向贯穿至少三个蓄电池单体(钢针停留在蓄电池中)

QC743新标准要求:

用6mm-o10mm的耐高温钢针(针尖的角度为60度，针的表面光洁、无锈蚀、氧化层及油污)、以20~30mm/s的速度，从垂直于蓄电池极板的方向，直至贯穿3个单体蓄电池(钢针停留在蓄电池中。试验后观察1h)

QC743 Old Standard Requirement:

With diameter o3mm-8mm high temperatureresistant steel needle, lOmmls~40mms speed, penetrate at least three storage battery monomer from vertical direction of store battery module pole board(steel needle stay in the storage battery)

QC743 New Standard Requirement:

With diameter 6mm-o10mm high temperature resistant steel needle(the angle of needle point is 60 degree, needle surface firish, no corrosion,oxidelayer and oilstin).20mmls-3Ommls speed,from vertical direoction of store battery module pole board, penetrate till hree monomer storage battery(steel needle stay in the storage battery, observe 1h after test)

标准依据 Standard Basis

GB/T 18332.2-2001电动道路车辆用金属氢化物镍蓄电池

QC/T 743电动汽车用锂离子蓄电池

QC/T 744电动汽车用金属氢化物镍蓄电池汽车动力电池的相关标准国际标准(ISOIIECISAE/JEVA/CEN等)、国际标准协会及"863计划"电动汽车重大专项相关测试规范

QB/T2947.3-2008电动自行车用蓄电池及充电器第3部分

DBI2/T246-2005电动自行车锂电池测试标准

GB 19521.11-2005锂电池组危险货物危险特性检验安全规范

GB/T31485-2015电动汽车用动力蓄电池安全要求及试验方法

GB/T31486-2015电动汽车用动力蓄电池电性能要求及试验方法

GB/T31467.3-2015电动汽车用锂离子动力蓄电池包和系统测试规程

GB/T 18332.2-2001 Nickle metal hydride storage battery for electric road vehicle

QC/T743 Lithium ion storage battery for electric vehicle

QC/T744Vehicle power batlery revelant international standards of nickle metal hydride storage battery for electric vehicle(SOVIECISAEUJEVACENetc).international standard association and "863 plan" electric vehicle major specific revelant test specification

QB/T2947.3-2008 Part 3 storage and charger for electric bicycle

DB12/T246-2005 Electric vehicle lithium battery test standard

GB 19521.11-2005Lithium battery pack dangerous goods dangerous property inspection safety specification

GB/T31485-2015 Power storage battery safety requirement and test method for electric vehicle

GB/T31486-2015 Power storage battery safety requirement and test method for electric vehicle

GB/T31467.3-2015Lithium ion power storage battery pack and system test procedure for electric vehicle

产品规格Product specifications

设备型号Equipment model	测试空间Test space(mm)	设备外形尺寸Machine External Dimension
RL-DZC-2T	200×200x200	W750xD650xH1800mm
RL-DZC-5T	600x600x600	W1000xD900xH2200mm
RL-DZC-9002D	800x800×800	W3000xD1200xH1300mm
RL-DzC-9002T	1000x1000x1000	W3300xD150OxH1500mm

辅助功能 Accessibility Function	电压、温度采集、视频监控系统、灭火系统、安全防爆系统、烟雾排放系统、烟雾过滤系统 Voltage,Temperature acquisition,Camera monitoring system,Sprinkler system, Safety explosion proof system,Smog emission system, Smog filter system
针刺速度Nail Penetrating Speed	0~80mm/min（可调），可按要求定制到200mm/min 0~80mm/min (Adjustable )，Can customize to 200mm/min according to requirement
测试空间(mm)Test Space	200x200x200mm、500x500x500mm、800x800x800mm、1000x1000x1000mm(可按要求定制) Can customize according to requirement
外形尺寸External Dimension	依实际设计为准Subject to actual design

选

配

指

标

电压选择Voltage Select	0-10V,0-100V,0-1000v
温度采集范围Temperature Acquisition Range	0~1200°℃
电压、温度精度Accuracy of voltage and temperature	±1%FS
电压分辨率Voltage Resolution	1mv
温度分辨率Temperature Resolution	0.1C

主

要

技

术

指

标

速度Speed	0~80mm/min（可调），可按要求定制到200mm/min 0~80mm/min ( Adjustable ) , can customize to 200mm/min according to requirement
针刺行程Nail Penetrating Stroke	0~1000mm范围内可选0~1000mm range optional
结构 Structure	立式、卧式(可根据实际尺寸选择)Vertical/Horizontal type(choose according to actual dimension)
耐高温钢针规格High Temperature Resistant Steel Needle Specification	直径中3mm~$8mm/Diameter $3mm~8mm
针刺方式Nail Penetrating Method	横向、纵向Landscape orientation,Portrait
针刺变形量Nail Penetrating Deformation Amount	无（如需要有则可选电脑控制）No (if need,please choose computer control type)
针刺保持时间Nail Penetrating Holding Time	0~99小时99分99秒/0~99 Hour 99 Minute 99 Second
驱动方式 Driving Method	液压Hydraulic
针刺速度精度Accuracy of Nail Penetrating Speed	±0.1mm/s
力量精度Force Accuracy	±1%

结

构

箱体Chamber Body	立式或卧式结构与控制部分分开Vertical/ Horizontal type,apart with control part
通讯 Communication	无（如需要有则可选电脑控制）No (if need,please choose computer control type)
耐高温钢针 High Temperature Resistant Steel Needle	直径中3mm~$8mm,可按要求定制Diameter o3mm~8mm,can customize by requirement
数据采集模块Data Acquisition Module	独立远程采集隔离，多路电压、温度、电流采集通道、确保数据无误Independent remote acquisition and isolation,multiplex voltage, temperature, current acquisition channel, ensure data correct(optional)
通道数量标配Channel Quantity Standard Configuration	2通道、4通道、8通道，多种数据采集系统（选配）2channel,4channel,8 channel,multiple data acquisition system(optional)
摄像监控系统 Camera Monitoring System	测试区域装配高清摄像监控系统，并可远程控制，具有防爆功能（选配）Test area install high definition video monitoring system,can remote control, explosion proof function(optional)

标准配置 Standard Configuration	针刺主机1套,控制柜1套，直径v3mm~u8mm耐高温钢针1套Nail penetrating main body one set,control cabinet one set,diameter u3mm~u8mm high temperature resistant steel needle one set
测试夹具Test Clamp	特定制作，根据样品实际使用条件而定Specific production,customize by sample actual usage condition
电源电压Power Supply	AC380V 50HZ三相五线制AC380V 50HZ three phases five wires
使用环境 Usage Environment	0°C~45°℃