PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 无线通讯 机箱机柜
南通德鑫数控机床有限公司
南通德鑫数控机床有限公司
DX08（立式） DX08-1（立式）DX08-2（卧式）型活塞环湿式喷砂机床
用途及特点
该机床适用于活塞环铬前处理，它集目前各种活塞环专用喷砂机之优点，以磨液泵及压缩空气为动力，通过喷枪将贮料箱中的磨液、磨料以高速喷射到工件表面。镀前经喷砂处理，对镀层与基体的结合力起着关键作用。能去除轻微毛刺，减少工件镀前酸碱处理。使镀前表面处于良好状态。镀后喷砂处理表面产生均匀与密布的细小凹坑，起着储油的初期磨合作用。并能去除微小的铬瘤，强化零件表面。加工环径可根据客户要求来定制。DX08 型全部为不锈钢材料制作。
USES and features
DX08 (vertical) (vertical) DX08 DX08-1-2 (horizontal) piston ring wet sａnd blasting machine.Before the machine is suitable for piston ring chromium processing, it combines the current with the advantages of all kinds of piston ring is special sａnd blasting machine, grinding fluid pumps and compressed air as the power, through the spray gun from the storage tank grinding fluid, abrasive jet to the surface at high speed. By sandblasting treatment before plating, the adhesion strength of the coating and the magnesium substrate to play a key role. Can remove a slight burr and reduce workpiece acid-base treatment before plating. Surface in good condition before plating. Sandblasting processing after plating surface evenly and with tiny pits, storage in the early effect. Chromium and can remove tiny tumor, strengthen the surface of parts. Processing the ring diameter can be customized according to customer's requirement. All DX08 type for the production of stainless steel materials.
| 型号 model | DX08/DX08-1 | DX08-2 |
| 加工活塞环直径范围 Machining piston ring diameter range | Φ 30mm- Φ 280mm | Φ 30mm- Φ 220mm |
| 喷射加工长度（双喷嘴） Jet machining (double nozzle length) | 800mm | 760mm |
| 工件转数 Artifacts of revolution | 36 转/ 分（可调） 36 turn / points（adjustable） | 36 转/ 分 36 turn / points |
| 喷枪移动速度 Gun movement speed | 280mm/min | 325mm/min |
| 磨料泵电机功率 Abrasive pump motor power | 3KW | 3KW |
| 机床外形尺寸 Machine tool shape dimension | 长×宽×高≈1200mm×1200mm×1980mm Long * wide * high≈1200mm×1200mm×1980mm | 1190mm×1190mm×1650mm |
| 机床重量（净重 ） Machine weight (net weight) | 980Kg | 750Kg |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
