行业产品

  • 行业产品

创为精密材料股份有限公司


当前位置:创为精密材料股份有限公司>>4线>>AMT98439 电阻式触摸屏*

AMT98439 电阻式触摸屏*

返回列表页
参  考  价面议
具体成交价以合同协议为准

产品型号98439

品       牌

厂商性质其他

所  在  地广州市

更新时间:2017-07-24 10:08:01浏览次数:658次

联系我时,请告知来自 智能制造网


    暂无信息

经营模式:其他

商铺产品:3条

所在地区:广东

联系人:程江域

产品简介

10.4"工业级电阻式触摸屏
AMT库存品*,原价RMB210未税),*RMB100(未税),数量1400片,预购从速

详细介绍

Apex Material Technology Corp.
創為精密材料股份有限公司
 
AMT  PRODUCT  STANDARD
Doc No:  AS-98439-B1  Rev:1.0
 Released:
  Mar.27,2006
 Title:   SPECIFICATIONS OF ANALOG RESISTIVE
 PET-ON-GLASS TOUCH SCREEN 
 Part Number:98439  Rev:B   Page. 1 of 7
 
Analog PET-On-Glass Touch Screen Specification
Manufacture: Apex Material Technology Corp.
Part No.:98439  Rev:B                                                               
 
1. Mechanical Dimensions and Construction
1.1  General: Analog Resistive touch screen is laminated by ITO PET to ITO glass.
1.2  Construction :
 
Item Description Material Remarks
1
ITO PET 
(Top layer)
0.188mm ITO PET
Film
Anti-Glare coating
Surface hardness: 3H
Resistance:300~600Ω/□
 
2
ITO Patterned Glass
(Bottom layer) 
1.8mm ITO Glass  Resistance: 400~600Ω/□
3 Tail Base Polyimide Separated Tail
4 Tail Coverlay Polyimide 
5 Conductor Copper 
6 Top layer circuit Silver ink 
7 Bottom layer circuit Silver ink 
8 Layer to layer contacted Silver ink 
9 Dot spacer UV ink 
10 Isolation Layer Isolation Adhesive 
11 Stiffener PET Film 
12 Glue UV Glue 
Touch screen side view:
 Apex Material Technology Corp.
創為精密材料股份有限公司
 
AMT   PRODUCT  STANDARD
Doc No:  AS-98439-B1  Rev:1.0
 Released:
  Mar.27,2006
 Title:   SPECIFICATIONS OF ANALOG RESISTIVE
 PET-ON-GLASS TOUCH SCREEN 
 Part Number:98439  Rev:B   Page. 2 of 7
 
1.3  Input Method and Activation Force
Input Method Average Activation Force
1.6mm dia. Delrin stylus 0.10~0.70N
16mm dia. Silicon "finger" 0.10~0.80N
 
2. Typical Optical Characteristics
  2.1  Visible Light Transmission: >80%
  2.2  Haze:<13%
 
3. Electrical Specifications
3.1  Operating Voltage: 5.5V or less
3.2  Contact current: 20mA (maximum)
3.3  Circuit close resistance: X :350~900Ω
Y : 200~700Ω
3.4  Circuit open resistance: > 10MΩ at 25VDC
3.5  Contact bounce: < 10ms
3.6  Linear Test : <1.5 % 
3.7  Capacitance:100nF(maximum)
 
4. Linearity
  4.1  Linear Test Specification
       Direction X: <1.5 %
       Direction Y: <1.5 % 
 
4.2  Line Test Circuit for Y Coordinate
Add 5V between Y1 and Y2 touch the point C0R0 to C9R9 separay, and
measure the voltage from X1 as the following drawing. Apex Material Technology Corp.
創為精密材料股份有限公司
 
AMT   PRODUCT  STANDARD
Doc No:  AS-98439-B1  Rev:1.0
 Released:
  Mar.27,2006
 Title:   SPECIFICATIONS OF ANALOG RESISTIVE
 PET-ON-GLASS TOUCH SCREEN 
 Part Number:98439  Rev:B   Page. 3 of 7
 
 
4.3  Calculate Linearity : For the First Row0
R0avg = ( VC0 + VC1 + VC2 +- - - - - - - + VC9) ÷ 10
     R0max = The maximum voltage in Row 0
     R0min = The minimum voltage in Row 0
     R0 linear1 = ⏐ R0 max – R0 avg. ⏐ ÷ R0 avg. ∗ *
     R0 linear2 = ⏐ R0 min – R0 avg. ⏐ ÷ R0 avg. ∗ *
     R0 linear = max (R0 linear1, R0 linear2)
 
4.4  For X Coordinate Test 
Add 5 voltage between X1 and X2 touch the point C0R0 to C9R9
separay and measure the voltage from Y1 as the above drawing
   Apex Material Technology Corp.
創為精密材料股份有限公司
 
AMT  PRODUCT  STANDARD
Doc No:  AS-98439-B1  Rev:1.0
 Released:
  Mar.27,2006
 Title:   SPECIFICATIONS OF ANALOG RESISTIVE
 PET-ON-GLASS TOUCH SCREEN 
 Part Number:98439  Rev:B   Page. 4 of 7
 
4.5  Calculate Linearity : For the First Column0
C0avg = ( VR0 + VR1 + VR2 +- - - - - - - + VR9 ) ÷ 10
C0max = The maximum voltage in Column 0 
C0min = The minimum voltage in Column 0
   C0 linear1 = ⏐ C0 max – C0 avg. ⏐ ÷ C0 avg. ∗ *
   C0 linear2 = ⏐ C0 min – C0 avg. ⏐ ÷ C0 avg. ∗ *
   C0 linear = max ( C0 linear1 ,C0 linear2 )
 
5. Environment Specification
  5.1  Operating Temperature  -10° C  ~  + 60° C  
Humidity less than 90% RH
  5.2  Storage Temperature      - 20° C  ~  + 80° C   
              at Ambient Humidity
 
6. Reliability Test
 
6.1 Exposure to high temperature
Touch panel is put into a test machine at the condition of 80℃ for 120 hours. 
Then it is left at the room temperature for 24 hours or more. The measurement
must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6 Apex Material Technology Corp.
創為精密材料股份有限公司
 
AMT  PRODUCT  STANDARD
Doc No:  AS-98439-B1  Rev:1.0
 Released:
  Mar.27,2006
 Title:   SPECIFICATIONS OF ANALOG RESISTIVE
 PET-ON-GLASS TOUCH SCREEN 
 Part Number:98439  Rev:B   Page. 5 of 7
 
6.2 Exposure to low temperature
Touch panel is put into a test machine at the condition of -20℃ for 120
hours. Then it is left at the room temperature for 24 hours or more. The
measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
 
6.3 Exposure to constant temperature and humidity
Touch panel is put into a test machine at the condition of 60℃, 90%RH for
120 hours. Then it is left at the room temperature for 24 hours or more. The
measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
 
6.4 Thermal Shock
Touch panel is put into a test machine at the condition of -20℃ for 30
minutes, and then 80℃ for 30 minutes. The process is repeated by 10 cycles. 
Then it is left at the room temperature for 24 hours or more.  The
measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6 Apex Material Technology Corp.
創為精密材料股份有限公司
 
AMT  PRODUCT  STANDARD
Doc No:  AS-98439-B1  Rev:1.0
 Released:
  Mar.27,2006
 Title:   SPECIFICATIONS OF ANALOG RESISTIVE
 PET-ON-GLASS TOUCH SCREEN 
 Part Number:98439  Rev:B   Page. 6 of 7
 
7. Durability test:
  
7.1 Finger touches
Touch panel is hit 10 millions times with a silicone rubber of R8 finger, hitting
rate is by 250g at 2 times per second. The measurement must satisfy the
following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
 
7.2 Stylus writing 
Touch panel is drawn by R0.8 Derlin stylus pen, at 200g forces, repeat one inch
by 100K times. The measurement must satisfy the following:
- Circuit close resistance: as Sec. 3.3
- Circuit open resistance: as Sec. 3.4
- Contact bounce: as Sec. 3.5
- Linearity test: as Sec. 3.6
 
 
8. Optical Performance
 8.1  Optical inspection method and optical defect standards refer to AMT
document. A001updated version ;〝Touch Screen Optical Quality Standard.〞 
 
 8.2  Outside to Viewing Area : any optical defected in this area need to be           
ignored if no effected to touch screen function. Apex Material Technology Corp.
創為精密材料股份有限公司
 
AMT  PRODUCT  STANDARD
Doc No:  AS-98439-B1  Rev:1.0
 Released:
  Mar.27,2006
 Title:   SPECIFICATIONS OF ANALOG RESISTIVE
 PET-ON-GLASS TOUCH SCREEN 
 Part Number:98439  Rev:B   Page. 7 of 7
 
8.3  Silver Bus Pattern defect : Voids in traces to be less than 50% of the trace
width.
      8.3.1 Silver Bus Pattern gap: >0.1mm
8.3.2 Silver Bus and Active area gap: No silver ink may project beyond the
viewing area.
     
9. Others
9.1 Always store the touch screen in its original shipping container under 
normal conditions(20~25℃  ≦65%RH)
9.2 This part is ROHS compliant. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

智能制造网 设计制作,未经允许翻录必究 .      Copyright(C) 2021 https://www.gkzhan.com,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,智能制造网对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~