ZAPI 叉车配件-广州市朝德机电设备有限公司

www.tsthk.com 传真：郑铁晓泰仕达工业

自动化业代理 ZAPI叉车配件

H0 controller
This equipment is suitable for applications on pallet trucks, small and medium electric vehicles in general, with D.C. series excited motors from 0.6 kW to 2.2 kW. General features: MOSFET technology, microprocessor logic, faults memory, digital programming via console.

Technical details: Supply voltage: 24 ÷ 36V Maximum current: 180 ÷ 230A High Frequency: 16 kHz Internal hour meter Internal Battery Discharge Indicator （BDI） Serial link Complies with European CE Standards Protection IP44 Dimensions: 100 X 185 X 74 mm

H1 controller
This equipment is suitable for pallet trucks, small and medium electric vehicles in general, with D.C. series excited motors from 1.5 kW to 3.5 kW. General features: MOSFET technology, microprocessor logic, faults memory, digital programming via console.

Technical details: Supply voltage: 24 ÷ 48V Maximum current: 150 ÷ 300A High Frequency: 16 kHz Internal hour meter Internal Battery Discharge Indicator （BDI） Serial link Complies with European CE Standards Protection IP54 Dimensions: 150 X 167 X 85 mm

H2 controller
This equipment is suitable for operations on medium and large capacity trucks, such as counter balance, order picker, reach and 3 wheel trucks, with D.C. series wound motors from 2 kW to 20 kW. General features: MOSFET technology, microprocessor logic, faults memory, digital programming via console, regenerative braking （traction control）.

Technical details: Supply voltage: 24 ÷ 120V Maximum current: 600A High Frequency: 16 kHz Internal hour meter Internal Battery Discharge Indicator （BDI） Serial link Complies with European CE Standards Protection IP54 Dimensions: 150 X 374 X 85 mm

H3 controller
This equipment is suitable for operations on medium and large capacity electric vehicles, such as counter balance or trilateral, big tractor, with D.C. series wound motors from 10 kW to 30 kW. General features: MOSFET technology, microprocessor logic, faults memory, digital programming via console, regenerative braking （traction control）.

Technical details: Supply voltage: 36 ÷ 120V Maximum current: （24 ÷ 96V） 800 ÷ 1000A （120V） 800A High Frequency: 16 kHz Internal hour meter Internal Battery Discharge Indicator （BDI） Serial link Complies with European CE Standards Protection IP44 Dimensions: 280 X 380 X 120 mm

Combi c1 controller
Two independent controls for D.C. series excited motors are fitted in the same package: one for traction motor with regenerative braking and one for pump motor. This equipment is suitable for application in medium and large capacity trucks, such as counter balance, order picker, reach and 3 wheel trucks. General features: MOSFET technology, microprocessor logic, faults memory, digital programming via console, regenerative braking.

Technical details: Supply voltage: 24 ÷ 48V Maximum current: 350 + 350A High Frequency: 16 kHz Internal hour meter Internal Battery Discharge Indicator （BDI） Serial link Complies with European CE Standards Protection IP54 Dimensions: 150 X 457 X 87 mm

Eps - ac
Steer by wire controller for AC steering motors （EPS-AC）. Zapi started development of DC Electronic Power Steering systems for lift truck in 1992. The EPS-AC system reflects Zapi's experience in the initial DC products together with state of the art asynchronous technology. The EPS-AC is suitable for asynchronous steering motors between 200W and 1kW.

Technical details: Nominal voltage: 24,36,48,72, 80V Maximum current （1'）: 70A （50A@72-80V） Dimensions: 150x210x74 mm RS232 Serial Link Can-Bus Dual Microprocessors Flash Memory Eeprom Internal hour meter Environmental protection: IP64 Complies with European CE Standards

EPS-DC EPS-AC WG EPS-DC WG

Zgf frequency generator

Smart antenna

Combiac-0 & combiac-0 pw controller
The COMBIAC-0 controller is suitable for pedestrian, small stacker trucks, and order pickers fitted with asynchronous motors up to 2,5 kW, and DC series pump motor up to 5 kW.

Technical details: POWER SECTION Power supply: 24,36,48 volt Maximum current: COMBIAC-0 24V: 220 Arms（2’） + 270Adc pump COMBIAC-0 36-48V: 180 Arms（2’） + 270Adc pump COMBIAC-0 PW 24V: 300 Arms（2’） + 270Adc pump COMBIAC-0 PW 36-48V: 240 Arms（2’） + 270Adc pump Ambient Temperature range: -40° +40°C Maximum heatsink temperature: 85°C （starts to reduce current） MECHANICS Dimensions: 150x200x71 mm Connector: Ampseal Protection: IP65 Available with Al base plate or finned heatsink I/O 5 Digital inputs （input range - Batt÷ +Batt ） 1 Analog inputs （input range 0 ÷ 12 V ） 1 Incremental encoder port 6 Outputs driving to - BATT: . LC driver 1,5 A continuous . EB driver 1,5 A continuous . 4 EVS driver 1,5 A continuos 1 Output driving to –BATT: proportional EV, current control OTHER FEATURES 16 bits microcontrollers Flash memory Can interface Serial link

COMBIAC0 COMBIACO EPS-TA

Eps ta （torque assisted）
This compact and cost effective Torque assisted EPS is suitable for trucks fitted with tiller. Driven by EPS TA, the PM motor provides a steering torque additional to the applied one thus simplyfying the truck use. EPS TA complies with Cathegory III （EN954-1 Standard）

Technical details: Nominal voltage: 24V Maximum current （2'）: 50A Dimension: 120x150x55 mm Can-Bus Dual Microprocessors, both CAN Bus connected Flash memory Environmental Protection: IP54 or IP65 （with Ampseal connector） Complies with European CE Standards

Electronic power steering

The electronic power steering unit provides reach trucks, order pickers, man-up VNA trucks and similar vehicles. ZAPI offers the system controller, tacho-generator and the motor/gearbox combination for a complete, integrated solution. The electronic power steering with wire guidance controls the steering for vehicles operating in narrow aisles. Vehicle mounted sensors （Smart antenna） detect the magnetic field from a cable embedded in the floor, and guide the vehicle, without steering input from the operator. ZAPI offers a system that will operate in a wide range of current and frequencies in the cable （from 30mA AC up to 100 mA AC at frequencies of 5.2, 6.25, 7, 9.1, 10 kHz）.".Available in steer by wire or torque assisted version