1 x 9~36VDC input with ignition and 38W typical power consumption 1 x 12V/4A DC output, SMBus 1 x DB26 LVDS interface with 12V and USB2.0 1 x DB9 RS-232 (default) or OBDII (option) 1 x DB9 RS-422/ 485 1 x DB9 female connector for 4 x DI and 4 x DO
(Digital Input)
Input Voltage (Internal Type): 5VDC TTL (default)
Input Voltage (Source Type): 0~30 VDC
(Digital Output)
Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
Digital Output (Source Type): 0~30VDC, max current: 250mA 10-Pin terminal block for 8 x DI and 8 x DO
Isolation: 5K Vrms
(Isoated Digital Input)
Input Voltage (Internal Type): 5VDC TTL (default)
Input Voltage (Source Type): 0~30 VDC
(Isoated Digital Output)
Digital Output (Sink Type): 5VDCTTL (default), max current: 20mA
Digital Output (Source Type): 0~30VDC, max current: 250mA 5-Pin terminal block for 3x analog input
Isolation: 2K Vrms
2 x isolated analog voltage input 12VDC (Max.)
1 x isolated analog current input 10A (Max.) 2 x USB 2.0 host type A connector 2 x RJ45 with LEDs for 10/ 100/ 1000Mbps Ethernet 1 x Line-out, 1 x Mic-in 1 x DB9 male connector for 1 x OBDII (default) or 2 x OBDII (option) 1 x SMA-type GPS antenna connector 4 x Antenna hole reserved for SMA-type antenna connector (WWAN/ WLAN/ BT) | 
