General | Cooling System: Fanless Enclosure: Plastic PC + ABS Mounting: Support VESA 75, stａnd mounting Four SMA Type antenna connectors of BT/Wi-Fi /WWAN/GPS Power Input: 9 ~ 36VDC input with Ignition Power Consumption: 15W Ingress Protection: Front panel IP54 Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9") Weight: TBD |
LCD Panel | 7-inch TFT LCD Panel with LED Backlight 800 x 480 pixels (WVGA) Brightness: 400 cd/m² (typical) Contrast ratio: 600:1 (typical) |
Touch Screen Sensor | 4-wire resistant touch Anti-glare coating surface Transmission rate: 78 ± 3% |
CPU & Chipset | On-board DDR3 512MB |
Expandable Storage | 1 x Micro SDHC Slot (Bundle with 8GB) |
Expansion | 1 x Pin Head for WLAN option1 x mini-PCIe socket ((USB + UART) for WWAN option)OBD option and support protocols
- ISO 15765-4, ISO 14230-4, ISO 9141-2, SAE J1850
- ISO 15765, ISO 11898
- SAE J1939Battery module option |
I/O Interface-Front | F1 ~ F5 functions keyLight SensorInternal Mic-in2 x Built-in 2W speakers3 x LED indicators (Power mode, Storage and WWAN status) |
I/O Interface-Lateral | Right side
- 1 x Micro SD card socket
- 1 x SIM card socket
- 1 x USB 2.0 host type A connector
- 1 x Mic-in, Line-outLeft side
- 1 x Power button
- 1 x System reset button
- Volume up/down or Brightness up/dow |
I/O Interface-Rear | 1 x 5-pin Circular connector for Power/Ignition input1 x RJ45 for LAN1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)1 x DB9 (Male) for
- RX/TX or RS-485
- 2 x CAN Bus 2.01 x DB15 (Female) for
- GPS dead reckoning interface (optional)
- 3 x GPO, 3 x GPI |
Communication Module | 1 x On board GPS module1 x WLAN or Bluetooth module for optional1 x WWAN module for optional |
Power Management | Selectable boot-up & shut-down voltage for low power protection HW design ready for 8-level delay time on/off at user's self configuration Power on/off ignition, software detectable |
Operating System | Linux Ubuntu (kernel V3.2.0) |
Environment | Operating temperatures: Ambient with air -20°C to 60°C Storage temperatures: -30°C to 80°CRelative humidity: 10% to 90% (non-condensing)Vibration (random): 3g @5 ~ 500Hz Vibration
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 Shock
Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g |
Power Design & Protection | Load dump and inductive load protection Cold cranking protection Transient voltage protection Electrostatic discharge protection |
Standards/Certifications | EMC
- CE, FCC class BPower
- SAE J1113
- SAE J1455
- ISO 7637-2Safety
- EN 60950-1 LVD |
