前置I/O界面 | 1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication) 2 x SIM card socket (selectable) 1 x System reset button 1 x USB 2.0 host type A connector 1 x Power button1 x CFast with protection cover 1 x Accessible 2.5" SATA II SSD tray 2 x DB9 isolation RS-422/ 485, Isolation: 5K Vrms 3 x DB9 isolation RS-232, Isolation: 5K Vrms 4 x LED’s for power, storage, WLAN/ WWAN and GPIO G sensor |
后置I/O界面 | 1 x 9~36VDC input with ignition and 29W typical power consumption 1 x 12V/4A DC output, SMBus 1 x DB26 LVDS interface with 12V and USB2.0 1 x DB9 RS-232 (default) or OBDII (option) 1 x DB9 RS-422/ 4851 x DB9 female connector for 4 x DI and 4 x DO
(Digital Input)
Input Voltage (Internal Type): 5VDC TTL (default)
Input Voltage (Source Type): 0~30 VDC
(Digital Output)
Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
Digital Output (Source Type): 0~30VDC, max current: 250mA10-Pin terminal block for 8 x DI and 8 x DO
Isolation: 5K Vrms
(Isolated Digital Input)
Input Voltage (Internal Type): 5VDC TTL (default)
Input Voltage (Source Type): 0~30 VDC
(Isolated Digital Output)
Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
Digital Output (Source Type): 0~30VDC, max current: 250mA 5-Pin terminal block for 3x analog input
Isolation: 2K Vrms
2 x isolated analog voltage input 12VDC (Max.)
1 x isolated analog current input 10A (Max.) 2 x USB 2.0 host type A connector 2 x RJ45 with LEDs for 10/ 100/ 1000Mbps Ethernet 1 x Line-out, 1 x Mic-in |
运行环境 | Operating temperatures:
-30°C to 55°C (w/ industrial SSD) with air flow
-20°C to 45°C (w/ commercial HDD) with air flow Storage temperatures: -35°C to 85°C elative humidity: 10% to 90% (non-condensing) Vibration (random): 1g@5~500 Hz (in operation, SSD)Vibration (SSD):
Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test Shock (SSD):
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g |
