北京北广精仪仪器设备有限公司郑重声明：* ，如有需要：请百度搜索（北京北广精仪仪器设备有限公司）
海绵泡沫疲劳压陷试验机 产品型号：HMPL-2000
一、制造标准：（GB/T 18941 ISO 3385）《 软质泡沫聚合材料.用定载冲击法测定疲劳》
Simple introduction
Sponge reciprocating impact fatigue testing machine - manufacturing standards: （ GB/T 18941 ISO 3385 ） " flexible cellular polymeric materials - Method for the determination of fatigue by constant-load pounding "
二、主要适用范围及功能：
主要用于泡沫聚合材料的往复冲击压缩疲劳试验，测定试样的厚度减少值和硬度降低值（残余变形率），并由此可以了解材料的动态疲劳特性。本仪器同时满足我国汽车工业标准QCT56-93《汽车座椅衬垫材料性能试验方法》和日本汽车工业标准JASOB408-84等国外标准的要求。
本仪器采用微处理器进行控制，自动设定加载负荷大小及往复压缩次数，当负荷小于或大于设定负荷时能够自动调节，保持在设定的负荷数值下进行试验。液晶屏显示中文操作，本仪器具有使用操作方便，性能可靠，测量精度高等特点。
Sponge reciprocating impact fatigue testing machine details
Sponge foam reciprocating impact testing machine
Sponge reciprocating impact fatigue testing machine sponge reciprocating impact fatigue testing machine
Manufacturing standards: （ GB/T 18941 ISO 3385 ） " flexible cellular polymeric materials - Method for the determination of fatigue by constant-load pounding "
Sponge foam reciprocating impact testing machine model: HMPL-2000: sponge foam fatigue impact test machine, sponge foam reciprocating fatigue impact testing machine use: sponge foam fatigue deformation
三、主要技术参数：
1、zui大加载能力：0-2000N.（大小可设定）
2、往复压缩次数:20-120次/分.（次数可设定）
3、往复压缩行程:zui大100mm.
4、压盘直径：φ250 mm.
A sponge, reciprocating impact fatigue testing machine is mainly applicable scope and function:
Mainly used for cellular polymeric materials of the reciprocating impact compression test, determination of specimen thickness reduction value and the lower hardness value （ residual deformation rate）, and thus can understand the dynamic fatigue characteristics of materials. The apparatus also meet the needs of China's automotive industry standard QCT56-93 " car seat liner material performance test methods " and the Japanese auto industry standard JASOB408-84 and other foreign standards.
四、主要配置
1、测试主机一台
2、轮辐式高精度传感器一支
3、主机测试夹具一套
4、调速电机系统一套
5、电气控制箱一台
6、产品说明书一份
7、产品合格证一份
8、产品装箱单一份
The instrument adopts the microprocessor control, automatic setting load size and reciprocating compression times, when the load is less than or greater than a predetermined load can be automatically adjusted, is maintained in the set load numerical tests were conducted under. LCD screen display Chinese operation, the device has the advantages of convenient operation, reliable performance, high measure precision.
Two, sponge reciprocating impact fatigue testing machine main technical parameters:
In 1, the maximum loading capacity: 0-2000N. （ size can be set）
N 2, reciprocating compression frequency: 20-120 / min （ number can be set）.
N 3, reciprocating compression stroke: maximum 100mm.
N: 4, plate diameterφ 250 mm.
Sponge reciprocating impact fatigue testing machine main configuration
In 1, the test host machine
In 2, a spoke type high precision sensor
3, a host of test fixture
In 4, a motor speed control system
5, electrical control box
6, product instruction booklet
7, product qualification certificate a
8, product packing list
北广公司其他海绵泡沫检测仪器：
海绵泡沫压陷硬度测定仪-HMYX-2000
海绵泡沫拉伸强度测定仪-HMLS-1000
海绵泡沫定载冲击测定仪-HMPL-2000
海绵泡沫落球回弹测定仪-HMLQ-500
海绵泡沫压缩*变形测定仪-HMYS-200
海绵泡沫切割机 HMQG-100
anton company other sponge foam for detection equipment:
Sponge foam indentation hardness tester -HMYX-2000
Sponge foam tensile strength tester -HMLS-1000
Sponge foam constant-load pounding tester -HMPL-2000
Sponge foam ball rebound tester -HMLQ-500
Sponge foam compression tester -HMYS-200
Sponge foam cutting machine HMQG-100
智能制造网