水平垂直法阻燃性能测定仪是由北京北广精仪仪器设备有限公司（北京生产仪器设备厂家）按照国标GB1210-92 （符合：GB/T2408-1996、GB5455-85、GB2408-80、GB4609-84）精密生产，仪器质量好，价格比经销商便宜很多，无可挑剔。

产品名称有：水平垂直法阻燃性能测定仪，水平垂直燃烧测试仪，塑料水平垂直燃烧性能试验仪，水平垂直燃烧性能试验仪

 一、本仪器技术指标：

1、生灯施加火焰时间有10s、12s、30s可选择，精度±0.2s，倒记时，撤退报警提醒。
2、本生灯内径：9.5mm±0.3mm
3、本生灯可在0-450范围内倾斜
4、本生灯蓝色火焰高度：15mm-45mm可任意调节，配有火焰高度标尺
5、试样夹zui大夹指厚度：≤13mm
6、试样夹垂直方向调整距离：≤100mm   
7、试样夹水平方向调整距离：≤70mm
8、水平试样夹可900收放
9、可燃气源：甲烷、天然气、液化石油气、煤气

 二、塑料试样指标：

1、 电子点火，点火距试样距离：150mm，蓝色火焰高度：20mm±2mm；
2、 燃烧试验空间大于0.5立方米；
3、 燃烧器自动定时定位；
4、 施焰时间：0～99.99秒任意设置；
5、 有焰燃烧，无焰燃烧时间均自动记录，数码显示；
6、 火焰高度可调整，并可配置火焰温度测量装置；
7、 配有可燃气体泄露报警装置；
8、 试样尺寸：长125mm±5mm；宽13.0mm±0.3mm；厚3.0mm±0.2mm；

 三：技术标准：

本试验仪适用于检验和评定塑料材料的燃烧特性，是根据IEC60695-11-4、IEC60695-11-10、IEC60695-11-3,IEC60695-11-20、IEC60695-11-2。美国 UL94 标准《设备和器具部件用塑料材料的可燃性试验》中规定的有关条款。采用积分式进气点火系统，燃烧延时仅0.1秒，确保气体的充分燃烧时间；黑色背景，多功能火焰量规，火焰调节工作变得简单；箱体全不锈钢，观察窗口大；进口高精度数显仪表，外形美观；集多项国内外同类产品的优点，性能稳定，操作方便。

 四、本仪器主要用途：

水平垂直燃烧试验仪主要针对 HB&V级（50W）和 5V级（500W）材料的可燃性进行定级评定。适用于照明设备、低压电器、家用电器、机床电器、电机、电动工具、电子仪器、电工仪表、电气连接件和辅件等电工电子产品及其组件部件的研究、生产和质检部门，也适用于绝缘材料、工程塑料或其它固体可燃材料行业。可供塑料工业、检验部门和科研单位使用。

水平垂直燃烧试验仪是根据IEC60695、GB5169等标准的相关条款要求而设计制造的,模拟电工电子产品周围发生着火时早期阶段火焰的影响，以便通过模拟技术评定着火危险程度，主要用于对塑料及其他非金属材料部件样品、固体材料和按ISO845的方法测定时视在密度不小于250kg/m'的泡沫塑料的相对燃烧特性进行水平、垂直可燃性试验。

水平垂直燃烧试验利用标准规定尺寸的本生灯和特定燃气源 （ 甲烷或丙烷 ） ，按一定的火焰高度和一定的施焰角度对呈水平或垂直状态的试品定时施燃，根据点燃、灼热燃烧的持续时间和燃烧长度等来评定其可燃性及着火危险性。

 五、本仪器工作原理：

将长方形条状试样的一端固定在水平或垂直夹具上，其另一端暴露于规定的试验火焰中。通过测量线性燃烧速率，评价试样的水平燃烧行为；通过测量其余焰和余辉时间、燃烧的范围和燃烧颗粒滴落情况，评价试样的垂直燃烧性能。

 六、只要术语：

1、余焰：引燃源移去后，在规定条件下材料的持续火焰。
2、余焰时间：余焰持续的时间。
3、余辉：在火焰终止后，或者没有产生火焰时，移去引燃源后，在规定的试验条件下，材料的持续辉光。
4、余辉时间：余辉持续的时间。

 关于本仪器的附加介绍：

什么是垂直燃烧法？（水平燃烧法）
定义：以一端被夹持的规定尺寸和形状的棒状试样处于水平位置且自由端暴露在规定气体火焰上的方式测定试样线性燃烧速率的试验方法。
应用学科：材料科学技术（一级学科）；高分子材料（二级学科）；高分子材料性能及其测试方法（二级学科）

注：北京北广精仪仪器设备有限公司其他自主生产*产品：（橡胶塑料系列）
电压击穿试验仪（GB1408），介电常数介质损耗测试仪（GB1409）,体积表面电阻率测试仪（GB1410），微机电子*试验机，维卡软化点温度测定仪，耐电弧试验仪，漏电起痕试验仪，水平垂直燃烧仪，塑料滑动摩擦磨损试验机，熔融指数仪（熔体流动速率测定仪），塑料球压痕硬度测试仪，低温脆性测定仪。

Flame retardant properties of horizontal and vertical determination instrument is composed of Beijing all precision instrument equipment Co., Ltd. （Beijing production equipment manufacturers） in accordance with the national standard GB1210-92 （with GB\/T2408-1996, GB5455-85, GB2408-80,: GB4609-84） precision production, quality is good, the price is much cheaper than a dealer, impeccable.

Product Name: instrument for measuring flame retardant properties of horizontal and vertical, horizontal and vertical burning tester, tester vertical combustion properties of plastics, tester vertical combustion performance level

Index, the instrument technology:

1, students apply flame lamp time 10s, 12s, 30s can choose, accuracy of ± 0.2S, countdown, evacuation alarm.

2, the Bunsen burner diameter: 9.5mm ± 0.3mm

3, the Bunsen burner tilting in the range of 0-450

4, the light blue flame height: 15mm-45mm can be arbitrary regulation, equipped with flame height scale

5, the sample holder maximum finger thickness: ≤ 13mm

6, the sample holder perpendicular to the direction of adjustment range: ≤ 100mm

7, the sample holder horizontal distance adjustment: ≤ 70mm

8, the level of the sample holder can be 900 and

9, flammable gas source: methane, natural gas, liquefied petroleum gas, gas

Two, the plastic sample index:

1, electronic ignition, ignition distance sample distance: 150mm, blue flame height: 20mm ± 2mm;

2, the combustion test space of more than 0.5 cubic meters;

3, the burner automatic timing and positioning;

4, the flame time: 0 ~ 99.99 seconds set arbitrarily;

5, flaming, flameless combustion time are recorded automatically, digital display;

6, the flame height can be adjusted, and configure a flame temperature measuring device;

7, with a combustible gas leakage alarm device;

8, the sample size: length 125mm, width 13.0mm ± 0.3mm ± 5mm; thickness; 3.0mm ± 0.2mm;

Three: technical standard:

The combustion characteristics of the testing instrument for testing and evaluation of plastic material, according to the IEC60695-11-4, IEC60695-11-10, IEC60695-11-3, IEC60695-11-20, IEC60695-11-2. The relevant provisions of the United States of America "UL94 standard parts in devices and appliances for flammability test" plastic material specified in the. The integral type air ignition system, the combustion delay for only 0.1 seconds, to ensure the full gas combustion time; a black background, multifunctional flame gauges, flame adjustment work is simple; the stainless steel, the observation window; imported high precision digital display meter, beautiful shape; advantages, set a number of domestic and foreign similar products stable performance, operation convenient.

The main purpose of this instrument, four:

Horizontal and vertical burning test apparatus mainly aimed at the HB&V level （50W） and 5V （500W） grading evaluation of flammable material. Suitable for the lighting equipment, low-voltage electrical appliances, household electrical appliances, electrical tools, electric motor, electric tools, electronic instruments, electrical instruments, electrical connectors and accessories and other electrical and electronic products and components of the research, production and quality inspection departments, is also applicable to insulation materials, engineering plastic or other solid combustible materials industry. For the plastics industry, inspection departments and scientific research units.

Horizontal and vertical burning tester is according to the relevant provisions of the IEC60695, GB5169 standard design and manufacturing requirements, effects of early stage of flame around the simulation of electrical and electronic products during a fire, so that the use of simulation technology assessment of fire hazard degree, is mainly used for plastics and other non-metallic materials, solid material and parts of samples were determined by the method of ISO845 apparent relative combustion characteristics of horizontal, vertical flammability test density of not less than 250kg\/m'foam.

Horizontal and vertical burning test using the standard size of the Bunsen burner and the specific gas source （methane or propane）, according to a certain height of flame and flame angle to the horizontal or vertical state of a sample application of combustion timing, according to the duration of ignition, combustion and burning hot length to assess their flammability and fire hazard.

Principle five, the instrument:

One end of a rectangular bar specimens will be fixed in a horizontal or vertical test fixture, and the other end is exposed to the flame to the provisions. By measuring the linear burning rate, combustion behavior evaluation sample level; by measuring its embers and afterglow time, burning and burning particles drop, vertical combustion performance evaluation of specimens.

Six, as long as the terms:

1, Yu Yan: ignition source is removed, the continuous flame materials specified conditions.

2, Yu Yan: afterflame time duration.

3, in the afterglow: flame after termination, or no flame, remove the ignition source, under defined test conditions, continuous glow material.

4, the afterglow time: afterglow duration.

Additional introduction about the instrument:

What is the vertical combustion method? （horizontal burning test）

Definition: in the end is clamped by the provisions of bar specimen size and shape in the determination of linear test method for burning rate in way of gas flame horizontal position and a free end exposure.

Application of disciplines: Materials Science and Technology （a subject）; polymer material （two subjects）; properties of polymer materials and test methods （two subjects）

Note: Beijing BBEF precision instrument equipment Co., Ltd. other independent production of hot-selling products: （rubber plastic series）

Voltage breakdown testing instrument （GB1408）, dielectric constant and dielectric loss tester （GB1409）, surface resistivity tester volume （GB1410）, the electronic universal testing machine, VEKA softening point tester temperature, arc resistance tester, tracking test instrument, horizontal and vertical burning tester, friction and wear testing machine, plastic sliding, melt index apparatus （melt flow rate tester）, plastic ball indentation hardness tester, low temperature brittleness tester.