ZY6030电线电缆扭转+卷绕试验机
Wire and cable twist + winding machine

符合GB/T4909.4-2009《裸电线试验方法.扭转试验》与GB/T4909.7-2009《裸电线试验方法.卷绕试验》标准要求。本机常用于

铝线、钢线、钢杆、钢芯铝绞线等电线电缆进行卷绕扭转试验是钢芯铝绞线生产厂商*的检测工具。
In line with the GB/T4909.4-2009 "bare wire test method. The torsion test with GB/T4909.7-2009 standard for 

bare wire test method. The winding test requirements. The machine used for aluminium wire, steel wire, steel 

bar, steel core aluminum stranded wire and other wire and cable winding torsion test is indispensable for 

steel core aluminum stranded wire manufacturers detection tools.

1、压线板工作宽度：200mm  
2、芯棒有效工作长度：70mm  
3、卷绕速度：1圈－70圈/min（可调）  
4、电线电缆卷绕扭转试验机芯棒范围：
φ1.24mm、φ2.25mm、φ2.75mm、φ3mm、  
Φ3.5mm、φ3.72mm、φ4.25mm、φ4.75mm、  
Φ6.75mm、φ11.0mm、φ12mm、Φ14.0mm、  
φ17.0mm、Φ19.0mm、  
5、卷绕范围：铝线：Ф3mm-6mm用芯棒，  
Ф3mm以下建议用手工卷绕,  
钢丝：Ф4mm以下  
6、扭转配重砝码：5×5Kg  
7、扭转计数范围：999999  
8、电机额定功率：0.185kw  
9、额定电压：220V、50HZ  
10、外形尺寸约：约1400×500×800mm  
1, pressing line plate work width: 200 mm
2, mandrel effective working length: 70 mm
3, winding speed: 1-70 times/min (adjustable)
4, wire and cable winding machine core rod torsion test range:
From 1.24 mm, 2.25 mm, 3 mm, phi phi is 2.75 mm,
Φ, phi is 3.72 mm, 3.5 mm from 4.25 mm, 4.75 mm,
Φ of 6.75 mm, 11.0 mm, phi 12 mm, 14.0 mm Φ,
Phi is 17.0 mm, 19.0 mm Φ,
5, winding scope: aluminum wire: Ф 3 mm - 6 mm with a core rod,
The following recommendations to use manual winding Ф 3 mm,
Steel wire: Ф below 4 mm
6, torsion balance weight: 5 * 5 kg
7, reverse counting range: 999999
8, the motor rated power: 0.185 kw
9, rated voltage 220 v, 50 hz
About 10, appearance size: 1400 * 500 * 500 mm

 
1、试样直径：铝线Ф1～6mm ，钢线Ф1～6mm
2、芯棒直径：Ф1.25～Ф16.00mm，≤Ф3mm建议用手工卷绕
3、主轴转速：≤8r/min
4、右轴头位移距离：≥40
5、总速比：可调
6、电机：功率0.75KW
7、转速：1500r/min
8、扭转计数范围:999999
9、扭转配重砝码：5×5Kg
10、外形尺寸约：810mm×400mm×1400mm
1, the sample diameter: aluminium wire Ф 1 ~ 6 mm, steel wire Ф 1 ~ 6 mm
2, mandrel diameter: 1.25 ~ 16.00 mm Ф Ф, Ф 3 mm or less advice winding by hand
3, spindle speed: 8 r/min or less
4, the right shaft head displacement distance: 40 or higher
5, total ratio: is adjustable
: 6, motor power 0.75 KW
7, rotational speed: 1500 r/min
8, reverse counting range: 999999
9, torsion balance weight: 5 * 5 kg
About 10, appearance size: 810 mm * 400 mm * 1400 mm

：东莞中诺（中国台湾）质检仪器设备有限公司
                   （转）815
                     （艾新华）