美国生产的倒角规,是一种精密仪器,适用于对倒角、中心钻或锥形孔顶端(主要)直径的测量。只需要将测压柱塞按入倒角或埋头孔内,即可即时读取刻度盘上的数据,刻度盘直径增量为.001"或.01mm、.02mm。
INSTANTLY MEASURE TOP DIAMETER OF TAPERED HOLES
The BARCOR CHAMFER GAGE is a precision instrument designed specifically to measure the top (major) diameter of a chamfer, countersink, center drill, or tapered hole. Merely press the spring loaded, conically ground, precision 3-blade Gaging Plunger into the chamfer or countersink and instantly read the dial in .001" or .01mm/.02mm diameter increments.
The CHAMFER GAGE is a direct reading gage. No Setting, Master (Standard) or look-up chart is required. To "Zero" the gage or check the setting, press the base of the gage against any flat ground surface and adjust the dial to read the "Set To" number stamped on the back.
The CHAMFER GAGE is available in two angular ranges: 0°-90° for angles of 90° or less, and 90° - 127° for angles greater than 90° but less than 127° Models for angles larger than 127° upon request. The standard BARCOR CHAMFER GAGE is furnished with a hardened Tool Steel Gaging Plunger. Optional Solid Carbide Gaging Plungers with a LIFETIME wear guarantee are also offered. Other options include .0001" reading Super CHAMFER GAGE, External Models, Micrometer
Models, HALF SIZE Models, Electronic Models with SPC capabilities, NIST (formerly NBS) traceable Setting Masters and Letters of Certification.
MODIFICATIONS OR SPECIALS ON REQUEST
IDEAL APPLICATIONS:
Chamfers/Countersinks
Hydraulic Fittings
Screw Machine Parts
Aircraft Components
Production Machining
Automotive Assembly
Quality Control/Gage Room
Model Shop & Prototype
Receiving Inspection
Valve Seats
Rivet Seats
Tube Flares
Piston Rings
Shaft Centers
Instruments
Stampings
Castings
Bushings
- BARCOR’s 320 Standard mechanical CHAMFER GAGE Models (Inch, Metric. O.D., Solid Carbide, Micrometer reading & Super .0001" reading) give you a diameter range of 0" to 8".
- BARCOR"s all-new Electronic CHAMFER GAGE has .0002"/.005mm resolution switchability
and SPC capability. To order, add suffix .SPC to standard Model No - For mechanical .0001" reading Super CHAMFER GAGE, add suffix -S to Model No.
- For CHAMFER MICROMETER Models, add suffix MK to Model No.
For Metric reading gages, add suffix -M to Model No. - Optional NIST (formerly NBS) traceable Setting Masters (Standards) are also available.
- Listed below are our most popular Models. Contact factory for complete full line Catalog.