ATK集团运用美国*的设计技术将ATK的专业负压排气扇与绿色环保的自然降温水濂机组科学合理地配置成为水濂蒸发式通风系统, 并运用电脑温度控制器来操控整套系统, 该系统集通风、换气、降温于一体,为用户创造清新、凉爽、舒适的室内工作环境,在为客户节省大量的使用成本同时有效提升生产效率,是现代工业厂房的降温通风设备*.
ATK水濂式蒸发冷却通风系统的主要优点:
The main advantages of the ATK ventilation system:
◆ 集通风、换气、降温于一体;
◆ Integrating the ventilation、the air exchange and temperature decrease together;
◆ 节能:耗电量少,只需传统空调的10%左右;
◆ Save energy:only use about 10% of power compared with regular air-conditioner;
◆ 环保:不含氟利昂(CFC);
◆ Protect environment: not including any Freon (CFC);
◆ 投资回报率高,几年内收回所有成本;
◆ High investment return rate, will return all the cost within few years;
◆ 能将室内的浑浊、闷热及有异味的空气替换排出室外;
◆ Can replace the muddy、swelter and peculiar smell air and discharge them out from inside workshop.
◆ 有效控制室内环境,在室内产生不同的风速,造成凉风效应,舒适、清爽;
◆ Control the environment in effect, come into being the different wind speed in workshop and create the clean and comfortable working environment.
◆ 减少传染性疾病,让工作人员在一个更加舒适、安全、放心的环境下工作;
◆ Decrease the infectivity illness and let staff work in a more comfortable、safe and disburden environment.
◆ 系统采用了*而精准的电脑温度控制器来自动调控系统设备的动作;
◆ The system using the advanced and accurate computer controller to control the operation automatically.
◆ 降温效果佳:外界空气经过水濂进入室内后,在水濂侧的室内温度可达到5-10℃的降温效果!
◆ Have good effect for lower temperature, the inside temperature at the cooling side can low down 5-10 degrees after outside air go into the inside through cooling pads.
水濂式蒸发冷却通风系统工作原理:
水濂式蒸发冷却通风系统的理念是:将厂房四周(包括天花板部分)全部密闭,使厂内空间与外界*隔绝,根据厂房的具体情况(比如厂房的结构,厂内机台种类等一系列因素)经过专业人员设计后,在厂房的一端安装上排风扇,将厂内的全部热气、废气等抽出厂外;在安装排风扇相对的另一端安装上水濂式降温系统。启动排风扇后,利用厂房内所产生的负压气流,吸引外界新鲜空气穿过水濂片,当空气与水濂片表面的水分进行充分的热交换后进入室内,空气的温度被降低,从而达到室内的降温效果,这种系统称为水濂式通风系统,即负压式通风系统
外界空气经过水濂进入室内后,在水濂侧的室内温度可达到5-10℃的降温效果!