 | | | - Adopts stable processor and optimum embedded OS to improve communication
performance.
- Two 10/100Mbps Ethernet ports support redundant system configuration, if necessary,
to ensure system stability. (Default 1 port and 1 optional port)
- If an optional 10/100Mbps is added, one can adopt the Ethernet bonding technology to
use the two ports as if they are one, enabling redundancy and drastic improvement of
communication speed. | | | | | | | - Provides two independent 10/100Mbps Ethernet ports.
- Includes 4 serial ports for RS - 232/422/485 to support configuration of subsystems in various ways.
- Independent operation of 4 serial ports increases operational efficiency of the system, and each ports supports
high speed communication of up to 115,200bps to enable speedy data update.
- It is applicable to the legacy serial communication-based power monitoring system without additional devices.
(One serial port on the IED side can be assigned to an upper system.) | | | | - ProNET-iMC uses standard protocols, such as ModBUS and DNP3.0.
- Embedded Web Server enables easy change of device settings and supports setup of IED configuration
information (protocol, communication rate, device address, etc.) to be connected to each serial port, and
configuration of the communication channel (Serial/Ethernet) with upper level for easy application to the IED of
other companies and legacy systems as well | | | | | | | Item | Communication Spec. | Speed | Distance | Comm. cable | | | | Media | Protocol | Max | Regular | Max | Regular | | | ProNET
-iMC | Upper | Serial :
RS-232
RS-422/485 | Modbus
DNP 3.0
LonWorks
BACNet | 120 kbps | 19.2 kbps~ 57.6 kbps | 30m
(RS-232)
1.2km
(RS-4xx) | 30m
(RS-232)
1.2km
(RS-4xx) | EIA RS-422 Cable | | | Lower | Serial :
RS-232
RS-422/485 | Modbus
DNP 3.0 | 120 kbps | 57.6 kbps | 30m
(RS-232)
1.2km
(RS-4xx) | 30m
(RS-232)
1.2km
(RS-4xx) | EIA RS-422 Cable | | | Ethernet : 10/100Mbps | Modbus/TCP
DNP 3.0/TCP | 100Mbps | 10Mbps | 100m | 100m | UTP Category 5 | | | | | | | | | | | | | | | | Item | Details | Remarks | | | | Dimensions | 200 mm x 250 mm | | | | Power Source | AC 100 ~ 240 V / 60 Hz | | | | MCU | 221MHz RISC Processor | SA1110 | | | RAM | 32 Mbytes SDRAM | Max 128 Mbytes | | | ROM | 16 Mbytes Flash | Max 32 Mbytes | | | Ethernet | 10/100 Mbps 1 Port (default) | IEEE 802.3 | | | 10/100 Mbps 1 Port (option) | | | Serial | RS-232C Console 1 Port | RS-422/485 port is electrically insulated | | | RS-232/422/485 4 Ports | | | USB | USB Client 1Port | | | | LED | 1 for each Power/Run/Error | | | | 1 Act and Link for each of 10/100 Ethernet | | | | 4 Rx and Tx for Serial Port | | | | | | | | Item | Specifications | Remarks | | | | Lower side | Serial 4 Ports(RS-232/RS-422/RS-485)
- RS-232 : non-insulated
- RS-422 : 4-Wire Full Duplex, electrically
insulated
- RS-485 : 2-Wire Half Duplex, electrically
insulated |
RJ-45 type/Modem Interface included
RJ-45 type/Port sharing with RS-232, 4-wire
RJ-45 type/ Port sharing with RS-232, 2-wire
(1 port can be assigned for connection to an upper system.) | | | Upper side | Ethernet 10/100 Mbps 2 Ports | RJ-45 type | | |
智能制造网APP
智能制造网手机站
智能制造网小程序
智能制造网官微
智能制造网服务号
