 One touch auto zero.
· External one touch auto zero function.
· External data hold function.
· External data peak hold function.
· External sample hold function.
· External full proof average function.
· External peak to peak function.
· External program lock function. YD-702 is applied to sensor(2ea), based on input 2ch, output 2ch.
In addition to, it can be changed input and output from of kinds of sensor according to user'requirement specification, can be installed this product at small space due to compact size and is designed to use in Data treatment device, progressing machine and measuring equipment.
Application sensor : Torque transducer, Load cell,Pressure Transducer, Potentiometer, Encoder, RPM sensor,AC LVDT etc.
Option * Analog outpu Auto zero | | | | | SPECIFICATIONS | | Temperature storage | -10~85℃ | | Temperature operating | 0~60℃ | | Relay output | AC 125V 0.5A DC24V 1A | | Transducer excitation | 5, 10V DC | | Type of inputs accepted | 0.3~3.5 | | Transducer current drive | 120mA | | Calibration method | Front panel switches | | Frequency response | 5KHz | | Full scale output | 0~5V, 10V | | Low pass filter | 10Hz, 100Hz, 1KHz, W/B | | Temperature drift | 0.02% FS/℃ | | A/D conversion | 16Bit | | Sampling speed | 500 times/sec | | Characters displayed | 5 digits | | Typical accuracy | ± 0.02% | | Polarity indicator | Yes | | Decimal point selection | Push button setup | | Resolution maximum | 99999 | | Type | 5×7DOT 20Digit 4Line | | Intput/Output connector | Push Button | | Weight | 1000g | | Mounting | Panel mounting | | Size | 96mm × 96mm | | Power requirements | 220V : 50/60Hz(option 110V AC), DC24V | | | | | | | | | |
智能制造网APP
智能制造网手机站
智能制造网小程序
智能制造网官微
智能制造网服务号
