便携式汽车轮轴重检测仪

便携式汽车轮轴重检测仪

便携式汽车轮轴重检测仪

浙江润鑫公司自进入市场以来，中国许多*的国家科研机构、重点高校和大型企事业单位就引进了许多汽车称重和模拟系统、软件，如中科院的许多科研所、航空航天研究所、清华大学、上海交通大学、同济大学等国内外科研机构建立了合作关系。上海大众、上海通用、一汽集团、奇瑞等企业也早已成为浙江润鑫公司的重要用户。
双板模式( STW-18-2)：只需要插两块称重板。车子*个轴的两个轮加载在称重板上，显示每个轮重量和轴重量。车子第二个轴的两个轮加载在称重板上，显示每个轮重量和轴重量。照此类推。当一组轮加载到称重板上且数据稳定后，按“存入”键可以存入并打印当前重量。整车称完后，可以按“打印”键可以打印出总重量。打印格式请参看附录一《打印格式》。
 
四板模式（ STW-18-3）：*四块称重板同时使用，也只能称四轮车。即汽车的四个轮都必须加载在四块称重板上。能显示出四个轮重的重量值，两个轴的轴重值，和汽车总重量值。当四个轮都加载在称重板上且保持稳定后，可以按“存入”键存入该次记录，按“打印”键打印该次记录。打印格式请参看附录一《打印格式》。
Double-plate mode ( STW-18-2): just two weighting plates need to insert. When the two wheels of the first axle are loaded to the weighing plate, the weight of each wheel and the axle weight are displayed. Then the two wheels of the second axle are loaded to the weighing plate, the weight of each wheel and the axle weight are displayed and so on. After one group of wheels are loaded to the weighing plate and the data gets stable, the current weight can be saved and printed by pressing “Store”. After the complete car is weighed, the total weight can be printed by printing “Print”. For printing format, see Appendix I “Printing Format”.
Four-plate mode ( STW-18-3): four weighting plates are necessary for use simultaneously; in this mode, only 4-wheel cars can be weighed, that is to say, the four wheels of the car must be loaded to the weighing plate and that the weight of the four wheels, the weight of the two axles and the total weight of the car can be displayed. After the four wheels are loaded to the weighing plate and the value gets stable, press “Store” to record the weight. The weight can be printed by printing “Print”. For printing format, see Appendix I “Printing Format”.       
以客户为中心：我们zui重要的技能是倾听——倾听客户在工作过程中遇到的难题，以了解他们不断增加的功能需求、时间压力、监管要求和预算限制。从一开始就做到正确无误已变得更加至关重要。理解客户需求的方法是努力倾听，这也是我们寻求*解决方案以应对客户的汽车轴重检测挑战的起点。只有通过倾听，我们技术能力高超的工程师团队以及我们久经时间考验且市场的产品组合才能发挥作用。