	（钻, 铣, 磨, 雕刻）高速电主轴	Applications	Drilling, Milling, Grinding, Engraving
外壳夹装尺寸	33 mm	Clamping diameter	33 mm
马达类型	3相异步高速电机	Motor system	3 Phase asynchronous motor
转速范	6,000 – 100,000 min-1	Speed range	6,000 – 100,000 rpm
额定电压	60 V	Voltage	60 V
电流	zui大 8 A	Current	max. 8 A
扭矩	zui大 8.4 Ncm	Torque	max. 8.4 Ncm
频率	100 – 1,666 Hz	Frequency	100 - 1,666 Hz
功率	zui大 500 W	Output power	max. 500 W
重量	1.0 kg	Weight	1.0 kg
轴承	3 x陶瓷轴承, 油脂润滑	Bearing system	3 x Hybrid, lifetime lubrication
防护等级	IP 55/57 (加密封气)	Protection category	IP 55/57 (with sealing air + optional accessory: sealing cap 2001 2618)
电机保护	KTY	Motor protection	KTY
安装位置		Working position
负载方向	径向 + 轴向	Load direction	axial + radial
锥面跳动	通常1 µm	Run-out (taper)	typ. 1 µm
*夹持范围	至 Ø 4.0 mm	Chuck clamping range	up to Ø 4.0 mm
换刀方式	压缩气 5 - 6 bar (管内经 Ø 4 mm)	Tool change	pneum. 5 - 6 bar (hose Ø 4 mm)
冷却系统	外夹具冷却	Cooling system	Cooling via clamping bracket
防水防尘措施	密封气 27 Nl/min (管内经 Ø 4 mm)	Protected against dirt and cooling lubricant	Sealing air 27 Nl/min (hose outer Ø 4 mm)
外壳材料	不锈钢	Housing material	Stainless steel
*变频器	e@syDrive® 4310 (IP 00), 4425, 4426, TV 4503*, TV 4506	Inverter recommendation	e@syDrive® 4310 (IP 00), 4425 4426, TV 4503*, TV 4506
特性	利用 6 bar 压缩气进行锥面清洁	Highlights	Taper cleaning at 6 bar
*输出功率有所降低	保留修改权	*reduced output power	Subject to change without notice