智能制造网APP
智能制造网手机站
智能制造网小程序
智能制造网官微
智能制造网服务号
| 2945 SERIES | ||
| 2945B | Communication Service Monitor, STD, English | |
| 2948B | Communications Service Monitor | |
| CALFB2945 | Calibration Certificate - 2945B & 2948B | |
| Opt 1 | 600 Ohm Matching Unit | |
| Opt 2 | Analog Systems Card (see note *) | |
| Opt 3 | High Stability OCXO (This Item is Fitted as Standard on 2948B) | |
| Opt 4 | Parallel Interface/Relay Drive (Cannot Be Fitted With Option 5) | |
| Opt 5 | GPIB Interface (Cannot Be Fitted With Option 4) | |
| Opt 6 | Memory Card Drive | |
| Opt 8 | SSB Demodulator | |
| Opt 9 | Occupied Bandwidth Measurement | |
| Opt 10 | NMT Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 11 | AMPS Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 12 | TACS Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 13 | MPT 1327 Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 14 | PMRTEST Software For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 15 | EDACS Radio Software For 2945B (Requires Opt 2 To Be Fitted) | |
| Opt 16 | EDACS Repeater Software For 2945B (Req. Opt 2 To Be Fitted) | |
| Opt 18 | LTR For 2945B (Requires Option 2 To Be Fitted) | |
| Opt 21 | Channel Demodulation Filter For 2945B (see note *) | |
| Opt 22 | POCSAG Software For 2945B | |
| Opt 23 | CCITT Filter (Cannot Be Fitted With Option 24) | |
| Opt 24 | CMESS Filter (Cannot Be Fitted With Option 23) | |
| Opt 25 | Avionics For 2948B | |
| Opt 26 | Tone Remote | |
| Opt 29 | Additional Notch Board | |
| Opt 30 | Bail Arm Handle & Front Stowage Cover For 2945B | |
| Opt 31 | IF Output Option | |
| Opt 32 | Internal Battery Pack (2945B Only) (see note *) | |
| * Options 2, 21 & 32 :- Due to Space Constraints any two of these options can be contained within a single | ||
| Instrument, but not all three. | ||
| Extended Standard Warranties for 294X Series | ||
| W2945B/203 | Extended Standard Warranty 36 Months | |
| W2945B/205 | Extended Standard Warranty 60 months | |
| W2948B/203 | Extended Standard Warranty 36 Months | |
| W2948B/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 294X Series | ||
| W2945B/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2945B/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2948B/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2948B/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2945B & 2948B Series | ||
| AC1109W | Easyspan II -Windows - USA | |
| 44991/145 | Microphone For 2945B | |
| 46662/571 | Soft Carrying/Operational Case | |
| 46662/616 | Soft Carrying/Operational Case for use with Option 30 | |
| 46662/779 | Soft Carrying Case (Suitable for all 294X, except early units with external battery) | |
| 46880/114 | Service Manual 2945B | |
| 46880/115 | Service Manual 2948B | |
| 46884/648 | Serial Printer Interface Cable 1.5M | |
| 46884/649 | Serial Port To PC Cable 25Way 1.5M | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/728 | Rack Mounting Kit For 2945 | |
| 54112/163 | Transit Case (Hard) For 2945 | |
| 54421/001 | BNC escopic Antenna For 2945 | |
| 54421/002 | Directional Power Head (HF) 1 MHz To 50 MHz For 2945 | |
| 54421/003 | Directional Power Head (VHF/UHF) 25 MHz To 1 GHz, 2945 | |
| 54431/023 | Attenuator, 20dB AF For 2945 | |
| 59000/375 | Memory Card 2M For 2945B Series | |
| 59999/170 | RF Bridge | |
| SECTION 1 - RADIO TEST SET PRODUCTS | ||
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT01/2945A | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2945A | Analog System Card (Fitting Charge B Code A) | |
| RTROPT03/2945A | High Stability OCXO (Fitting Charge A Code A) | |
| RTROPT04/2945A | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2945A | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2945A | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2945A | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2945A | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2945A | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2945A | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2945A | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2945A | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2945A | PRMTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2945A | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2945A | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT21/2945A | Demodulation Filters (Fitting Charge C Code A) | |
| RTROPT22/2945A | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2945A | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2945A | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT30/2945A | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| RTROPT01/2946A | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2946A | Analog System Card (Fitting Charge B Code A) | |
| RTROPT03/2946A | High Stability OCXO (Fitting Charge A Code A) | |
| RTROPT04/2946A | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2946A | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2946A | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2946A | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2946A | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2946A | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2946A | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2946A | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2946A | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2946A | PMRTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2946A | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2946A | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT21/2946A | Demodulation Filters (Fitting Charge C Code A) | |
| RTROPT22/2946A | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2946A | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2946A | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT30/2946A | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| RTROPT01/2948 | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2948 | Analog System Card (Fitting Charge C Code A) | |
| RTROPT04/2948 | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2948 | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2948 | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2948 | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2948 | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2948 | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2948 | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2948 | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2948 | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2948 | PMRTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2948 | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2948 | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT22/2948 | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2948 | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2948 | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT25/2948 | Avoinics Retrofit (Fitting Charge A Code A) | |
| RTROPT30/2948 | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| SECTION 1 - RADIO TEST SET PRODUCTS | ||
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT01/2945B | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2945B | Analog System Card (Fitting Charge B Code A) (see note *) | |
| RTROPT03/2945B | High Stability OCXO (Fitting Charge A Code A) | |
| RTROPT04/2945B | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2945B | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2945B | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2945B | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2945B | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2945B | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2945B | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2945B | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2945B | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2945B | PRMTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2945B | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2945B | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT18/2945B | LTR For 2945B (Requires Option 2 To Be Fitted) (Fitting Charge A Code A) | |
| RTROPT21/2945B | Demodulation Filters (Fitting Charge C Code A) (see note *) | |
| RTROPT22/2945B | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2945B | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2945B | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT26/2945B | Tone Remote (Fitting Charge A Code A) | |
| RTROPT29/2945B | Additional Distortion Notches Board (Fitting Charge B Code A) | |
| RTROPT30/2945B | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| RTROPT31/2945B | IF Output Option (Fitting Charge C Code A) | |
| RTROPT01/2948B | Opt 1 600 Ohm Matching Unit (Fitting Charge B Code A) | |
| RTROPT02/2948B | Analog System Card (Fitting Charge C Code A) (see note *) | |
| RTROPT04/2948B | Parallel Interface (Cannot Be Fitted With Opt 5) | |
| (Fitting Charge A Code A) | ||
| RTROPT05/2948B | GPIB Interface (Cannot Be Fitted With Opt 4) (Fitting Charge A Code A) | |
| RTROPT06/2948B | Memory Card Drive With Real Time Clock (Fitting Charge A Code A) | |
| RTROPT08/2948B | SSB Demodulator (Fitting Charge C Code A) | |
| RTROPT09/2948B | Occupied Bandwidth Measurement (Fitting Charge A Code A) | |
| RTROPT10/2948B | NMT Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT11/2948B | AMPS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT12/2948B | TACS Cellular (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT13/2948B | MPT1327 Trunking (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT14/2948B | PMRTEST (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT15/2948B | EDACS Radio Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT16/2948B | EDACS Repeater Test (Requires Opt 2) (Fitting Charge A Code A) | |
| RTROPT18/2948B | LTR For 2945B (Requires Option 2 To Be Fitted) (Fitting Charge A Code A) | |
| RTROPT21/2948B | Demodulation Filters (Fitting Charge C Code A) (see note *) | |
| RTROPT22/2948B | POCSAG Decode (Fitting Charge A Code A) | |
| RTROPT23/2948B | CCITT Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT24/2948B | CMESS Filter (Cannot Be Fitted With Opt 24) (Fitting Charge B Code A) | |
| RTROPT25/2948B | Avoinics Retrofit (Fitting Charge A Code A) | |
| RTROPT26/2948B | Tone Remote (Fitting Charge A Code A) | |
| RTROPT29/2948B | Additional Distortion Notches Board (Fitting Charge B Code A) | |
| RTROPT30/2948B | Bail Arm & Front Panel Stowage Cover (Fitting Charge A Code A) | |
| RTROPT31/2948B | IF Output Option (Fitting Charge C Code A) | |
| * Options 2, 21 & 32 :- Due to Space Constraints any two of these options can be contained within a single | ||
| Instrument, but not all three. | ||
| SECTION 1 - RADIO TEST SET PRODUCTS | ||
| 2310 | ||
| 2310 | 100 MHz To 2.4 GHz TETRA Signal Analyzer | |
| Opt 1 | Enhanced Dynamic Range For Wide Band Noise | |
| CALFB2310 | Calibration Certificate - 2310 | |
| Extended Standard Warranties for 2310 | ||
| W2310/203 | Extended Standard Warranty 36 Months | |
| W2310/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2310 | ||
| W2310/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2310/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2310 | ||
| 46880/081 | Service Manual 2310 | |
| 43129/189 | Standard GPIB Cable, 1M | |
| 43139/042 | RF Cable, 50 Ohm, BNC - BNC, 1.5M | |
| 46662/614 | Soft Carrying Case | |
| 46884/293 | Rack Mounting Kit (With Slides) 480-680 mm Depth | |
| 46884/294 | Rack Mounting Kit (With Slides) 680-840 mm Depth | |
| 46884/560 | Parallel Printer Interface Cable | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/931 | Rack Mounting Kit (Front Handles Only) | |
| 54311/092 | Coaxial Adapter N(M) To BNC(F) | |
| 54311/095 | RF Cable, 50 Ohm, N To N, 1M | |
| 2388 | ||
| 2388 | 1 GHz Active Probe Complete With PSU | |
| Extended Standard Warranties for 2388 | ||
| W2388/203 | Extended Standard Warranty 36 Months | |
| W2388/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2388 | ||
| W2388/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2388/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 202X SERIES | ||
| 2023A | Signal Generator 9 KHz To 1.2 GHz | |
| 2023B | Signal Generator 9 KHz To 2.05 GHz | |
| 2025 | Signal Generator 9 KHz To 2.51 GHz | |
| CALFB2023A | Calibration Certificate - 2023A, 2023B & 2025 | |
| Opt 1 | No Attenuator Fitted (Not Avail. With Opt 3, 7 Or 11) | |
| Opt 2 | AC/DC Power Supply | |
| Opt 3 | High Power Option For 2023A (Not Avail. With Opt 1, 7 Or 11) | |
| Opt 3 | High Power Option For 2023B & 2025 (Not Avail. With Opt 1, 7 Or 11) | |
| Opt 4 | Hi-Stability OCXO Crystal | |
| Opt 5 | Rear Exit Kit | |
| Opt 7 | Fast Pulse Modulator (Not Avail. With Opt 1, 3 Or 11) | |
| Opt 9 | Internal Pulse Generator | |
| Opt 10 | Modulation Input Sensitivity (1V/Pk) | |
| Opt 11 | Fast Pulse With High Power (Not Avail. With Opt 1, 3 Or 7) | |
| Opt 12 | SINAD Measurement | |
| Opt 100 | NOAA Internal (Fixed Width) Pulse Generator | |
| Opt 105 | Dedicated SINAD Input | |
| Extended Standard Warranties for 2023A, 2023B & 2025 | ||
| W2023A/203 | Extended Standard Warranty 36 Months | |
| W2023A/205 | Extended Standard Warranty 60 months | |
| W2023B/203 | Extended Standard Warranty 36 Months | |
| W2023B/205 | Extended Standard Warranty 60 months | |
| W2025/203 | Extended Standard Warranty 36 Months | |
| W2025/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2023A, 2023B & 2025 | ||
| W2023A/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2023A/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2023B/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2023B/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2025/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2025/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2023A, 2023B & 2025 | ||
| 43129/189 | Standard GPIB Cable, 1M | |
| 46662/601 | Transit Case For 2023, 2025 | |
| 46662/602 | Carrying Case For 2023, 2025 | |
| 46880/088 | Service Manual 2023A, 2023B & 2025 | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/792 | Front Bracket Handle Rack Mounting Kit For 2023, 2025 | |
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT04/2023A | Opt 4 Retrofit Kit For 2023A Series (Fitting Charge B Code A) | |
| RTROPT05/2023A | Opt 5 Retrofit Kit For 2023A Series (Fitting Charge C Code A) | |
| RTROPT09/2023A | Opt 9 Retrofit Kit For 2023A Series (Fitting Charge C Code A) | |
| RTROPT12/2023A | Opt 12 Retrofit Kit For 2023A Series (Fitting Charge C Code A) | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 2026 SERIES | ||
| 2026A | 2.05 GHz Signal Generator Two Source Version | |
| 2026B | 2.51 GHz Signal Generator Two Source Version | |
| 2026Q | CDMA Interferer | |
| CALFB2026 | Calibration Certificate - 2026A/B (For Two & Three Source) | |
| 2026A-Opt 1 | Third Internal Source For Signal Gen. 2026A (Requires A 2026A) | |
| 2026B-Opt 1 | Third Internal Source For Signal Gen. 2026B (Requires A 2026B) | |
| 2026A-Opt 1 + 118 | Third Internal Source For Signal Gen. 2026A With Fast Pulse | |
| Modulator Option (Requires A 2026A With Opt118 Fitted) | ||
| 2026B-Opt 1 + 118 | Third Internal Source For Signal Gen. 2026B With Fast Pulse | |
| Modulator Option (Requires A 2026B With Opt118 Fitted) | ||
| Opt 3 | Hi-Stability OCXO Crystal | |
| Opt 4 | Rear Exit Kit | |
| Opt 116 | GSM Modulation Emulator (Cannot Be Fitted With Opt 117) | |
| Opt 117 | Bluetooth GSM Modulation Emulator | |
| (Cannot Be Fitted With Opt 116) | ||
| 2026A-Opt 118 | Fast Pulse Modulator For Signal Gen. 2026A (Cannot Be Fitted | |
| To 2026Q) | ||
| Extended Standard Warranties for 2026 Series | ||
| W2026A/203 | Extended Standard Warranty 36 Months | |
| W2026A/205 | Extended Standard Warranty 60 months | |
| W2026AOPT1/203 | Extended Standard Warranty 36 Months | |
| W2026AOPT1/205 | Extended Standard Warranty 60 months | |
| W2026B/203 | Extended Standard Warranty 36 Months | |
| W2026B/205 | Extended Standard Warranty 60 months | |
| W2026BOPT1/203 | Extended Standard Warranty 36 Months | |
| W2026BOPT1/205 | Extended Standard Warranty 60 months | |
| W2026Q/203 | Extended Standard Warranty 36 Months | |
| W2026Q/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2026 Series | ||
| W2026A/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026A/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2026B/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026B/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2026AOPT1/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026AOPT1/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2026BOPT1/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026BOPT1/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2026Q/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2026Q/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2026 Series | ||
| 43129/189 | Standard GPIB Cable, 1M | |
| 46662/614 | Soft Carrying Case | |
| 46880/077 | Service Manual 2026 | |
| 46880/087 | Service Manual 2026Q | |
| 46880/100 | Service Manual 2026A/B | |
| 46884/293 | Rack Mounting Kit 2026/Q, 480-680 mm Depth | |
| 46884/294 | Rack Mounting Kit 2026/Q, 680-840 mm Depth | |
| 46884/649 | Serial Port To PC Cable 25Way 1.5M | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/931 | Rack Mounting Kit (Front Handles Only) | |
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT03/2026A | Opt 3 Retrofit Kit For 2026A Series (Fitting Charge B Code A) | |
| RTROPT116/2026 | Opt 116 Retrofit Kit For 2026 Series (Fitting Charge E Code A) | |
| RTROPT116/2026/4 | Opt 116 Retrofit Kit For 2026 Series Fitted With Opt 4 (Fitting | |
| Charge E Code A) | ||
| RTROPT116/2026A | Opt 116 Retrofit Kit For 2026A/B Series (Fitting Charge E Code A) | |
| RTROPT116/2026A/4 | Opt 116 Retrofit Kit For 2026A/B Series Fitted With Opt 4 (Fitting | |
| Charge E Code A) | ||
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 203X, 204X, 205X SERIES & 750C | ||
| 2030 | Signal Generator 10 KHz To 1.35 GHz | |
| 2031 | Signal Generator 10 KHz To 2.7 GHz | |
| 2032 | Signal Generator 10 KHz To 5.4 GHz | |
| 2040 | Signal Generator 10 KHz To 1.35 GHz Low Noise | |
| 2041 | Signal Generator 10 KHz To 2.7 GHz Low Noise | |
| 2042 | Signal Generator 10 KHz To 5.4 GHz Low Noise | |
| 2050 | Signal Generator 10 KHz To 1.35 GHz Digital & Vector Version | |
| 2050T | Signal Generator 10 KHz To 1.35 GHz Adv Dig & Vect For TETRA | |
| 2051 | Signal Generator 10 KHz To 2.7 GHz Digital & Vector Version | |
| 2051T | Signal Generator 10 KHz To 2.7 GHz Adv Dig & Vect For TETRA | |
| 2052 | Signal Generator 10 KHz To 5.4 GHz Digital & Vector Version | |
| 2052T | Signal Generator 10 KHz To 5.4 GHz Adv Dig & Vect For TETRA | |
| CALFB2030 | Calibration Certificate - 2030, 31, 32, 40, 41, 42, 50, 50T, 51, 51T, 52 & 52T | |
| Opt 1 | Second Internal Modulation Oscillator | |
| Opt 2 | Pulse Modulation | |
| Opt 3 | +19dBm Output Level (2030 & 2040 Only) (Not Avail w/ Opt 6) | |
| Opt 5 | GMSK BT 0.3 Modulation (GSM) (203X Series Only) | |
| Opt 6 | Avionics (LLS & VOR) (Needs Opt 1, Cannot Fit With Opt 3) | |
| Opt 8 | RF Profiles & Complex Sweep | |
| Opt 9 | Internal Pulse Generator (Needs Opt 2) (203X Series Only) | |
| Opt 10 | DME Modulator (203X Only; Needs Opt 1 & 6, Not Avail w/ Opt 3 & 5) | |
| Opt 12 | Electronic Attenuator (Not available on 2032, 2042 & 2052, or with Opt 10 DME, | |
| or with Opt 3) | ||
| Opt 105 | DECT Modifier For Option 2 | |
| Opt 112 | External Mod Input 600 Ohm | |
| 750C | NAV-750C (52030/558) VOR/LOC/GS/Comm/Mkr Bench Test Equipment | |
| Extended Standard Warranties for 2030, 2040, 2050 Series & 750C | ||
| W2030/203 | Extended Standard Warranty 36 Months | |
| W2030/205 | Extended Standard Warranty 60 months | |
| W2031/203 | Extended Standard Warranty 36 Months | |
| W2031/205 | Extended Standard Warranty 60 months | |
| W2032/203 | Extended Standard Warranty 36 Months | |
| W2032/205 | Extended Standard Warranty 60 months | |
| W2040/203 | Extended Standard Warranty 36 Months | |
| W2040/205 | Extended Standard Warranty 60 months | |
| W2041/203 | Extended Standard Warranty 36 Months | |
| W2041/205 | Extended Standard Warranty 60 months | |
| W2042/203 | Extended Standard Warranty 36 Months | |
| W2042/205 | Extended Standard Warranty 60 months | |
| W2050/203 | Extended Standard Warranty 36 Months | |
| W2050/205 | Extended Standard Warranty 60 months | |
| W2050T/203 | Extended Standard Warranty 36 Months | |
| W2050T/205 | Extended Standard Warranty 60 months | |
| W2051/203 | Extended Standard Warranty 36 Months | |
| W2051/205 | Extended Standard Warranty 60 months | |
| W2051T/203 | Extended Standard Warranty 36 Months | |
| W2051T/205 | Extended Standard Warranty 60 months | |
| W2052/203 | Extended Standard Warranty 36 Months | |
| W2052/205 | Extended Standard Warranty 60 months | |
| W2052T/203 | Extended Standard Warranty 36 Months | |
| W2052T/205 | Extended Standard Warranty 60 months | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| Extended Warranties for 2030, 2040, 2050 Series & 750C (Continued) | ||
| Extended Standard Warranties with Calibration for 2030, 2040, 2050 Series & 750C | ||
| W2030/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2030/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2031/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2031/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2032/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2032/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2040/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2040/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2041/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2041/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2042/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2042/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2050/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2050/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2050T/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2050T/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2051/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2051/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2051T/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2051T/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2052/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2052/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2052T/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2052T/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W750C/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W750C/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2030, 2040 & 2050 Series & 750C | ||
| 43129/189 | Standard GPIB Cable, 1M | |
| 43139/042 | RF Cable, 50 Ohm, BNC - BNC, 1.5M | |
| 44991/144 | Breakout Box For Multiple Connections On 2050/T | |
| 46662/525 | Transit Case | |
| 46880/047 | Service Manual 2030 Series | |
| 46880/050 | Service Manual 2040 Series | |
| 46880/062 | Service Manual 2050 Series | |
| 46880/078 | Service Manual 2050T Series | |
| 46884/291 | Rack Mounting Kit 2030/40/50 Series With Slides (Short) | |
| 46884/292 | Rack Mounting Kit 2030/40/50 Series With Slides (Long) | |
| 46884/444 | Maintenance Kit For 2030/40/50 Series | |
| 46884/541 | Rack Mounting Kit (Bracket Only) For 2030/40/50 Series | |
| 54112/164 | Carrying Case (Soft) For 2030 Series | |
| 54311/092 | Coaxial Adapter N(M) To BNC(F) | |
| 54311/095 | RF Cable, 50 Ohm, N To N, 1M | |
| 59999/163 | Precision Adapter N(M) - SMA(F) | |
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT01/2030 | 2nd Modulation Oscillator Retrofit Kit (Fitting Charge B Code A) | |
| RTROPT12/2030 | Option 12 Retrofit Kit (Fitting Charge C Code A) | |
| RTROPT12/2030/5 | Option 12 Retrofit Kit With Option 5 Fitted (Fitting Charge C Code A) | |
| RTROPT12/2030/9 | Option 12 Retrofit Kit With Option 9 Fitted (Fitting Charge C Code A) | |
| RTROPT12/2040 | Option 12 Retrofit Kit (Fitting Charge C Code A) | |
| RTROPT12/2050 | Option 12 Retrofit Kit (Fitting Charge C Code A) | |
| RTRGSM/2050/7001 | GSM Retrofit - 2050 Series (Fitting Charge D Code A) | |
| RTRGSM/2050/7006 | GSM Retrofit - 2050 Series (Fitting Charge D Code A) | |
| RTRGSM/2050/8001 | GSM Retrofit - 2050 Series (Fitting Charge D Code A) | |
| RTRGSM/2050/8005 | GSM Retrofit - 2050 Series (Fitting Charge D Code A) | |
| RTRVOR/2030 | Avionics VOR Index Upgrade Kit (Fitting Charge B Code A) | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 3002 | ||
| 3002 | 10 KHz To 2.4 GHz Signal Generator With High Power Attenuator | |
| Opt 11 | Opt.11 Fast Pulse | |
| Extended Standard Warranties for 3002 | ||
| W3002/203 | Extended Standard Warranty 36 Months | |
| W3002/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 3002 | ||
| W3002/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3002/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| SECTION 2 - SIGNAL GENERATOR PRODUCTS | ||
| 341X SERIES | ||
| 3412 + Opt 1 | 2GHz Signal Generator With Ext IQ Modulation (No. Attenuator) | |
| 3412 + Opt 2 | 2GHz Signal Generator With Ext IQ Modulation (Mechanical Attenuator) | |
| 3412 + Opt 3 | 2GHz Signal Generator With Ext IQ Modulation (Electronic Attenuator) | |
| 3413 + Opt 1 | 3GHz Signal Generator With Ext IQ Modulation (No. Attenuator) | |
| 3413 + Opt 2 | 3GHz Signal Generator With Ext IQ Modulation (Mechanical Attenuator) | |
| 3413 + Opt 3 | 3GHz Signal Generator With Ext IQ Modulation (Electronic Attenuator) | |
| 3414 + Opt 1 | 4GHz Signal Generator With Ext IQ Modulation (No. Attenuator) | |
| 3414 + Opt 3 | 4GHz Signal Generator With Ext IQ Modulation (Electronic Attenuator) | |
| 3416 + Opt 1 | 6GHz Signal Generator With Ext IQ Modulation (No. Attenuator) | |
| 3416 + Opt 3 | 6GHz Signal Generator With Ext IQ Modulation (Electronic Attenuator) | |
| Opt 5 | Dual ARB (Not available with Opt 8) | |
| Opt 6 | Fast Pulse Modulator (Not available with Opt 9) | |
| Opt 7 | Rear Panel Outputs | |
| Opt 8 | Real Time Baseband RTBB (Not available with Opt 5 or 9) | |
| Opt 9 | Differential I/Q Outputs (Not available with Opt 6) | |
| Opt 10 | List Mode (Not available with Opt 2). | |
| Opt 20 | 2G CDMA Licence (Requires Option 5) | |
| Opt 21 | 2G & 3G CDMA Licence (Requires Option 5) | |
| Opt 300 | Example waveforms; selection (Requires Opts 5 and 21) | |
| Opt 301 | CDMA example waveforms (Requires Opts 5 and 21) | |
| Opt 302 | Cellular example waveforms (Requires Opt 5) | |
| Opt 303 | PMR example waveforms (Requires Opt 5) | |
| Opt 304 | Avionics example waveforms (Requires Opt 5) | |
| Opt 305 | WLAN example waveforms (Requires Opt 5) | |
| Opt 306 | Salite/Cable example waveforms (Requires Opt 5) | |
| Opt 307 | Digital cordless example waveforms (Requires Opt 5) | |
| Extended Standard Warranties for 3410 Series | ||
| W3412/203 | Extended Standard Warranty 36 Months | |
| W3412/205 | Extended Standard Warranty 60 months | |
| W3413/203 | Extended Standard Warranty 36 Months | |
| W3413/205 | Extended Standard Warranty 60 months | |
| W3414/203 | Extended Standard Warranty 36 Months | |
| W3414/205 | Extended Standard Warranty 60 months | |
| W3416/203 | Extended Standard Warranty 36 Months | |
| W3416/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 3410 Series | ||
| W3412/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3412/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W3413/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3413/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W3414/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3414/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W3416/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W3416/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 3410 Series | ||
| 46880/111 | Service Manual 3410 Series | |
| 46885/138 | Front Panel Rack Mounting Kit | |
| 46662/745 | Soft Carrying Case | |
| 82542 | Breakout Box (for auxilliary connector) | |
| Retrofit Options | Please Refer to Footnotes for Fitting Charges | |
| RTREVM/3410 | Improved EVM Retrofit Kit (Fitting Charge D Code R) | |
| RTROPT05/3410 | Dual Channel ARB Retrofit Kit (Fitting Charge B Code A) | |
| RTROPT06/3410 | Pulse Modulation Retrofit Kit (Fitting Charge C Code R) | |
| RTROPT08/3410 | Real Time Baseband RTBB Retrofit Kit (Fitting Charge B Code A) | |
| RTROPT10/3410 | List Mode Retrofit Kit (Fitting Charge A Code R) (Export Restrictions apply outside | |
| the EU, please contact your Sales Office for details) | ||
| RTROPT21/3410 | 2G & 3G CDMA Licence (Fitting Charge A Code C) | |
| SECTION 3 - S-SERIES PRODUCTS | ||
| SGA SERIES | ||
| SGA-3 | 100 kHz to 3 GHz analog signal generator | |
| SGA-6 | 100 kHz to 6 GHz analog signal generator | |
| SPA-6 | High Power( +30dBm) Amplifier | |
| SCO-6 | RF Combiner( 6GHz ) | |
| SPS-8 | 8 GHz Power Sensor and Power Meter Ap for S-series or PC | |
| Option 001 | FM and AM modulation | |
| Option 003 | High Power (+20 dBm) | |
| Option 004 | Fast Pulse Modulation | |
| Option 005 | Removable Memory | |
| Option 006 | Avionics | |
| Option 007 | Rear panel connectors | |
| CAL17025SGA | ISO 17025 Calibration (Not available if Options 4, or 6 are selected) | |
| CAL17025SGA | ISO 17025 Calibration (Not available if Options 4, or 6 are selected) | |
| Extended Standard Warranties for SGA-3 and SGA-6 | ||
| WSGA3/203 | Extended Standard Warranty 36 Months | |
| WSGA3/205 | Extended Standard Warranty 60 Months | |
| WSGA6/203 | Extended Standard Warranty 36 Months | |
| WSGA6/205 | Extended Standard Warranty 60 Months | |
| Extended Standard Warranties with Calibration for SGA-3 and SGA-6 | ||
| WSGA3/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSGA3/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| WSGA6/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSGA6/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for SGA-3 and SGA-6 | ||
| 43129/189 | 1.5 m GPIB cable | |
| 46662/836 | Soft Carry Case | |
| 46662/835 | Hard Transit Case | |
| 43139/042 | RF double screened cable 50 ohm 1.5 m, BNC (m) | |
| 44991/918T | Hard Disk Drive, Spare | |
| 46885/505 | Rack Mounting Kit (single SGA) | |
| 46885/506 | Rack Mounting Kit (two SGA ) | |
| 54311/095 | RF double screened cable 50 ohm 1 m, type-N (m) | |
| 54311/092 | Coaxial adapter N (m) to SMA (f) | |
| 46880/124 | Service Manual SGA | |
| SGD SERIES | ||
| SGD-3 | 100 kHz to 3 GHz Digital signal generator | |
| SGD-6 | 100 kHz to 6 GHz Digital signal generator | |
| SPA-6 | High Power( +30dBm) Amplifier | |
| SCO-6 | RF Combiner( 6GHz ) | |
| SPS-8 | 8 GHz Power Sensor and Power Meter Ap for S-series or PC | |
| Option 003 | High Power (+20 dBm) | |
| Option 004 | Fast Pulse Modulation | |
| Option 005 | Removable Storage Disk | |
| Option 007 | Rear panel connectors | |
| Arbitrary Waveform Generator options (includes IQ Creator): | ||
| Option 010 | AWG with 128 Msamples memory | |
| Option 011 | AWG with 500 Msamples memory | |
| Option 012 | AWG with 1 Gsamples memory | |
| SECTION 3 - S-SERIES PRODUCTS | ||
| IQCreator enable options | ||
| Option 101 | Waveform creation package - Basic (options 111, 112, 113, 114, 115 & 116) | |
| Option 102 | Waveform creation package - Advanced (options 101, 117, 118 & 119) | |
| Option 111 | 3GPP (GSM, EDGE, EGPRS, EGPRS2, WCDMA, HSPA, HSPA+) | |
| Option 112 | 3GPP2 (CDMA2000, 1xEVDO (0+A)) | |
| Option 113 | TD-SCDMA (3GPP TDD-LCR) | |
| Option 114 | Bluetooth (V.11 + V.21 + EDR + Version 4) | |
| Option 115 | WLAN (a, b, g, n) | |
| Option 117 | LTE FDD | |
| Option 118 | LTE TDD | |
| Option 119 | WLAN 802.11 ac (Requires option 115) | |
| Extended Standard Warranties for SGD-3 and SGD-6 | ||
| WSGD3/203 | Extended Standard Warranty 36 Months | |
| WSGD3/205 | Extended Standard Warranty 60 Months | |
| WSGD6/203 | Extended Standard Warranty 36 Months | |
| WSGD6/205 | Extended Standard Warranty 60 Months | |
| Extended Standard Warranties with Calibration for SGD-3 and SGD-6 | ||
| WSGD/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSGD3/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| WSGD6/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSGD6/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for SGD-3 and SGD-6 | ||
| 43129/189 | 1.5 m GPIB cable | |
| 46662/836 | Soft Carry Case | |
| 46662/835 | Hard Transit Case | |
| 43139/042 | RF double screened cable 50 ohm 1.5 m, BNC (m) | |
| 44991/918T | Hard Disk Drive, Spare | |
| 46885/505 | Rack Mounting Kit (single SGD) | |
| 46885/506 | Rack Mounting Kit (two SGD ) | |
| 54311/095 | RF double screened cable 50 ohm 1 m, type-N (m) | |
| 54311/092 | Coaxial adapter N (m) to SMA (f) | |
| 46880/124 | Service Manual SGD | |
| SVA SERIES | ||
| SVA-6 | 250 kHz to 6 GHz Vector Signal Analyzer | |
| SVA-13 | 250 kHz to 13 GHz Vector Signal Analyzer | |
| SPS-8 | 8 GHz Power Sensor and Power Meter Ap for S-series or PC | |
| Option 005 | Removable Storage Disk | |
| Option 007 | Rear panel connectors | |
| Analysis Options | ||
| Option 150 | Measurement Suite package - Basic(options 152, 102, 103, 104, 106 & 109) | |
| Option 151 | Measurement Suite package - Advanced (options 150, 107, 108 & 110) | |
| Option 152 | 3GPP (GSM, EDGE, EGPRS, EGPRS2, WCDMA, HSPA, HSPA+) Measurement suite | |
| Option 102 | 3GPP2 (CDMA2000, 1xEVDO (0+A)) Measurement suite | |
| Option 103 | WLAN (a, b, g, n) Measurement suite | |
| Option 106 | Bluetooth (V.11 + V.21 + EDR + Version 4) Measurement Suite | |
| Option 107 | LTE FDD Measurement Suite | |
| Option 108 | LTE TDD Measurement Suite | |
| Option 109 | TD-SCDMA (3GPP TDD-LCR) Measurement Suite | |
| Option 110 | WLAN 802.11 ac Measurement suite (Requires Option 103) | |
| SECTION 3 - S-SERIES PRODUCTS | ||
| Extended Standard Warranties for SVA-6 and SVA-13 | ||
| WSVA6/203 | Extended Standard Warranty 36 Months | |
| WSVA6/205 | Extended Standard Warranty 60 Months | |
| WSVA13/203 | Extended Standard Warranty 36 Months | |
| WSVA13/205 | Extended Standard Warranty 60 Months | |
| Extended Standard Warranties with Calibration for SVA-6 and SVA-13 | ||
| WSVA6/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSVA6/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| WSVA13/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| WSVA13/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for SVA-6 and SVA-13 | ||
| 43129/189 | 1.5 m GPIB cable | |
| 46662/836 | Soft Carry Case | |
| 46662/835 | Hard Transit Case | |
| 43139/042 | RF double screened cable 50 ohm 1.5 m, BNC (m) | |
| 44991/918T | Hard Disk Drive, Spare | |
| 46885/505 | Rack Mounting Kit (single SVA) | |
| 46885/506 | Rack Mounting Kit (two SVA ) | |
| 54311/095 | RF double screened cable 50 ohm 1 m, type-N (m) | |
| 54311/092 | Coaxial adapter N (m) to SMA (f) | |
| 46880/124 | Service Manual SVA | |
| SECTION 4 - SIGNAL ANALYZER PRODUCTS | ||
| 2309, 2310 | ||
| 2309 | 100 MHz To 2.4 GHz FFT Analyzer | |
| 2310 | 100 MHz To 2.4 GHz TETRA Signal Analyzer | |
| Opt 1 | Enhanced Dynamic Range For Wide Band Noise (2310 Only) | |
| CALFB2310 | Calibration Certificate - (2309 & 2310 Only) | |
| Extended Standard Warranties for 2309 & 2310 | ||
| W2309/203 | Extended Standard Warranty 36 Months | |
| W2309/205 | Extended Standard Warranty 60 months | |
| W2310/203 | Extended Standard Warranty 36 Months | |
| W2310/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2309 & 2310 | ||
| W2309/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2309/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W2310/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2310/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| Accessories for 2309 & 2310 | ||
| 46880/081 | Service Manual 2310 | |
| 46880/091 | Service Manual 2309 | |
| 43129/189 | Standard GPIB Cable, 1M | |
| 43139/042 | RF Cable, 50 Ohm, BNC - BNC, 1.5M | |
| 46662/614 | Soft Carrying Case | |
| 46884/293 | Rack Mounting Kit (With Slides) 480-680 mm Depth | |
| 46884/294 | Rack Mounting Kit (With Slides) 680-840 mm Depth | |
| 46884/560 | Parallel Printer Interface Cable | |
| 46884/650 | Serial Port To PC Cable 9Way 1.5M | |
| 46884/931 | Rack Mounting Kit (Front Handles Only) | |
| 54311/092 | Coaxial Adapter N(M) To BNC(F) | |
| 54311/095 | RF Cable, 50 Ohm, N To N, 1M | |
| 2388 | ||
| 2388 | 1 GHz Active Probe Complete With PSU | |
| Extended Standard Warranties for 2388 | ||
| W2388/203 | Extended Standard Warranty 36 Months | |
| W2388/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 2388 | ||
| W2388/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W2388/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| SECTION 6 - MICROWAVE PRODUCTS | ||
| 68XX SERIES | ||
| 6813A | 20 GHz Microwave Generator (Export Licence May Apply) | |
| 6815A | 46 GHz Microwave Generator (Export Licence May Apply) | |
| 6815AR | 40 GHz Microwave Generator (Export Licence May Apply) | |
| 6821A | 3 GHz Scalar Analyzer | |
| 6822A | 8.4 GHz Scalar Analyzer | |
| 6823A | 20 GHz Scalar Analyzer | |
| 6824A | 24 GHz Scalar Analyzer | |
| 6825A | 46 GHz Scalar Analyzer (Export Licence May Apply) | |
| 6825AR | 40 GHz Scalar Analyzer | |
| 6841A | 3 GHz System Analyzer (With 4.2 GHz Spectrum Analyzer) | |
| 6842A | 8.4 GHz System Analyzer (With 20 GHz Spectrum Analyzer) | |
| 6843A | 20 GHz System Analyzer | |
| 6844A | 24 GHz System Analyzer | |
| 6845A | 46 GHz System Analyzer (Export Licence May Apply) | |
| 6845AR | 40 GHz System Analyzer | |
| 6846A | 8.4 GHz System Analyzer (With 24 GHz Spectrum Analyzer) | |
| 6847A | 20 GHz System Analyzer (With 26.5 GHz Spectrum Analyzer) | |
| 6848A | 3 GHz System Analyzer (With 20 GHz Spectrum Analyzer) | |
| Note: - Where Export licences may be required, please contact the local sales office | ||
| CALFB6800 | Calibration Certificate - 6813A, 15A, 21A, 22A, 23A, 24A, 25A/R, 41A, 42A, 43A, 44A, 45A/R, 46A, 47A, 48A | |
| Opt 2 | Field Replaceable Connector (6813A, 22A, 23A, 24A,42A, 43A, 44A, 46A, 47A only) 2 Req for 684X | |
| Opt 2 | Field Replaceable Connector (6815A/AR, 6825A/AR, 6845A/AR only) 2 Req For 6845A/AR | |
| Opt 10 | 3 GHz 110 dB Attenuator (6821A, 41A, 48A only) | |
| Opt 11 | 20 GHz 70 dB Attenuator (6813A, 22A, 23A, 42A, 43A, 46A, 47A only) | |
| Opt 12 | 24 GHz 90 dB Attenuator (6813A, 22A, 23A, 24A, 42A, 43A, 44A, 46A, 47A only) | |
| Opt 13 | 40GHz 70 dB Attenuator (6815A/AR, 25A/AR, 45A/AR only) | |
| Opt 20 | External Mixer Support (Not With Opt 22 Except With 6841A/6848A) | |
| Opt 22 | Group Delay (6841A, 48A only) | |
| Opt 22 | Group Delay (6842A, 43A, 44A, 45A/AR, 46A, 47A only) | |
| Opt 23 | Modulation (Not With Opt 22) | |
| Opt 24 | Trigger Board Option (681X series only) | |
| Opt 25A | 18GHz Internal Pulse Modulator (6813A, 22A, 23A only) (Export Licence May Apply) | |
| Opt 25B | 40GHz Internal Pulse Modulator (6815A/AR, 24A, 25A/AR only) (Export Licence May Apply) | |
| Opt 30 | 8.4 GHz Higher Output Power Option (6822A, 42A, 46A only) | |
| Opt 30 | 20 GHz Higher Output Power Option (6823A, 43A, 47A only) | |
| Opt 30 | 24 GHz Higher Output Power Option (6824A, 44A only) | |
| Extended Standard Warranties for 6800 Series | ||
| W6813/203 | Extended Standard Warranty 36 Months | |
| W6813/205 | Extended Standard Warranty 60 months | |
| W6815/203 | Extended Standard Warranty 36 months | |
| W6815/205 | Extended Standard Warranty 60 months | |
| W6821/203 | Extended Standard Warranty 36 Months | |
| W6821/205 | Extended Standard Warranty 60 months | |
| W6822/203 | Extended Standard Warranty 36 Months | |
| W6822/205 | Extended Standard Warranty 60 months | |
| W6823/203 | Extended Standard Warranty 36 Months | |
| W6823/205 | Extended Standard Warranty 60 months | |
| W6824/203 | Extended Standard Warranty 36 Months | |
| W6824/205 | Extended Standard Warranty 60 months | |
| W6825/203 | Extended Standard Warranty 36 Months | |
| W6825/205 | Extended Standard Warranty 60 months | |
| W6841/203 | Extended Standard Warranty 36 Months | |
| W6841/205 | Extended Standard Warranty 60 months | |
| W6842/203 | Extended Standard Warranty 36 Months | |
| W6842/205 | Extended Standard Warranty 60 months | |
| W6843/203 | Extended Standard Warranty 36 Months | |
| W6843/205 | Extended Standard Warranty 60 months | |
| W6844/203 | Extended Standard Warranty 36 Months | |
| W6844/205 | Extended Standard Warranty 60 months | |
| SECTION 6 - MICROWAVE PRODUCTS | ||
| Extended Standard Warranties for 6800 Series (Continued) | ||
| W6845/203 | Extended Standard Warranty 36 Months | |
| W6845/205 | Extended Standard Warranty 60 months | |
| W6846/203 | Extended Standard Warranty 36 Months | |
| W6846/205 | Extended Standard Warranty 60 months | |
| W6847/203 | Extended Standard Warranty 36 Months | |
| W6847/205 | Extended Standard Warranty 60 months | |
| W6848/203 | Extended Standard Warranty 36 Months | |
| W6848/205 | Extended Standard Warranty 60 months | |
| Extended Standard Warranties with Calibration for 6800 Series | ||
| W6813/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6813/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6815/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6815/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6821/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6821/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6822/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6822/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6823/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6823/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6824/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6824/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6825/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6825/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6841/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6841/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6842/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6842/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6843/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6843/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6844/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6844/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6845/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6845/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6846/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6846/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6847/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6847/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| W6848/203C | Extended Standard Warranty 36 Months with scheduled calibration | |
| W6848/205C | Extended Standard Warranty 60 Months with scheduled calibration | |
| RetroFit Options | Please Refer to Footnotes for Fitting Charges | |
| RTROPT25A/6800 | 18GHz Internal Pulse Modulator (6813A, 6822A, 6823A only)(Fitting Charge E, Code R)(Export Licence | |
| May Apply) | ||
| RTROPT25B/6800 | 40GHz Internal Pulse Modulator (6815A/AR, 6824A, 6825A/AR only)(Fitting Charge E, Code R)(Export | |
| Licence May Apply) | ||
| RTROPT23/6800 | FM and Pulse Generator (Not With Opt 22) (Fitting Charge A, Code A) | |
| Note: Please check with the factory before Quoting RTROPT23 if the Retrofit is | ||
| intended for an instrument with a serial number lower than 680001/100. | ||
| Additional hardware may be required for these earlier units. | ||
深圳市宏美瑞科技有限公司总部位于美丽的深圳，是集科、工、贸为一体，专业从事电子测试测量仪器仪表研发生产、代理销售的综合企业服务商。我们通过多年的努力，凭借便捷的进货渠道和服务网络，为客户提供专业的产品选型、技术支持、现场测试等快捷的本地化服务，已成为国内有一定影响力的仪器仪表销售公司。
公司在美国、德国、英国、瑞士、日本及港台地区拥有许多优秀的*合作伙伴，*代理销售泰克Tektronix、PEM、牛顿N4L、太平洋电源Pacific power、吉时利Keithley、是德科技Keysight、福禄克Fluke、雷泰Raytek、菲利尔FLIR、中茂Chroma、日置HIOKI、菊水KIKUSUI “ 艾德克斯”“同惠”等国内外品牌。主营产品有示波器、探头、红外热像仪、环路分析仪、罗氏线圈电流探头、电子负载、可编程交直流电源、大功率电源、高压探头、LCR数字电桥、功率分析仪、耐压测试仪、万用表、信号发生器、音频分析仪、电能质量分析仪、晶体管图示仪、EMI接收机、光谱分析仪、在线蓄电池测试、安规测试仪、电源自动化测试系统等。产品用途覆盖通信、工业电子制造、新能源、微电子、 航空航天，科研院所大学等行业， 我们严格遵循以优秀的产品去服务于客户，帮助客户选择Z适合的解决方案。
公司具有十分充实的仪器存货，因此可以保证广大客户的多样化选择及需求，也能让您现场体验操作。我们销售的每一台仪器都附有制造厂商出具的计量合格证书及质量保证书。保证产品功能完好，附件齐全，指标达到出厂标准。我们一直秉承"科技*，诚信服务"的理念, 凭借着高质量的产品，良好的信誉，优质的服务。产品已全国近三十多个省、市、自治区以及远销香港、中国台湾、地区，欢迎来自不同地区的朋友询价！
仪器仪表，自动化设备，汽车电子
6813A 20 GHz Microwave Generator （Export Licence M 产品信息
关键词：GSM
在找 6813A 20 GHz Microwave Generator （Export Licence M 产品的人还在看
