智能制造网APP
智能制造网手机站
智能制造网小程序
智能制造网官微
智能制造网服务号
一、概述
多功能高效磨浆除砂疏解机主要用于造纸行业（漂白）净化后浆料的连续磨浆或废纸再生浆料疏解后均解磨浆。经过磨浆处理，可使纤维的抗拉强度，破裂强度，纤维内部的结合强度和打浆度均有提高。经本机处理过的纸浆可得到较好的抗张力，耐折力，以较好的挺硬度与透气度的组合性。本机既可与双盘磨串联磨浆，也可与锥形磨串联磨浆或单机使用。
本机具有设计新颖，生产效率高，磨浆区域长，磨浆质量好，进退刀间隙控制精确，电耗低，噪音小，操作方便，维修容易等优点。
1. Overview
The multi-function and high-efficiency grinding and desanding fluffer is mainly used for continuous refining of pulp after bleaching or for desanding of recycled pulp from waste paper in paper making industry. After refining, the tensile strength, breaking strength, bonding strength and pulping degree of the fibers can be improved. The pulp treated by this machine has better tension resistance, folding resistance, stiffness and air permeability. The machine can be used in series grinding with double disc mill, and can be used in series grinding with conical mill or single machine.
The machine has the advantages of novel design, high production efficiency, long pulping area, good pulping quality, precise control of feed and withdrawal clearance, low power consumption, low noise, easy operation and maintenance.
二、技术特征：
2.Technical characteristics
型 号 | 进口×出口 （Ømm） | 生产能力（绝干吨/日） | 浓度% | 进口压力 （m水柱） | 出口压力 （m水柱） | 动力 (kw) | |
三阶 | 四阶 | ||||||
ZLCⅡ-5.5 | 65×50 | 5 | 3 | 2-5 | 2-3 | 6-8 | 5.5 |
ZLCⅡ-7.5 | 65×50 | 7 | 4 | 2-5 | 2-3 | 6-8 | 7.5 |
ZLCⅡ-11 | 80×65 | 10 | 6 | 2-5 | 2-3 | 6-8 | 11 |
ZLCⅡ-15 | 80×65 | 14 | 10 | 2-5 | 2-3 | 6-8 | 15 |
ZLCⅡ-22 | 100×80 | 21 | 13 | 2-5 | 2-3 | 6-8 | 22 |
ZLCⅡ-30 | 100×80 | 28 | 15 | 2-5 | 2-3 | 6-8 | 30 |
ZLCⅡ-37 | 130×100 | 35 | 19 | 2-5 | 2-3 | 6-8 | 37 |
ZLCⅡ-45 | 130×100 | 41 | 23 | 2-5 | 2-3 | 6-8 | 45 |
ZLCⅡ-55 | 150×125 | 50 | 28 | 2-5 | 2-3 | 6-8 | 55 |
ZLCⅡ-75 | 150×125 | 65 | 38 | 2-5 | 2-3 | 6-8 | 75 |
ZLC-Ⅱ110 | 150×125 | 100 | 55 | 2-5 | 2-3 | 6-8 | 110 |
当处理难溶废纸如含湿强剂的废纸时，亦可更换五～六阶梯的转定子。
When dealing with insoluble waste paper, such as wet strength agent, the stator of five to six level can also be replaced.
三、主要结构
多功能高效磨浆除砂疏解机主要有刀片的截头圆锥形的转子和截头圆锥形的外壳及间隙调节机构构成，浆料由外壳的小端送入，由大端排出，使转子对外壳作轴向相对移动来实现的。采用弹性圆柱销联轴器，噪音低。转子两端为双列向心球面滚子轴承支撑，提高了轴的刚度和强度，噪音大大降低，机器转速平稳无明显振动。转子、定子、齿盘材质采用合金铸铁齿盘，使用寿命大大提高。
3. Main structure
The multi-function and high-efficiency grinding and sand removing fluffer mainly consists of a conical cutter of blade, a conical cutter shell and a clearance adjusting mechanism. The pulp is fed into the small end of the shell and discharged from the large end, which enables the rotor to move relative axially to the outer shell. Adopting elastic cylindrical pin coupling make it low noise. The two ends of the rotor are supported by double-row centripetal spherical roller bearings, which improves the stiffness and strength of the shaft, greatly reduces the noise, and the machine speed is stable without obvious vibration. The material of rotor, stator and gear plate adopts alloy cast iron toothed disc, and its service life is greatly improved.
