北京集智达智能科技有限责任公司
免费会员

VMC 1100

参  考  价面议
具体成交价以合同协议为准

产品型号

品       牌

厂商性质生产商

所  在  地

更新时间:2022-01-25 10:27:15浏览次数:211次

联系我时,请告知来自 智能制造网
同类优质产品更多>
VMC 1100 7 All-In-One Vehicle Computer with Touch Screen and Multifunctional Tracker· 主要特点· 7 WVGA TFT LCD Monitor with resistor touch screen· Built-in Inte......

VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel® Atom™ processor, is designed for transportation applications requiring real-time vehicle tracking. Adopting the latest low power consumption processor and integrating a WVGA LCD with a brightness of 400nits and a 4-wire resistive touch sensor, VMC 1100 does not compromise with its space to sacrifice its functional features. It provides dual CANbus, RS-232, RS-485, USB 3.0, GPIO, analog input, PWM and LAN signal. For security, VMC 1100 supports real-time vehicle tracking through GPS and SMS/GSM/GPRS. VMC 1100 can also be upgraded to a different LCD resolution and include other features such as LTE, projected capacitive touch, CANbus protocol support and backup battery.

General

Cooling System: FanlessEnclosure: Plastic PC + ABS with aluminum die casting heatsinkMounting: Support VESA 75, stand mountingFour SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPSPower Input: 9 ~ 36VDC input with IgnitionPower Consumption: 26WIngress Protection: Front panel IP54Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")Weight: TBD

LCD Panel

7-inch TFT LCD Panel with LED Backlight800 x 480 pixels (WVGA)Brightness: 400 cd/m² (typical)Contrast ratio: 600:1 (typical)

Touch Screen Sensor

4-wire resistant touchAnti-glare coating surfaceTransmission rate: 78 ± 3%

CPU & Chipset

Intel® Atom™ Dual Core E3825 1.33GHz

Memory

One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)
- Default 2GB

Expandable Storage

1 x SATAIII SATA DOM Slot (available option 16G and 32G)

Expansion

1 x Half mini-PCIe socket (PCIe + USB) for WLAN option1 x mini-PCIe socket ((USB + UART) for WWAN option)1 x External module for OBD/Battery module option(UART + USB)

I/O Interface-Front

F1 ~ F5 functions keyLight SensorInternal Mic-in2 x Built-in 2W speakers3 x LED indicators (Power mode, Storage and WWAN status)

I/O Interface-Lateral

Right side
- 1 x Micro SD card socket
- 1 x SIM card socket
- 1 x USB 3.0 host type A connector
- 1 x Mic-in, Line-outLeft side
- 1 x Power button
- 1 x System reset button
- Volume up/down or Brightness up/dow

I/O Interface-Rear

1 x 5-pin Circular connector for Power/Ignition input1 x RJ45 for LAN1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)1 x DB9 (Male) for
- RX/TX or RS-485
- 2 x CAN Bus 2.01 x DB15 (Female) for
- GPS dead reckoning interface (optional)
- 2 x PWM, 2 x Analog Input, 3 x GPO, 3 x GPI
Analog Input requirement for Voltages are measured
Channel: 8
Voltage range: 0 ~ 38V
Resolution: 8 bit
Analog Input requirement for Frequency, Speed
Square wave
Frequency signal offset voltage range: 0 ~ 15VDC
Protection: +/- 500V spike
Frequency signal duty cycle range: 10% ~ 90%

Communication Module

1 x On board GPS module1 x WLAN or Bluetooth module for optional1 x WWAN module for optional

Power Management

Selectable boot-up & shut-down voltage for low power protectionHW design ready for 8-level delay time on/off at user's self configurationPower on/off ignition, software detectableSupport S3 and S4 suspend mode; wake on RTC and SMS

Operating System

Windows 8 Professional, WES8Windows 7, WES7Linux Fedora (kernel V3.2.0)

Environment

Operating temperatures: Ambient with air -20°C to 60°CStorage temperatures: -30°C to 80°CRelative humidity: 10% to 95% (non-condensing)Vibration (random): 3g @5 ~ 500HzVibration
Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24Shock
Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

Power Design & Protection

Load dump and inductive load protection

Cold cranking protection

Transient voltage protection

Electrostatic discharge protection

Standards/Certifications

EMC
- CE, FCC class BPower
- SAE J1113
- SAE J1455
- ISO 7637-2Safety
- EN 60950-1 LVD

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

X
该信息已收藏!
标签:
保存成功

(空格分隔,最多3个,单个标签最多10个字符)

常用:

提示

X
您的留言已提交成功!我们将在第一时间回复您~
在线留言